Photoshop Tools Panel Skill Tools Panel Skills
Quick open files
Double click on the background of Photoshop (the default is a gray display area) to open the browse window of the selection file.
2. Change the color of the canvas free
Select the paint bucket tool and hold down Shift Click on the edge of the canvas to set the background color to the currently selected foreground color. If you want to restore the default color, set the outlight of 25% grayscale (R192, G192, B192), hold down the Shift Click on the edge of the canvas.
3. Select the shortcut key of the tool
You can quickly select a tool in the toolbox by pressing the shortcut, and the letter shortcuts of each tool are as follows:
Selection box -M mobile-V set -L magic stick -w
Spray gun -J brush -B pencil-N rubber stamp-S
History Brush -Y Eraser - E Blurred - R Dilling - O
Pen-P text-T metrics -U gradient-g
Paint Barrel-K Suction -i Clap - H Zoom - Z
Default foreground and background color-D switch foreground and background color -X
Edit mode switch -Q display mode switch -f
Also, if we hold down the Alt key and click the displayed tool icon or hold down the SHIFT button and repeat the alphabetic shortcut, you can loop the hidden tool.
4. Get precise cursor
Pressing the Caps Lock button to display the cursor of the brush and the magnetic tool as an exact cross line, then restore the original.
5. Show / hide the control board
Press the Tab button to switch to display or hide all the control boards (including the toolbox). If you press SHIFT TAB, the toolbox is not affected, only other control panels are displayed or hidden.
6. Quick restore defaults
Some people who are not good at photoshop are really a variety of times in order to adjust the satisfaction. The results found that the original default effect is best, this is stupid, regret it, I can't, I can't be the original! How to recover to the default? Try to touch the tool icon on the option bar, then select "Reset Tool" or "Reset All Tools" from the context menu.
7. Free control size
The shortcuts of the zoom tool are "Z", and the "Ctrl Spacebar" is the enlargement tool, "Alt Spacebar" is a reduction tool, but it can be scaled with the mouse click; the same PTRL " " key and "-" key The images can also be amplified and narrowed; CTRL Alt " " and Ctrl Alt "-" can automatically adjust the window to display the full screen zoom display, you can use this tool you can display in the case of how much the picture is displayed Can browse full screen! If you want to automatically adjust the window by using the zoom tool, you can click the "Full Cable Display" option in the Properties Bar of the Scalable Tool.
8. When using a non-Hand Tool (Hand Tool), press and hold the space bar to convert to a hand tool, which is the visible range of the image within the window. Double-click the mouse on the hand tool to make the image in the most suitable window size, double-click the mouse on the zoom tool to make the image display at 1: 1.
9. When using the ERASE TOOL (eraser tool), press and hold the Alt key to switch the eraser function to the specified step recording state.
10. When using the Smudge Tool, press and hold the Alt button to apply the purely smear to the foreground color.
11. To move the word pick-up range to use the Type Mask Tool (Text Mask Tool), you can switch to the fast mask mode (switch with shortcut key Q), then move again, and then switch back to standard mode I.e.
12. After holding down the Alt key, use the Rubber Stamp Tool (Rubber Stamp Tool) to click on any open image window, you can set a sampling position within the window, but does not change the window. 13. When using the Move Tool (Mobile Tool), press the direction button on the keyboard to move the image on the layer from 1 Pixel. If you first press the SHIFT button, press the direction button again 10 Pixel Moving image. Press the ALT key to the selection will move the copy of the constituency.
14. When using a magnetic rope or magnetic pen tool, press "[" or "]" to increase or reduce the sampling width in real time (in the option palette).
15. Measurement tools are very convenient on the measurement distance (especially on the oblique line), you can also use it to be angled (like a plurality of anglers). Under the premise of the information panel, select the metric tool to click and drag a straight line. Press and hold the Alt key from the node of the first line, drag the second straight line, which two lines between the two lines and lines The length is displayed on the information panel. Drag the measurement tool to move the measuring line (or one node of the measuring line can also be moved separately), which can be removed to the measuring line to the canvas.
16. Use the painting tool such as a brush, a pen, etc.), hold down the SHIFT key with the mouse, can connect two click to line.
17. Press and hold the Alt key Use the straw tool to select the color to define the current background color. Monitor the color change of the current picture by combining the color sampler tool (SHIFT I) and the information panel. The color value before and after the change is displayed next to its sampling point number on the information panel. The color mode of the sample point can be defined by the pop-up menu on the information panel. To increase the new sampling point, simply use the color sampler tool with color sampler tools, and hold the ALT key click to remove the sampling point. But only four color sampling points can be placed on a picture. When there is a dialog box (for example: color order command, curve command, etc.) pop-up, add a new sampling point, you must hold down the SHIFT button and click on Alt Shift Click to lose a sampling point.
18. The cutting tool must be used, this situation you must also encounter; when you adjust the cut grip, the cut box is more close to the image boundary, the clipping box will automatically attach the edge of the image. On, you can't cut the image accurately. However, just take the "ctrl" button when adjusting the cutting border, then the cut box will serve the post, let you crop.
Replication skills
19. Press and hold the CTRL Alt button to drag the mouse to copy the current layer or the selection content.
20. If you have recently been copied in a clipboard, Photoshop will use the size of the new figure as the size of the new map as the size of the newly created drawing when there is a new file (Ctrl N). To use this feature and use the last setting, hold down the Alt key (Ctrl Alt N) when open.
21. If you create a new work, you need a file with a file that has been opened with an open picture. Select "File" → "New", click the Windows option of the Photoshop menu bar, click on the name of the open picture name on the pop-up menu, yes, it is so simple!
22. Press the ALT key (Ctrl Alt T) when using the free transform tool (Ctrl T), then copy the original layer (CTRL SHIFT T) after the current layer is copied. In order to perform the last transformation again, Ctrl Alt Shift T is re-executed after copying the original map.
23. Using "Copying the new construction (Ctrl J)" command can complete the copy to paste and cut into paste between steps between steps; by copying (cut) ) The new layer will still be placed in the original place when it is pasted, however pasted by copy (cut), it will be attached to the center of the picture (or selection).
24. To copy the image directly without wanting the naming dialog, press and hold the Alt key before executing the "Image" → "Copy" command. 25. Photoshop's clipboard is very easy, but you prefer to use the Windows system clipboard directly to process images taken from the screen. Ok, press CTRL K, put "Outter to Clipboard" point on the pop-up panel!
26. Regular replication in Photoshop
When you are designing, we will often place certain elements to seek a form of beauty, and you can easily derive the combination of four shortcuts in Photoshop.
(1) Select the object you want to copy;
(2) Press CTRL J to create a floating Layer;
(3) Confirm after rotating and moved to the appropriate position;
(4) You can now press "T" and then press "T" to regularly copy the continuous objects after pressing Ctrl Alt Shift. (I only hold Ctrl Shift, just regular movement)
27. When we want to copy selected objects in the file, use the copy command in the Edit menu. Copy one time you may not feel trouble, but you have to copy multiple times, and once a click, you're quite inconvenient. At this point you can select the object first, then click the mobile tool, then hold the "Alt" button. When the cursor becomes a black or white overlapping two arrows, drag the mouse to the desired position. To copy multiple times, just relax the mouse.
28. You can use the optional frame tool or a settling tool to drag the selection from one document to the other.
29. To establish a replication document for the current historical state or snapshot:
(1) Click "Creating a New Document from the Current Status" button;
(2) Select a new document from the historical panel menu;
(3) Drag the current state (or snapshot) to the "Creating a New Document from the Current Status" button;
(4) Right click on the status (or snapshot) Select a new document from the pop-up menu to drag a history state of the current picture in the historic state to another image. You can change the content of the target. Press and hold the Alt key to click any historical state (except for the current, the most recent state) can copy it. The status that is then copied becomes the current (most recent) state. The steps in the ALT drag action can be copied to another action.
Selection skills
30. When dragging the selection zone or layer from one document, hold down the SHIFT key to place it in the destination document. If the source document and the size of the destination document are the same, the dragged elements are placed in the same place as the source document (rather than being placed at the center of the canvas). If the destination document contains the selection, the dragged element is placed at the center of the selection.
31. Click the triangle button in the upper right corner, select the load action from the pop-up menu, enter the PhotoshopGoodiesActions directory, there are buttons, specifications, commands, image effects, text effects, textures, and frames. The action set contains a lot of practical things! In addition, there is an Actions.pdf file in this directory, which can be opened with Adobe Acrobat software, which details the method of use and the resulting effect of these actions.
32. Click the brush tool in the toolbar, click the small triangle on the right side of the touchpad label in the subsequent displayed attribute bar. In the pop-up menu, click the small arrow to select "Load Brush ...". Select * .abr in the brushes folder of Photoshop Directory. It has so much lovely thing here.
33. Picture of a beautiful mark and want to reuse in the work? Good to do it, select it with a set of cable tools, select "Save Brush ..." in the pop-up menu of Brushes, then use the brush tool to select this new pen .....................
34. If you want to select a part between the two selection zones, press and hold the SHIFT and Alt keys while the existing selection area is used to drag, draw the second selection area (a multiplication number next to the mouse cross The zone that represents the coincidence will be retained). 35. Remove the square or circle in the selection area, first add any of the selection zones, then in this selection area, press the ALT key to the rectangular or elliptical mask tool. Then loosen the Alt key, hold down the Shift key, drag to you satisfied. Then release the mouse button first release the Shift key.
36. Delete a selection area from the center, in any of the selection area, first press the Alt key to the rectangular or elliptical mask tool, then loosen the Alt key once again, and finally release the mouse button again. Loosen the ALT key.
37. When you want to quickly switch the mask area or select the area option, first click on the Alt key and then move the cursor to the fast folding mode icon.
38. When using the box tool, press and hold the SHIFT button to draw the square and the regular selection; press and hold the Alt key to set the selection from the starting point.
39. Use the "Researcher command (Ctrl Shift D) to load / recover the previous selection.
40. Press the Alt key when selecting the setup tool to switch between the setup tool and the polygonal settles. Press and hold the space bar when you select the constituency. You can move the selection that is taking.
41. Press and hold the Ctrl key to click the icon (on the layer panel) to load its transparent channel, then press the Ctrl Alt Shift key to click another layer to select the transparent channel of the two layers.
42. Switch to fast mask mode between zoom or copy images [q] can retain the original constituency.
43. How to use the Shift and Alt keys in the Select Box tool:
When using the "Select Box", you want to expand the selection area. When you hold the Shift key, the cursor " " will become "ten ", drag the cursor, so that you can reproduce your place. The selection area required. Or two or more selected boxes are simultaneously selected in the same parallel image.
When using the "Select Box", you want to subtract redundant pictures in the "Select Box". At this time, "Alt" button, the cursor " " will become "Ten -", drag the cursor, so You can leave the pictures you need.
When using the "Select Box", you want to get the part of the two selection frames, then hold the "Shift Alt" button, the cursor " " will become "ten í", drag the cursor, so you want Part of the part.
When you want to get the front or square in "Selection Box", hold down the "Shift" button, you can.
44. How to use the SHIFT and ALT keys in the "Settings" tool:
Increase the selection range Press the "Shift" button. (The same as the "Select Box")
Reduce the selection range Press the "Alt" button. (Methods and "Select Box" 2)
Two selection frames are superimposed by "Shift Alt" key. (Method and "Select Box" 3 identical)
45. How to use the SHIFT and ALT keys in the Wand Tool:
Increase the selection range Press the "Shift" button. (The same as the "Select Box")
Reduce the selection range Press the "Alt" button. (Methods and "Select Box" 2)
Two selection frames are superimposed by "Shift Alt" key. (Method and "Select Box" 3 identical)
Quick key skills
46. You can quickly browse your image with the following shortcuts:
Home rolled to the upper left corner of the image; END rolled up to the lower right corner of the image; Page Up is rolled up to the image, the bottom Down is rolled to the image below; Ctrl Page Up to the left; Ctrl Page Down Rolling To the right of the image.
47. Press the CTRL button ALT button 0 key to make the image to be displayed in 1: 1. 48. When you want to "tight" (adjust the space between individual letters), first click between the two letters, then press the Alt key to adjust with the left and right direction keys.
49. Restore the settings in the dialog to the default, then press the Alt key first, the CANCEL key will become a reset button, and then click the Reset button.
50. To quickly change the value displayed in the dialog box, first click on that number, let the cursor in the dialog box, and then use the up and down direction keys to change the number. If you press the SHIFT key before changing the value with the arrow key, the change speed of the value will speed up.
51. Photoshop 6.0 adds SHIFT CTRL Z (for step-by-step recovery operations in accordance with operation) Alt Ctrl Z (User Operate can continuously cancel operation in operation) two shortcuts. Press CTRL ALT Z and CTRL SHIFT Z Combination to use these commands in the middle of history (or using menus in the historical panel).
52. Fill function:
SHIFT Backspace opens the fill dialog;
Alt Backspace and Ctrl Backspace combinations are filled in foreground and background colors;
Press Alt Shift Backspace and Ctrl Shift Backspace key combination to fill only existing pixels (maintain transparent areas) when populating the foreground and background colors.
53. The D key on the keyboard, the X button can quickly switch the foreground color and background colors.
54. Draw a straight pen touch with any drawing tool: first click on the start position, then hold down the SHIFT button, then move the cursor to the end point.
55. When opening the CURVE dialog box, click the Curve box after pressing the Alt key to make the grid are finer, and then click the mouse to restore the original.
56. After selecting the tool selection range using a rectangle (ellipse), press and hold the mouse and then press the space bar to adjust the position of the pick box, and then adjust the size of the selected range after release.
57. Increase a rectangle or ellipse that is drawn from the center, in an increase in any one selected area, press the SHIFT key to the rectangular or elliptical mask tool, then release the Shift key, then press the Alt key, finally loose The mouse button releases the ALT key. Press ENTER or RETURN to turn off the slider box. To cancel your changes, press the ESCAPE button (ESC). To increase or decrease the value at 10% increments when opening the pop-up slider dialog, press and hold the Shift key and press the arrow keys or the down arrow keys.
58. When previewing the CMYK mode color of the RGB mode image on the screen, execute the View "→ New View command, then generate a new view, then execute" View "→" Preview "→" CMYK "command It is possible to view images of the two modes to facilitate comparison analysis.
59. Press the SHIFT Key to Improve the Square Tool Limit box as a square or circle; press the Alt key to pull the box to draw the box from the center; press the SHIFT ALT key to move the box tool to start the square from the center Or circular box.
60. To prevent the box from using the cutting tool to adsorb on the picture border, press and hold the CTRL key when dragging the control point on the Cutting Tools box.
61. To correct the inclined image, first use the measurement tool to draw a line as a level of horizontal or vertical direction (such as the horizontal line of the image, the horizontal line between the two), and then select "image from the menu" "→" Rotating Draw "→" Arbitrary Angle ... ", will find the correct rotation angle after opening, as long as it is OK.
62. You can use the cutting tool to complete the rotation and cutting work: first draw a box with the cutting tool, drag the control point on the box to adjust the angle and size of the pick box, and finally press the carriage return to implement rotation And cut. The angle of the measurement tool is also automatically filled in the Digital Transform Tool ("Edit" → Transform "→" Number ") dialog box. 63. All pixels outside the cropping range are lost after cropping images. To cut without loss, you can replace it with the "Canvas Size" command. Although Photoshop warns you will make some cut, for some reason, it does not have all "cut" data outside the screen, but this does not work on the index color mode.
64. When combining the layer, press Ctrl Alt Shift E to copy all the visible layers to the current layer after copying all visible layers. You can also hold down the Alt key when the merge layer will copy the current layer and then merge into the previous layer, but Ctrl Alt E This hotkey does not work.
65. Press the SHIFT BackSpace key to activate the "Edit" → "Fill" command dialog box, press the Alt Backspace button to fill the foreground color; press the Ctrl Backspace button to fill the background in the background.
66. Press the Shift Alt BackSpace button to fill the foreground color into the option box and keep the transparent settings, press the SHIFT CTRBACKSPACE button to keep the background color into the Select box to keep the transparent setting.
67. Press the Alt Ctrl Backspace key to fill the selection or layer from the history, press the SHIFT ALT CTRL BACKSPACE button to fill the selection or layer in the record and keep the transparent setting.
68. Press the CTRL "=" button to make the image display continuously, but the window does not shrink; press the CTRL "-" button to continue to shrink, but the window does not shrink; press Ctrl Alt "=" button to make The image display continues to enlarge, and the window is enlarged; pressing the Ctrl Alt "-" button to make the image display continue to shrink, and the window is reduced.
69. When moving the layer and the selection, hold down the Shift key to do the movement of the horizontal, vertical or 45 degree angle; press the direction button on the keyboard to do one pixel move each time; press and hold the SHIFT button and press the keyboard The arrow keys can do 10 pixels per time.
70. When creating a reference line, press the SHIFT key to adjust the reference line to the scale scale; press the ALT key to change the reference line to change the reference line to horizontally or vertically orientation.
71. In the "Image" → Adjustment "→" Curve "Command dialog box, press and hold the Alt key to click the mouse in the grid line to make the grid line fine or rough; hold down the Shift key and click the control point to select more Control points, hold down the Ctrl key and click a control point to delete it.
72. To copy the image on a layer to another image window in a different layer, you can hold down the SHIFT key when dragging to the destination window, then the image is dragged to the destination window.
73. When using the "Edit" → "Free Transform" (CTRL T) command, press and hold the CTRL button and drag a control point to perform free deformation adjustment; hold down the Alt key and drag a certain control point can be performed Symmetrical deformation adjustment; holding down the Shift key and dragging a control point can be adjusted to scale zoom; press and hold the SHIFT CTRL button and drag a control point to adjust the adjustment of perspective; press SHIFT CTRL to drag Move a control point can be adjusted; press ENTER to use transform; press the ESC key to cancel the operation.
74. In the color palette, press the SHIFT button to click on a color block, replace this color with the foreground; press the Shift Alt key to click the mouse, insert it as a new color block in the order; press The Alt key is clicked on a color block, and the background color is colored; press the CTRL button to click on a color block, and the color block will be deleted. (Posting time: 2004-5-30 21:47:03)
--- YYGX13 J
Cat (1): 75. On the layer, channel, path tuning, press the Alt key to click the tool button at the bottom of these tunnels, and the corresponding dialog changes to the corresponding dialog changes to the tool.
76. On layers, channels, path tuning boards, press CTRL keys and click on a layer, channel or path to load it as a selection; press CTRL SHIFT to click, add to the current selection; press Ctrl Shift Alt key and click, cross the current selection.
77. When using the layer mask in the layers, press the Shift key and click the layer mask to abandon map, there will be a red fork, indicating that the current mask is disabled, press the Alt key and click on the layer Meng Board zoom chart, the mask will be displayed in a whole image to facilitate observation adjustment.
78. In the path tuning board, press and hold the Shift key on the path to the path tuning board to switch whether the mouse can switch whether the path is displayed.
79. After changing the settings of a dialog box, if you want to recover to a previous value, press and live in the Alt key, the cancel button will turn the reset button, click on the reset button.
Path skill
80. After you click on a point on the adjustment path, press the "Alt" button, then click the left mouse button, click on it, then one "adjustment line" will disappear, then click the next path point. It will not be affected.
81. If you draw a path with "path", and the current state is a pen, you only press the carriage return button on the keypad (remember is the carriage return on the keypad, not on the primary keyboard. !), Then the path will change immediately to "select the area".
82. If you draw a path with the pen tool, and now the state of the mouse is a pen, you only need to press the carriage return on the keypad (remember is the carriage return on the keypad, not on the primary keyboard. !), Then the path is immediately loaded as a selection.
83. After holding down the Alt key, click the mouse on the trash can icon on the Path Control Board to delete the path.
84. Press and hold the CTRL button when using the path other tool to temporarily turn the cursor to select the range tool.
85. When holding down the Alt key, click the mouse on the trash can icon on the Path Control Board to delete the path.
86. Press and hold the CTRL button when using the path other tool to temporarily select the range tool.
87. Click on the blank area on the path panel to close all the path display.
88. When you click on several buttons below the path panel (with the foreground color), use the foreground color stroke path to load the path as the selection, press and hold the Alt key to see a series of available tools or options.
89. If we need to move the entire or multiple paths, select the path you want to move and use the shortcut Ctrl T to drag the path to any location.
90. In the outline path, our most commonly used operation is still a single line of the pixel, but there will be problems at this time, that is, the torque teeth exists, which affects the practical value. At this time, we may wish to convert its path to the constituency. Then the constituent is subjected to a stroke, which can also obtain the line of the original path, but the torque teeth can be eliminated.
91. Converting the selection zone to the path is a very practical operation. This feature is consistent with the corresponding icons in the control panel. When this feature is called, the desired property settings will be available in the pop-up Make Work PQTH setting window.
92. Press and hold the SHIFT button when making a path using a pen tool, and hold the path or the direction line to horizontally, vertical or 45 degrees, press and hold the CTRL button to temporarily switch to the path selection tool, hold down the Alt key to put the pen shape on the black node Click to change the direction of the direction, make the curve turn; press the Alt key to select the tool Click the path to select the entire path; if you select multiple paths, you can click on the SHIFT one by one; press the path selection tool The "Ctrl Alt" button will be switched to the plus node and the subtitle strip tool. 93. To switch whether the path is displayed, you can click on the SHIFT button and click the mouse on the path palette, or click on the Path Tuning Gray Area, you can also press Ctrl Shift H. To switch the color mode directly on the Color palette, you can first press the SHIFT button, and then move the cursor to the colors bar.
ActionS action skills
94. To add a command after a command in an action, you can select this command, then click the Start Record button on the tuning board, select the command to add, click Stop Record button.
95. After pressing the CTRL button first, double-click the mouse on the name of the action to be executed on the action control board, you can perform the entire action.
96. To perform several macros together, you can add a macro before you record the macros you want to perform.
97. To add a command after a command in a macro (action), you can select this command, then click Start Recording icon on the palette, select the command to add, then click Stop Recording I can.
Filter skill
98. Filter Shortcut
Ctrl F - uses a just used filter again.
Ctrl Alt F - uses a new option using a just used filter.
Ctrl Shift F - retreats the last used filter or adjustment effect or changes the synthesis.
99. In the filter window, press the Alt key, the CANCEL button will turn into the RESET button to restore the initial situation. Want to enlarge the size of the image preview in the filter dialog box, directly press "Ctrl", click on the preview area with the mouse to zoom in; if the "Alt" key is quickly smaller.
100. The first line of the filter menu records the usage of a filter, which is easy to perform.
101. The effects of opaque and color mixing can be adjusted on the effect of the filter in the panel of the layer (the object of operation must be a layer).
102. The range of feather (Feather) can reduce the feeling of abrupt.
103. When using the "Filter" → "Rendering" → "Cloud" filter, to generate more obvious cloud patterns, first press and hold the Alt key and then execute the command; to generate low-diffuse clouds Effect, first hold the Shift key and then execute the command.
104. When using the "Filter" → "Rendering" → "Light Effect" filter, if you copy the light source within the dialog, you can press and hold the ALT key and then drag the light source to achieve copy.
105. Processing for the selected area. If there is no selected area, the entire image is processed; if only one layer or a certain channel is selected, only the current layer or channel is active.
106. The processing effect of the filter is in pixels, that is, the same parameter processing different resolution images, the effect will be different.
107. RGB mode can use all filters to graphics, and text must become a graphic to filter.
108. Use the new filter to first use the default setup experiment, then give a lower configuration, try again. The process and results of the following changes were observed. Treated with a smaller image, and save the original file, not to use "restore". This makes the operator to compare the result, and write down the settings you really like. 109. Before selecting the filter, the image is placed in a newly established layer, and then the layer is processed with a filter. This method allows the operator to mix the effect of the filter into the image, or change the mixing mode, thereby obtaining the effect. This method can also make the operator in the process of design, change the filter effect of the image at any time according to its own idea.
110. Even if the operator has used the filter layer, it is also possible to select "faded ..." command. When the user uses this command, it is possible to adjust the opacity, but also change the mixing mode. Before ending the command, the operator can use the filter to process the layer with a filter. Note that if "restore" is used, it cannot be changed.
111. Some filters can handle a single channel, such as a green channel at a time, and it can be very interesting results. Note that any filter can be used when processing the grayscale image.
112. Use the filter to perform data processing of the Alpha channel to get exciting results (or grayscale images), and then use this channel as a selection, then apply other filters, and processes the entire image by this selection. This technique is especially suitable for crystal refractive filter.
113. Users can break the appropriate settings and observe what effects occur. When the user does not set a filter in a regular setting, a wonderful special effect can be obtained. For example, the parameters of the virtual mesh or dust and the scratches are high, sometimes smooth, and the effect is particularly good.
114. There is a technology that produces better and special effects, ie, the same (too much). This technology is particularly good in Western Europe for the operator filter. Of course, other filters can be used. The user can also use the same filter, or use a completely different filter, multiple times for the same choice, look at the effect.
115. Some of the effects of some filters are very obvious, and the subtle parameter adjustment can result in significant changes, so it is necessary to choose carefully to avoid the style of each filter due to excessive change amplitude. The transitional image can only be used as samples or examples, but they are not the best art, using filters should also be done according to the needs of artistic creation.
Layer skill
116. To move the current selection: Next "Ctrl ]" key key, you can turn the current layer to the top; press "Ctrl [" key key, you can put the current The layer is turned over down.
117. Drag the layer to be copied to the "New" icon on the top of the panel to create a layer.
118. When moving the layer or selected range, hold down the SHIFT key to move the level, vertical or 45 °.
119. When moving the layer or selected range, press the direction button on the keyboard to make the movement of 1 PIXEL.
120. When moving the layer or selected range, press the SHIFT button and then press the direction button on the keyboard to move each 10 Pixel.
121. When deleting the layer directly, you can first press the Alt key to move the cursor to the trash can on the layer control board.
122. After pressing the CTRL button, your mobile tool has an automatic selection function. At this time, you only click on the object on a layer, then Photoshop will automatically switch to the layer where the object is located; but when You release the CTRL key, your mobile tool is not there automatically, so it is easy to prevent you.
123. You cannot drag multiple layers to another document simultaneously in the level panel (even if they are linked) - this only moves the selected layer.
124. To put multiple layers into a group, the fastest way is to link them and select Group Link Layer Command (Ctrl G). When you want to move multiple layers between different documents, you can use the mobile tool to drag multiple layers at the same time during the document. It can also be used to combine (CTRL E) multiple visible layers (because the current layer is linked to other layers "," the front layer group command "will become a" Grouping Link Layer "command). 125. Press and hold the Alt key between the layer board to click on the two layers. When some layers are in some and you just want to group some of them to group some of them. Because the group command (Ctrl g) is turned to the group link layer command (Ctrl g) when the current layer is linked to other layers.
126. Double-click the layer with "T layer control" panel with the mouse
