1. Structural analysis with common front and rear processors
Hypermesh: Grid division (before and after processing) special software, it is a boss
http://www.altair.com/
Femap: A few people, its products have been sold by major software (including MSC / Nastran), have proud performance. SDRC-> EDS.
http://www.eds.com/products/plm/femap/
MSC / Patran: MSC grid division software, front and rear processor.
Http://www.mscsoftware.com.cn/products/patran2001/patran2001.htm
2. Institutional analysis software
Adams: http://www.adams.com/
3. Design engineer with CAE analysis software
DesignSpace, ANSYS simple analysis software
Http://www.ansys.com.cn/designspace.htm
Simple Analysis Software for VisualnaStran, MSC / Nastran
http://www.mscsoftware.com/offers/
Cosmos / DesignStar: Cosmos / Nastran's simple analysis software
http://www.cosm.com/dstar.htm
This type of software only requires the user to add boundary conditions and load conditions on the geometry, and calculate the solution after the automatic grid division.
4. Implicit linear and nonlinear structure analysis software
ABAQUS: Boss in implicit nonlinear structure analysis software
http://www.hks.com/
MSC / Marc, before Marc operation is not good, by MSC mergers, nice nonlinear structural analysis software, the front and rear processor Mentat may be replaced by Patran.
http://www.mscsoftware.com.cn/products/marc/marc.htm
ANSYS: Professional Demonstration, there are people in the analysis.
http://www.ansys.com.cn/
Adina,: Professor MIT Professor K.J.BATHE. Nice nonlinear structure analysis software
http://www.adina.com/
MSC / Nastran, the boss in the linear structure analysis software is that the LINK of CAD is weaker. It is grateful that it will be in Catia as a solver like I-DEAS.
http://www.mscsoftware.com.cn/
I-DEAS: Because Ford has a cooperative relationship with SDRC, the software provides CAE analysis functionality commonly used in automotive parts development. Since the FEM model is directly Link direct LINK, the shape can be easily modified and then calculated.
http://www.eds.com/products/plm/ideas/simulation.shtml
COSMOS / WORKS: Former Cosmos / Nastran improvement version.
http://www.cosm.com/Works.htm
SAP2000: The SAP5 divided by Berkley, California University, has been changed to SAP85 by Professor Peking University.
http://www.csiberkeley.com/products/sap2000.htm
CAEFEM: Written with C , there is small memory to say large-scale calculations.
http://www.caefem.com/
......
5. Explicit nonlinear structure analysis software
LS-DYNA: (US) Out of the impact, collision, blasting, punching processing and other analysis in recent years, more than 100 material models can calculate an analysis including humans.
http://www.lstc.com/pam-crash: (France) The impact collision analysis software of the PAM series is the same mother with LS-DYNA, and has been adopted by many car companies.
http://www.esi-group.com/products/index.html
Radioss: (France) includes large analysis software for structural impact collisions, fluid CFD, noise, etc.
http://www.radioss.com/
Dytran: impact collision analysis software developed by MSC
Http://www.mscsoftware.com.cn/products/dytran2002/Dytran2002.htm
Madymo: (Netherlands) Car collision analysis software, the body model is good.
http://www.automotive.tno.nl/smartsite.dws?id=537
6. Computational fluid mechanics analysis software (CFD)
Star-cd: (UK) CFD analysis software such as hot fluid, 2 phase flow, chemical reaction.
http://www.cd.co.uk/
Pam-flow: (France) PAM series CFD software
http://www.esi-group.com/products/index.html
Fluent: (USA)
http://www.fluent.com/
Scryu / Tetra: (Japan) Easy hot fluid flow analysis software
http://www.cradle.co.jp/eindex.htm
Flow3D: (USA)
http://www.flow3d.com/
Fire, SWIFT, FAME: (Germany) AVL engine CFD analysis software, cylinder internal combustion, etc.
http://www.avl.com/
Icem: Subderectioned by ANSYS
http://icemcfd.com/
Gridgen, FieldView:
http://www.pointwise.com/
Radioss: (France) has a fluid noise calculation module
http://www.radioss.com/
CfDesign: (USA)
http://www.cfdesign.com/
7. Audio analysis software
Sysnoise: (Belgium) Noise Analysis Software of LMS, is adopted by major auto companies.
http://www.lms.be/
I-DEAS VIBRO-ACOUSTIC: With I-DEAS interface, MTS's noise analysis software. Modules with FEM and BEM.
http://www.mts.com/nvd/software/ideas.htm
8. General optimization analysis software
ISIGHT: The most common optimization analysis software can be used for linear, nonlinear structural analysis, CFD, injection analysis of MoldFlow and other optimization analysis.
http://www.engineous.com/index.htm
Visualdoc: is also a general optimization analysis software.
http://www.vrand.com/visualdocinfo.htm
MSC / OPTISHAPE: There are many structural optimization analysis software. Can't pay attention to the topology and shape optimization has begun to be applied in production design.
http://www.mscsoftware.com.cn/products/optishape/optishape.htm9. Production process simulation software
MoldFlow: Includes the flow of injection molding, mold cooling, contraction, warpage and other plastic process simulation. It is the boss in the peer.
http://www.moldflow.com/
Planets: Japanese production MoldFlow
Http://www.plamedia.co.jp/ENGLISH/index.html
Timon: 3D injection molding simulation software developed by Toray (material vendors) in Japan.
http://wwwe.3dtimon.com/english/index.html
Moldex3D: Taiwan production moldflow
http://www.corech.com.tw/chine/news/index.htm
PROCAST: Cast Simulation Software.
http://www.ues-software.com/
