First, Server installation and setting 1 Which Client3 is installed, the installation is complete 4, configure the client5, configure the connection to the server 6, connect to the Domino server
First, the installation and setting of Server [Back to the top]
1. Select the installation directory: [Back to the top]
LotusdominOsoServer typically stores the database on the server in the Domino / Data directory in Domino under the Domino / Data directory in the Domino / Data directory.
2. Run Servers / W32intel / Serup.exe Which one is selected according to the actual situation. This is the first one: [Back to the top]
3. Click Next until the installation is complete [Back to the top]
4, server configuration: [return to the top]
Step1:
STEP2:
What do you need to pay attention to:
General web browser selection http
Enterprise Co-Service (DECS) is selected as needed. It provides things that are dealing with relational databases.
Setp4: This is a more important step, which is configured for the new Domino service.
Press the following configuration, the new server will be a server that is called HOMESERVER / HOMEADMIN in the network domain Homecert
The name of the administrator is Xyn
Step5: Edit port, disabled portions
STEP6: Set an access control list item:
At this point, the LOUTS Domino server configuration is complete
5, start the server [return to the top]
Pay attention to the server's 80-port is not occupied by something like IIS. Because Lotus default HTTP port is 80
The interface after starting success is shown in the figure. The first start to create some databases, and apply the configuration made by the configuration period to the server, there may be some slow.
Enter "Q", enter, can stop Server
Second, the installation and setting of the Client side [Back to the top]
1. Select the installation directory [Back to the top]
The client is put below the Lotus / Notes directory. Local databases are stored in the Lotus / Notes / Data directory
2, choose which client installed as needed. Here I choose all Client tools [Back to the top]
3. Take the next step, complete the installation [return to the top]
4, configure the client [Back to the top]
A: Start the Designer in the Start menu. If you are running, you will make you set.
B: You can connect the server at the beginning, but I now use another way:
Don't want to connect to the Domino server -> Use the name as a verification, and enter the administrator name (such as xyn) ->
Do not want to create Internet Mail Users -> Not connected to other news servers -> Not connected to other directory servers ->
Do not connect to the Internet through the proxy -> By renovating the LAN ...
C: This is just set, but it has not been connected to a server.
5, configure the connection with the Domino server (the server that is installed) [Back to the top]
A: Get an administrator verification word
A: In Designer, click Open an existing database -> Select the Local server -> Browse. Open LOUTS / DOMINO / DATA / NAMES.NSF.
When doing this step, confirm that the server is not started.
B: Select "View", find a view that is a view, use Notes preview, you can see that there is already a file, this is the server administrator.
C: Double-click Open, there is a file called UserID below. Right button -> Remove. The extension is scheduled .id. Remember what you put it. This is the server
HOMESERVER / HomeAdmin's verification word for the administrator Xyn / HomeAdmin. The password is the administrator password set when the server is created.
D: Remember to get the Names.nsf close (delete bookmark) in Designer after getting the verification word
B: Establish a connection with the server A: also opens Names.nsf with Designer. Different is the local names.nsf this time.
B: Open an aliasing view of the connection. Notes preview. This records the current client connection information with each server.
C: Click New Connection in the Notes view. Set the connection with the server
-------- In "Basic"
Add connection: LAN
Use the LAN port: TCP / IP
Server Name: Server Name (HOMESERVER / HomeAdmin)
-------- In the advanced
Server IP address (such as 127.0.0.1)
D: Save
6, start connecting the server [return to the top]
A: Start Domnio Server and Designer
B: DESIGNER, select File -> Tool -> Switch the User Identifier. Find out Userid.ID, open, enter the password. (LUCKSERVER)
C: Replace the current place, replace in the lower right corner of Designer, select the current workplace "Office"
D: Edit Current Places: Select "Port" in the open page, remove the ports that are not used, leaving only "TCP / IP".
E: In Designer, click "Open Database", enter the name of the server in "Server", Enter. If the configuration is not wrong, you will see the various databases and templates in the current server.
At this point, the entire Domino server and client configuration are completed
