Due to work relationship, you need to install HP servers, you know that it is not as simple as installing desktops, but you have confidently installed, because in the process of the implementation of Sinopec Human Resources Project, it is HP server, although not to install it, But the installation process still has a lot. But during this actual installation process, it is still very hard. In order to encounter similar tasks in order, it is specifically recorded as follows.
1. Server connection power, display, keyboard, mouse, insert disk array, server power is powered. The screen display prompt information is operated according to the prompt.
2, the optical drive is inserted into the random CD (SmartStart) and enter the boot interface of SmartStart. Select "English" language, "agree" protocol, enter the interface, select "Maintenance", select "Maintenance", see all the disk, select all the disk, select the way RAID (RAID0, RAID5), establish a logical partition (CREATE LOGICALS), check RAID operations after confirmation. After a few minutes, RAID ended, will see Logical Drivers 1. After confirming.
3. Select SETUP in the SmartStart Boot Interface, select the version of the operating system according to the prompt, install the appropriate operating system. During the installation of the operating system, pay attention to the space size of the custom C disk, otherwise it will default to all hard drives. Waiting for a longer time during the "preplay for operation system installation" process. After the end, you will be prompted to exit SmartStart, insert the operating system, will start copying system files, the entire process is particularly long, about an hour or so. The rest of the operation will go down step by step according to the prompt.
The operating system is installed, no additional driver is required.
For the first time I wrote blog, I don't know if I write clear, I will continue to work hard in the future!
