1. download
Helix.Server, (that is, Real Server) open source version, RM media stream server, no restriction version. Support RTSP protocol, support RM, MP3, etc., even commercial, can also be copened. You can go Here download.
https://helix-server.helixcommunity.org/2003/devdocs/builds.htmlhttps://helixcommunity.org/download.php/196/servinst_plus_linux-2.2-libc6-i586-server.bin
2. installation
Unzipped: #tar -zxvf helix_dna_server_10.1.tar.gz
Current path to the directory HELIX_DNA_SERVER_10.1
#CD helix_dna_server_10.1
There are two files, the execution installation command is as follows:
#. / servinst_plus_linux-2.2-libc6-i586-server.bin
The following is the detailed installation process:
Directory: [Here you will give a default installation path, that is, the current directory]: You can enter the specified installation path here. Or use the default path to the carriage return;
Username []: Enter the administrator login name
Password: administrator password, enter the carriage return again;
Some of the ports starting with Port [System Default Port] (such as Port [7070], Port [554]), you can use the default port all along the way. But you need to pay attention to: Port [80], you'd better change it to 8080 or other unused port numbers, because Apache's default port is 80, otherwise it will conflict with your Apache port.
Port [80] has a port [29902], which is like Port [29902], which is your administrator login server port number, must remember, after you are used later.
Next, give the list of parameters set above:
.... Back to the Previous Prompts: [F]: Input f Confirm the above parameter settings, start installing immediately; input P reset.
The installation is complete.
3. Start server
Enter the bin folder of the installation directory
#CD BIN
Start server
#. / hlxserverplus ../hlxserverplus.cfg
The back HLXSERVERPLUS.CFG is your server profile.
If there is no incorrect, you can enter the following operations.
By the way, 2 sentences,
1 "If you want to load Helix Server when you start Linux. Start menu -> Preferences ---> More Preferences ---> Session ---> Startup Program -> Add ---> Start Command, the browsing of the right side is specified ---> OK
Don't forget to add parameters. Example: / home / root / helixserver / bin / hlxserverplus /Home/root/helixserver/hlxserverplus.cfg
/ home / root / helixserver is my Helix_server installation path
2 "Add a shortcut to the desktop. Right-click on the desktop ---> New launcher ---> Name: HelixServer command point browsing specified. Don't forget to add parameters. Example: / home / root / helixserver / bin / hlxserverplus /Home/root/helixserver/hlxserverplus.cfg
/ home / root / helixserver is my Helix_server installation path
4. Server management configuration
Start Mozilla in the address bar input:
Your server IP: The administrator who wants you in front to log in to the port number /Admin/index.html
Normal words, the dialog box will pop up. Please enter the administrator set when you installed login name and password. If it is correct, enter the server configuration interface. Below this explains the most basic configuration:
1> Server IP address binding
Server setup ----> ip binding -----> Click " " on the right side of IP Address, enter the server IP address you want to bind in Edit IP Address -----> Apply ----> Pending changes
2> Newly built contact
Modify the default root root directory
Server setup ----> Mount Points -----> Click Helix Content ---> Change the content below this path to your movie file actually stored, for example I / MNT / DOS / VOD ----> Apply -----> Pending Changes
Client Access: RTSP: // Server IP / 001.RM, for example: RTSP: //192.168.0.200/001.rm
001.RM is your movie file name and can use Chinese name.
Newly built a new contact
Click " " behind the Mount Point Desrtion
EDIT DESCRIPTION The following is a mounting point description that can be entered casually.
Mount Point your hook, after the client wants to access it, such as: / film /
Base Path's content is modified to your movie file actually stored the full path, for example, / mnt / dos / vod ----> Apply -----> Pending Changes
Client Access: RTSP: // Server IP / FILM / 001.RM, for example: RTSP: //192.168.0.200/film/001.rm
It is best to turn off the mozilla, re-landing, and see if the setting is effective. Otherwise, reopen!
After completing the above operation, you can watch a movie. Of course, you can also configure client connections, multicast, IP address restriction, traffic limit, control access users, groups, and so on.
In addition, reinstall, it is best to remove all the original files, otherwise, port configuration is annoying.
Http://linux.chinaunix.net/doc/netconf/2005-02-03/1081.shtml
Http://www.pconline.com.cn/pcedu/soft/gj/media/0312/264655.html
http://soft.mumayi.net/Article/catalog38/108.html
