One. DS15 installation Raiders
1. If the system is pre-installed, you can use: hwmgr -v dev look for the current hard disk according to: hwmgr -v dev / dev / disk / dsk0
2. Skip the first step can be directly self-test, Testing Network ....., press CTRL C to enter >>> mode.
3. In >>> mode, Show B *, you can see Boot_DEV DKA0.0.0.8.0 Boot_OSFLAGS A (Normal start) BootDef_dev DKA0.0.0.8.0 can also via Show CPU, Show DEV, Show Config, Show Mem, etc. . Auto enters >> mode when you want to start, set auto_action halt
4. With Show Config | More, you can see that VGA0 VGB0 is graphics card information, here is Radeon 7500 PCI graphics card. DVA0 is a floppy disk, EIA0, EIB0 is a network card. DKA0 is a hard disk, DQA0 is a drive.
5. Install TRUE64 5.1B. Preparation: a. Mounting Dish (HP Tru64 Operating System Volume1 Disk 1 of 1 November 2002) b. Patch Pow (New Hardware Delivery-7, NHD-7 Version 5.1A / 5.1B)) C. Graphics (ATI Radeon 7500 Graphics Support V1.2 for Tru64 Unix Disk 1 of 1 Radeon_v12) setld -l rad542 d. Accessories Disociated Products Volume1 (WorldWide_Language_support, MultiMedia_Service)
6. >>> B-FL fa -fi "generic" equipment name: DQA0 (optical drive device name) Package: /540/USR/SYS/HARDware/Base.kit partition situation: a 1G root B 4G / 8G SWAP G 10g / usr / var (VAR in USR, default) E 16G / USR / LOCAL F Icon display: A, B, G, E, f Note, this process is cumbersome, the continuous change system disk is required NHD-7 disk, etc. After the system is installed, the second changing process is required after it may be restarted. Second, the NHD-7 plate can be put in the optical drive, and the system disk is not put, prompting the disk, all the way. (Without verification, if it is not, then do it in the third time). After changing the disk, start, may not succeed, enter the single user mode (due to the original pre-installed operating system) Need: DN_SETUP -INIT DSFMGR-K (uppercase K) init 3 (Launch to multi-user mode)
7. Successful installation.
8. UERF -R 300, view the installation of graphics cards. (Randeon0, Randeon1, do not support.)
9. Install the graphics card. MOUNT / DEV / DISK / CDROM0C / MNT CD / MNT SetLD -L RAD542
10. Install WorldWide_Language_support, MultiMedia_Service, etc.
11. Reform resolution: view /var/x11/xserver.conf -pn -screen 1280x1024 -vsync 75 -depteh 2412. Modifying system parameters: view / etc / sysconfigtab generic: RT-preempt = 1 # Starting the internal nuclear sealing capacity, increasing the performance of the application. Proc: Max-proc-per-user = 512 # If the web server can be set to 1024 MAXUSERS = 1024 # If the physical memory is 1G, set to 512, the web server is 2048) per-proc-stack-size = 12097152 Max-per-proc-stack-size = 67108864 per-proc-data-size = 286435456 IPC: shm-max = 286435456 VM: VM-mapENTRIES = 10000000
two. DS15 clone Raiders
1. Put the disk that needs to be cloned, put it in the hard disk.
2. HWMGR-SCAN SCSI detects newly placed hard drives.
3. HWMGR -V dev View the sign of the newly inserted hard drive. (For example: / dev / disk / dsk1c)
4. Disklabel -z DSK1C Clears the content of the newly added dish.
5. Disklabel -r DSK0C> /VAR/TMP/disk0.Label
6. Disklabel -rr -t Advfs DSK1C /VAR/TMP/disk0.Label
7. MKFDMN / DEV / DISK / DSK1A Backup_Root
8. MKFDMN / DEV / DISK / DSK1G Backup_USR
9. Mkfset Backup_Root root
10. Mkfset Backup_USR USR
11. Mkfset Backup_USR VAR
12. Mount -t Advfs Backup_Root # root / mnt
13. VDump -0VF - / | (CD / MNT; VRESTORE -X -F -);
14. Umount / MNT
15. Mount -t Advfs Backup_USR # usr / mnt
16. VDump -0VF - / usr | (CD / MNT; VRESTORE -X -F -);
17. Umount / MNT
18. Mount -t Advfs Backup_USR # var / mnt
19. Vdump -0VF - / var | (CD / MNT; VRESTORE -X -F -);
20. Umount / MNT
twenty one. Put the cloned disk and put it in the new machine.
twenty two. Starting if not normal, execute: / sbin / dsfmgr -e dsk1 dsk0 bcheckrc init 3 If there is a problem, please enter / dev / disk / view, see the specific disk number. Repeated / sbin / dsfmgr-E DSK1 DSK0 BCHECKRC until there is a lot of things. If only simple DSK1C <=> DSK0C, it will not. INIT 3 was successful.
twenty three. After start, modify the IP address and hostname. Hostname MAINT View / etc / hosts, modify the IP address and hostname. View /etc/rc.config, modify the corresponding IP address and hostname.
twenty four. MKFDMN / DEV / DISK / DSK0F App] DOMAIN MKFDMN / DEV / DISK / DSK0E Local_DOMAIN MKFSET Apps_Domain App MKFSET LOCAL_DOMAIN LOCAL MKDIR / Application Mount App_Domain # App Mount Local_Domain # local / usr / local view / etc / fstab Application_Domain # Application ADVFS RW 0 2 Local_Domain # local / usr / local advfs rw 0 2 three. The embodiment ee0, ee1 composition card array #rcmgr set NIFFD YES #rcmgr set NRDEV_0 nr1 #rcmgr set NRCONFIG_0 ee0, ee1 #rcmgr set NR_DEVICES 2 #rcmgr set NETDEV_0 nr1 #rcmgr set IFCONFIG_0 192.168.108.12 netmask array configuration card (UNIX) under on a not been successfully created in a NetRain: 255.255.255.0 #rcmgr set NUM_NETCONFIG 1 is provided in order to reduce the handover delay card, view / etc / sysconfigtab netrain: nr_maxdev = 64 nr_timeout_t = 2 nr_timeout_o = 5 nr_timeout_dead_interface = 3 attention. Add an interface. b. All interfaces must be in the same network segment. c. All interface device types must be consistent. d. The IP address cannot be set before configuring the interface. e. The logo UP must stop.
four. Network device hardware boot check. Catalyst 2950 passes the control port:
En (enable)
Show env all
Show version
Show Process CPU
Show process memory
2811 User: Cisco Password: Cisco
SH Env All Sh Ver SH Diag Dir SH Flash SH Process CPU SH Process Mem Sh Run
