This article is reproduced, and the reprint is no source, thank the author to the author!
With the continuous update of operating system versions, the volume of Windows is increasing. Due to work, we always want to find a portability, you can walk with you, and operate simple, easy to use. Windows is basically impossible to complete this task. Finally, one day, I found a system-mclinux that can be installed, it is from the Chinese hand, complete Chinese interface, kind and easy to use. MCLinux small file version: 2.02 Size: 1.86M Nature: Free Software Platform: Linux [Click to download] Software Features: 1. You can do network workpieces, you can browse the Chinese webpage, maintain the website, and process letters. 2. You can do HTTP CGI (encrypted directory), FTP, Telnet server. 3. With routers, firewall functions, you can support MODEM dial-up Internet access on LAN, which can also set up dial-in feature, support ADSL broadband dial-up Internet. 4. You can use your hard drive, drive and floppy drive. Put Mclinux into a floppy disk: Download the file named mclinux202.zip, unlaw to any folder, such as C: / Linux. Restart the computer with a Windows 98 boot disk to start entering the DOS interface, insert a blank floppy disk, enter "from the command prompt" A:, then enter the following command to switch to C: / linux directory: A: / C: C: / CD Linux Step 2: Enter the "2M" command to support the system support 2MB floppy disk. Next, enter the "2MF A: / M" command to format the floppy disk as the maximum capacity of 2MB (depending on the brand brand, the value displayed may be 1886kb, it doesn't matter , Continue). Step 3: Enter the "syslinux -sa:" command to make the floppy boot disk. Step 4: Enter the following command to copy the system to the floppy disk: Copy Syslinux.cfg A: Copy Zimage A: COPY MCLINUX.IMG A: Step 5: Set the floppy disk in the BIOS to the first startup device, use the MCLinux floppy disk boot system you just created, "Insert the mclinux configuration disk and press" Y ", otherwise press Enter" First start, go directly to the car. Then enter "root" login, then the system has been loaded into the memory, enter the command "CCE" into the Chinese system. Use the modem to access the first step: Remove the MCLinux floppy disk, change another A blank floppy disk, use the "mkfs.ext2 / dev / fd0" command formatting the floppy disk to EXT2 format; or use the "mkfsdos / dev / fd0" command to format into a DOS format. Step 2: Enter the command "mclinux.conf" System configuration (see Figure 1), select "1", enter the dial network PPP configuration (see Figure 2), three items of "Phone, Account, Password", respectively, corresponding to ISP's Internet Number, user name and password.
Step 3: "MODEM_DEV = TTYS1" To change according to your MODEM, you can open the device manager under Windows to view the COM port occupied by MODEM, if it is COM1, change to TTYS0, if it is COM2 to change TTYS1 is pushed in this class). Then press the "Ctrl X" key button and press the "Y" to exit (Note: Press "Ctrl X" after entering the configuration, there will be "Save: YNL" prompt, "y" means saved, "n" is not saved ). Step 4: Enter the DNS settings to fill in the DNS provided by the ISP service provider into "namesever". (Note: Most regions can be used directly, and a few areas require themselves.) Step 5: Press "8" to set the installed fixed floppy disk, and then start the system next time you can set it. Press "9" to exit the system configuration, "PPP-ON", after a while, then connect the network, "clinks" into the Chinese browser (see Figure 3, the author has made some Chinese website connection wizard, can be Where choosing site), you can also press the ESC key to enter the URL in "File → Go to URL". "CLINKS" is a character browser, so you can only display text information. Tip 1. If you want to disconnect the network, enter the command "PPP-OFF". 2. The system will open the web service function by default. When the Internet is online, type the HTTP: // (IP of the MCLINUX system) with other machines, you can see the system's default home page. The effect of viewing the CLINKS of this system. In addition, this system also adds a client of a dynamic domain name server to facilitate settings a server. Using the FTP function MCLinUX Already automatically opens this service when the system is started and there is an FTP client command, you need to follow the steps below. The first step: set the directory of downloadable file: first establish a map of download file partition (here as an example of the first hard disk first partition) "MKDIR / MNT / HDA1", then use the "mount" command to mount the download file Hard disk partition, "mount dev / hda1 / mnt / hda1". Step 2: Set the logged in user: MCLinux default is anonymous (anonymous) login, you can change in mclinux.conf. Step 3: Send a specified file from the remote machine to the local machine: Enter the "FTP Open Remote Machine Add Username and Password Get Remote Vehicle File". Step 4: Send a specified file from the local machine to the remote machine: Enter "FTP Open Remote Machine Add Username and Password Pub Local File Remote Version" Step 5: Enter ftp from other machines in the network: / /10.70.1.1/ File Name (IP of my computer) can download files from the MCLinux system. Thank you: Before writing this manuscript, the author is only limited to the introduction of the forum. When I decided to write it, I met a lot of difficult problem, I got the generous help of the South China, and the author was in difficult, at this author. Express them heartfelt thanks.
