JBuilder8 configuration cvsNT 2.0

zhaozj2021-02-11  204

JBuilder8 configuration cvsNT 2.0

Author: abigfrog (Millennium Elf) cuqq@hotmail.com

CVSNT configuration

1) to www.cvsnt.org download CVSNT2.0 version

2) Install CVSNT

3) Create a CVS code warehouse (Repository). Methods as below:

a) Figure 1, select the [Repository Prefix] check box;

figure 1

b) Select an empty directory as a directory you want to create a code warehouse, and choose E: / Javaroot

c) There will be an error message, click OK, according to the error prompt at the command line to initialize the code warehouse;

d) At this time, there should be an root directory in the Valid Repository roots list. OK in the next question created the prompt point. At this time, the Valid Repository Roots list will be one, similar to "/ guestbook";

figure 2

e) Select the "Advanced" tab, select all check boxes, and restart two services. Figure 2. Ok, the CVS server configures users Please refer to other relevant information, which is here to talk about the relevant content of the JBuilder8 configuration CVS. At this point, the CVS server is configured. Let's go to the JBuilder8 environment.

2, configure jbuilder8

1) Open JBuilder8, select CVS as version controller in the Team menu.

image 3

2) [Team] -> [Place Project INTO CVS], pops up as shown in Figure 3. Enter your working directory path in Repository Path, here is "/ GuestBook" - no quotation marks. Then click Next, you can take the system default. At this point your project has successfully imported the code library, you can manage it through Check IN and Checkout.

转载请注明原文地址:https://www.9cbs.com/read-3843.html

New Post(0)