Since there are three HP DL 580 G2 servers installed in the near future, there is a case where the network card cannot be found when installing the Linux system. After query on support.hp.com, I find out the installation method of the NC7131 model network card in Linux. This document is suitable for NC7170, NC7132, NC7131, NC6170, NC6136, NC6134, NC6133, NC6132, NC310F and other 9 network cards, suitable for HP 580, 360, 570, 530 and other models. (Note: Due to the different batch of HP DL 580 G2 server, the installed network card model is not the same. The author has encountered NC7131, NC7777 and other multi-model network cards of the DL 580 G2 machine) HP support website already The NIC installation package, the name is E1000-Version.src.rpm, where Version refers to the version, such as I downloaded E1000-5.2.39.1C-1.Src.rpm. Please download the installation package on support.hp.com before installation, and then install it according to its installation document, or by following it. The installation process is as follows: 1, first go to / usr / src / linux- Check if there is a Kernel runtime, if not, please install it through the "Kernel Source Code Setup" setting. 2, install E1000-Version.src.rpm, rpm -ivh e1000-version.src.rpm, pay attention to this step is not true installation; USR / SRC / RedHat # rpmbuild -bb specs / e1000.spec suse SLES 7 and UNITEDLINUX installation is: # CD / usr / src / packages # rpm -bb Specs / E1000.SPEC SUSE SLES 9 installation is: # cd / usr / SRC / PACKAGES # rpmbuild -bb specs / e1000.spec 4, check and clear the current E1000 driver version, # Check the current E1000 Diver # rpm -q E1000
# If there is currently E1000 Diver uninstall # rpm -e e1000
# Insurance, please check if the uninstallation is successful # rpm -q e1000 5, installs via RPM, if the installation process can be installed after the fourth step, # Note that your current path should be in step 3 Under the path, such as redhat is in / usr / src / redhat # rpm -ivh rpms / i386 / e1000- .I386.RPM installation E1000.o module should exist in the following directory RED HAT 8.0, Red Hat 7.3, Red Hat 7.2 Professional / LIB / MODULES / / KERNEL / DRIVERS / NET Red Hat EL 3, EL 2.1 / LIB / MODULES / / KERNEL / DRIVERS / NET SUSE SLES 7 / LIB / MODULES / / kernel / drivers / net unittedlinux 1.0 / lib / modules / / kernel / drivers / net suse SLES 9 should have an E1000.ko in this directory / lib / modules / / kernel / drivers / NET 6, configure the network and set IP addresses, can be set by the Network instruction method; If the network card is the second network card to be writable for Alias Eth1 E1000 If it is a SUSE SLES 9 configuration file is /etc/modprobe.conf or /etc/modprobe.conf.local 8, restart your computer, load the network card, if successful You can see the NIC Eth0 item during the system startup, you can pass the command after startup # Lsmod View If the network card is properly loaded, you can view the information via DMESG | GREP Intel.
