FDISK is a disk partition program well known to PC enthusiasts, which is small, powerful, easy to use. Although there is currently a huge challenge of non-destructive partition software such as PQMAGIC, FDISK is still a preferred partition program for many PC users. Given that the partition operation is a repree of disk structure, it has certain hazards, and Microsoft, which develops the FDISK program, does not publish all parameter switches of the program, so FDISK's functionality is restricted to a certain extent. Through the contact of Microsoft's technicians, I got some unapproved parameter switches on FDISK, introduced to you here, I hope friends can better utilize FDISK's full functions. The command line format of the fdisk program is common syntax for: FDISK / parameter switch unusless parameters and functions are as follows: (arranged in order in the order)
1. / ACTOK parameter function: Do not check if there is a bad sector on disk surface
Function Description: Use the / Actok parameter to speed up the partition operation without checking the disk surface.
2. / CMBR parameter function: Re-establish the main boot record of the specified disk
Function Description: The operation is equivalent to / MBR parameter , can specify a disk.
3. / EXT parameter function: establish an extension partition
Function Description: Establish an extended partition on the current disk (used to establish a logical disk partition).
4. / FPRMT parameter function: Inquiry FAT16 or FAT32 in interactive mode
Function Description: Does not appear to support a large-capacity hard disk when adding a / fprmt parameter, but queries using FAT16 or FAT32 format every time you create a new partition.
5. / Log parameter function: establish disk logical partition
Function Description: Use / log to establish a logical disk, / log must be used at the same time. 6. / Logo Parameter Function: Use the FAT16 format to establish a disk logical partition.
7. / MBR parameter function: Re-establish the main boot record of the primary disk (Master Boot Record)
Function Description: Uninstalling the WindowsNT or Windows 2000 after eliminating the system startup selected on the main boot record; when there is a viral infection, it is used to remove the virus is quite effective.
8. / PRI parameter function: establish a primary partition and set to an activation form
Function Description: Create a primary partition on the disk, and the partition will be automatically set to an activation form. 9. / PRIO parameter function: establish a primary partition using FAT16 format and set to an activation form.
10. / Q parameter function: Do not restart the computer when FDISK
Function Description: Use the / q parameter will not have to restart your computer after changing the partition table.
11. / Status parameter function: Display current disk partition status
Function Description: The expansion partition will not be displayed when there is no logical partition on the disk extension partition.
12. / X parameter function: Do not use LBA properties
Function Description: Use the / x parameter will not produce partitions with LBA properties. With these parameters, using the fdisk program will be more heartbered. However, the risk factor of hidden parameters is larger, but it needs to be used with caution.
