VPDN Enable No vpdn logging <= Since the PPPoE application of ADSL is implemented by virtual dialing, the function of VPDN is required in the router! VPDN-Group PPPoE <= PPDN-Dialin Protocol PPPoE <= setting Dial-up protocol is PPPoe! Interface FasteThernet0 <= Set Company Internal Network Address IP Address 192.168.0.1 255.255.255.0 IP NAT INSIDE <= To enable NAT conversion, set the fast Ethernet port for internal network, the original address of the data received from the internal network Convert to public network address! Interface ATM0 <= Set ADSL port no ip address <= please do not set address no atm ilmi-keepalive bundle-enable DSL Operating-mode auto Hold-Queue 224 in Interface ATM0.1 Point-To-Point < = ADSL communication relies on VC, so you must set a point-to-point VC PVC 8/35 <= set PVC's related parameters, that is, VCI and VPI values, if you do not know, please contact the PPPoE-Client Dial-pool-Number 1 <= PPPoE dialing process uses a regular dial process, here reference Dialer-pool 1! Interface dialer1 <= established a virtual dial port IP address Negotiated <= Dynamic address, the address must be set to negotiate IP MTU 1492 <= Modify the MTU value to be used for the ADSL network ip nat outside <= to enable NAT conversion, set this port for external network encapsulation PPP <= frame format Dialer Pool 1 PPP Authentication Pap Callin <= Set dialing Validation method is PAP PPP PAP Sent Vip Pass Vip <= Send User Name and Password IP NAT Inside Source List 1 Interface Dialer1 OverLoad <= Set NAT conversion mode, using Dialer 1 port Dynamic Address IP Class IP Route 0.0.0.0 0.0.0.0 Dialer1 <= Transfer all the non-routed data to the ADSL line, set the default route NO IP HTTP Server! Access-list 1 permit 10.92.1.0 0.0.0.255
