The server is installed first, and the redhat AS3 comes with it, and automatically installs. You don't need to do any configuration. You can run the VNC in any user. Run the command to start a server for VNCServer, and there is a code, such as: 1: 2, etc.: Use the command vncserver -kill: 1, turn off the corresponding Server first startup VNC use the TWM client, if you want to use the full GNOME client to start the VNCServer's home directory CD ./vnc vi xstartup Two before # # # 去, then restart from VNCServer
The client uses VncViewer, does not need to install, run the server written IP code, such as www.xxx.com.cn: 1, OK Enter the password can be used
Explanation: The content of the article is relatively simple, dedicated to those beginners as a reference. The article is divided into two parts, the first part is VNC introduction, the second part is the installation and use of VNC. The article summed up for the younger brother with the actual operation of the younger brother. If there is any error and omissions, please also point out. Fish_ys 2003.8.25 "WT58? Dairy Ranger Forum - NENU [Northeast Normal University]" VNC Introduction "network remote control technology refers to a computer (main control) to control another computer (controlled ), And when the main control is on the control terminal, it is as used as the user who personally operates before the controlled end.
To perform the controlled application, and use the controlled system resources. VNC (Virtual Network Computing) is a software that is operatively remotely operated by AT & T Laboratory, which adopts authorization terms, anyone can get this soft.
Part. The VNC software is mainly composed of two parts: VNC Server and VNC Viewer. The user must first install the VNC Server to the controlled computer to execute VNC at the host.
Viewer controls the controlled end. (In Windows, Pcanywhere, which is also launched by a famous network remote control software - Symantec, supports multiple operating systems, such as Unix Series (UNIX, Linux, Solaris, etc.), Windows and MacOS, so VNC Server and VNC Viewer
Installed in different operating systems, respectively. If the currently operating the host computer does not have VNC Viewer, you can also control the controlled end through a general web browser. How the entire VNC running workflow is as follows: (1) VNC client connects to VNC Server via a browser or VNC Viewer. (2) VNC Server transmits a dialog window to the client, requires the input connection password, and the accessible VNC Server display device. (3) After entering the online password on the client, VNC Server verifies whether the client has access rights. (4) If the client passes the VNC Server authentication, the client requires VNC Server to display a desktop environment. (5) VNC Server Requires X Server to confirm the screen display control by X Server is responsible for the VNC Server. (6) VNC Server will send to the client by the VNC communication protocol by the X Server desktop environment and allows the client to control the desktop environment and input devices of VNC Server. ? Dairy Ranger Forum - NENU [Northeast Normal University] "VNC Installation and Use" I operate: Controlled RedHat 8.0, Master Windows XP. 1. VNC Server and VNC Viewer. VNC Server download address: http://www.linuxeden.com/download/softdetail.php? Softid = 744 VNC Viewer Download Up: http: //download.pchome.net/php/dl. PHP? SID = 2603 2. installation. R, RPM -UVH VNC-3.3.6-2.i386.rpm (If you are a source code, please see the instructions in the package), install Winvnc.exe 3. Start VNC Server on Linux to execute the vncserver command: [Root @ Linux root ] # vncserver 3you will Require a password to access you desktops. Password: ---- In order not to want anyone, it can be arbitrarily remotely controlled. Therefore, when the VNC Server is started, the VNC Server is started, the password of the network remote control will be required. New 'x' desktop is Linux: 1 ---- Be sure to remember this line will be used later. Creating Default Startup Script /Root/.vnc/xstartupstarting Applications Specified In /Root/.vnc/xstartup log file is /Root/.vnc/linux: 1.log (After the above steps, the VNC Server is started. If you Want to change the password for VNC Server, just execute the vncpasswd command.) 4. Run "VncViewer.exe" on Microsoft Windows, and the "Connection Details" dialog box appears. Enter the IP address of VNC Server in the "VNC Server" text box in the "Connection Details" dialog box (see 3. Look at 3. Launch the VNC Server on Linux, New 'X' Desktop is Linux: 1 Get this information), for example: 192.168.0.1: 1 (1 behind the colon is the display of VNC Server generation
Device number, after clicking the "OK" button, the VNC Server will start checking the information entered. If an information is wrong, the system will appear error message: if the information is correct, it will appear " VNC Authentication dialog. If the password entered in the "VNC Authentication" dialog is correct, you can successfully open the Linux desktop window. 5. Remote remotely from the browser. After starting the VNC Server, open the browser directly, enter the controlled URL or IP address in the address bar, and add the port number of ": 5800 display number" after the URL to manipulate the calculation.
machine. For example: http: //192.168.01.: 5801 (If the number is displayed 1, the display number of the first setting is 1, use 5800 1 = 5801.)? Dairy Ranger Forum - NENU [Northeast China] Ranger's intersection 6. FAQ = a. Why don't you display your desktop, just a Terminal window? Try to modify /Root/.vnc/xstartup, turn the last line Twm & OR KDE & (It is said that KDE is not very stable in the current VNC Viewer) W3? Dairy Ranger Forum - NENU [Northeast China] Ranger gathered B. Why can't you connect it after restarting VNC Server? Because the VNC Server is restarted, the system specifies a new display number, you need to use this new number, otherwise it will not be connected. ? Dairy Ranger Forum - NENU [Northeast Normal University] Source: http://www.chinaunix.net/forum/4/20030622/97603.html
