When we complete the webpage and apply to a homepage (whether it is free or payment), you can upload the web page. This is the release of the web page. Before uploading, you should do some preparations.
First, check the content and various settings of the web page
When we complete the web page production, an important issue is to manage the entire site, check the content of each page through these operations, to top the web page to the Internet to prepare on the Internet. In this section, we will primarily learn the contents of the webpage, including links, etc. For the convenience check, it is best to display the "View" column on the right side of the FrontPage window. If there is no "View" bar, click the "View" menu to select the View Bar command to display it.
1. Check the link between the webpage. When we build too many web pages, it is often difficult to determine if links between the pages have been established, and we can check with the "hyperlink" view in FrontPage.
First open the site, click the "Hyperlink" button on the View bar to get the hyperlink view of the site.
[Example] Check the hyperlink status of the local site "f: / myrice".
1) Open the FrontPage window to open the local site "f: / myrice".
2) Click the "Hyperlink" button on the View bar, the main window becomes a hyperlink view, as shown in the following figure. You can also click the "View" menu directly to select the "Hyper Link" command.
3) The structure of the hyperlink view From the above figure we can clearly see the link between the homepage and each page. The web page with " " is indicated on the icon indicates the next layer link. Click the " " to expand the next layer, then " " is "" "(see figure below). Click "-" to receive the expanded lower chain to receive the same, the same as the resource manager's folder window. 4) Check the link status to move the mouse to a web icon, the link between the page and the upper page is red, and the status and nature of the link are displayed. Normal links have "internal hyperlinks" (see above), "external hyperlink" and "MailTo Hyperlink". FrontPage can only automatically check the correctness of the internal hyperlink, and "external hyperlink" and "MailTo Hyperlink" only verifies the validity of the URL (ie, the character is legal), and do not correctly need to need a connection. And "MailTo Hyperlink" also requires email processing software (such as Outlook or Foxmail) and established an account (ie you can use it to send and receive emails). From the figure below, you can find that there is a problematic hyperlink connection line. This is often the link from the link file that is not in the site.
5) When the folder in the site is much more trouble, a check is more troublesome, you can use a hyperlink report to check all hyperlink error: Click the Report button, show the "Report" view shown below:
In the Reports view, you can see the information about the site, pay attention to the number of "unlink files" and "disconnected hyperlink". These are places that need to be corrected. Double-click the "Disconnected File" item, the "Disconnected File" shown in the figure below shows:
You can modify related pages, correct these errors, re-check the hyperlink, and ensure that all hyperlinks are correct. . When you add or delete a file via the resource manager or other tool in the case of opening the site, you need to recalculate the hyperlink to ensure the correctness of the hyperlink check. The specific steps are: Click the Tools menu, select the "Recalculation Hyperlink" command in the drop-down menu, and then click "Yes" in the "Recalculating Hyperlink" dialog box, wait for about half a minute, you can complete . After recalculation, the display in the "Folder List" will be normal. In order to enable customers to return to the home page or last level web page after browsing the next level, you should check if each page has a hyperlink that returns home or the last level web page. 2. Check the webpage in the browser. Although you can simulate the web page in the IE browser in the FrontPage preview window. But after all, the real browser is different, so check the actual look of the webpage in the browser is very important. In the process of making web pages, we have previewed the web page through "Preview" commands in the browser in the "File" menu. However, re-checking the web page does not omit in the browser, because we have repeatedly modified the web page when making the home page, so you must carefully check it before the page is uploaded. Second, uploading a web page When you have a homepage space, you can upload the production page to the server, that is, put it on the Internet, let friends around the world can browse it. Different space providers are different for uploading, almost all charging spaces and some free space allow customers to use FTP software upload files. But there are also many free spaces that do not provide FTP uploading, only allow users to upload files on the web page on the web page it provides. More free space provides the so-called web page production "Wizard" tool, only allows users to upload web content and do not allow uploading web files. 1. Using the web page to upload files Different free space servers to upload the web page. We introduce the "Multi-Mi Chinese Network" to upload the upload process: 1) Enter "Multi-米 中文 网"Free Space Web (http://diy.myrice.com/free.php ):2) Enter your username when you apply for space in the User bar of the page, in the" Member Login "column. "Bar Enter the password. Click "Login" to enter the upload page (see the figure below). If you have not applied, you can click "Register" application.
3) The content below this web advertising bar is the content in the server space (folder) you applied. If it is a new user, the folder is empty. The above figure shows that the situation has been transferred, and the green title bar pointed out "current position", everyone should pay attention. The green title bar There is two items of the yellow icon as a folder, click a folder to enter the folder. There are four small icons behind each file: Yes Copy button; it is the delete button; it is a rename button; it is the mobile button. The file (clip) can be copied, deleted, renamed, and moving four operations, respectively. Since it can only handle one file at a time, the work efficiency is low. In the list of files, there is "Building a new directory in the current directory" and "Uploading Files to Current Directory" (see the figure below), you can upload files and create a new folder (previously called "directory").
(1) Upload file: There are ten empty frames in this column, up to 10 files at a time. Click the "Browse" button behind each space, select the directory (folder) where the file is located in the "Select File" dialog (below), and then find the file you want to upload in the file window. Double-click it (or click "Open" after clicking), this file name and its path appear in the space (see above). After you want to upload the file (up to ten), click "Back to the Server" later, these files will be uploaded to the server. Uploading a batch of files or exit after the web page is uploaded at a lower network speed. (2) Establish a new folder to build a sub-folder in the current folder, you can enter a folder name in the "Upload File to Current Directory", and then click "Create". 2, upload files using FTP software
It can be seen that the efficiency of using the web page to upload files is very low (some websites can only upload a file once), if the space server allows the FTP software to upload files, the maintenance management website is much higher. Commonly used FTP software software, old urchins use Chinese FlashFXP, this software does not need to be installed, just double-click the flashfxp.exe file (or drag it to the desktop) in the resource manager, you can enter the FTP window:
This window is divided into four regions. Two pieces of the local computer and FTP server space are set, each of which can be set to a local browser or an FTP browser. Just click on the (switch to the FTP browser) or (switch to the local browser) button in the work window. In this case, the left is a local browser window (the current folder and its path are displayed below), and the right side is an FTP browser window. The lower right part of the work area is the connection status bar where the connection is monitored. 1) Connecting the site Click the Site item on the menu bar and click Site Manager in the drop-down menu (see the figure above). A Site Manager dialog box as shown below, click the " " number on the left of "Quick Connection" to expand:
Click the server you want to connect, click the "Connection" button (or double-click the server directly), which will enter the connection status, and display the connection process in the connection status bar under the FTP browser window. When the connection is successful, the server space is displayed on the crossbar under the FTP browser window, and the address bar above the FTP browser window displays the current directory (folder) in the space, just connected Time is the root directory. The FTP browser file window shows the files and subdirectories in the current directory:
2) Upload the file Click the drop-down button on the right side of the address bar on the local browser window to select the current directory of the local browser to the folder where the local website is located. In the local browser window, the file and subfolders in the folder are displayed. If the dual-click subfolder can enter the subfolder; double-click "superior directory" to return to the previous folder (directory). Select one or several files (or folders), press and hold the left mouse button to drag them to the FTP browser window, you can upload these files (clips) to the Internet server. If the folder is uploaded with all the files inside. During the transfer, the lower right window displays the transfer state, and the left window displays the file name of these files to upload. Similarly, in the FTP browser window, you can also enter the subfolder by a double-click subfolder; double-click "superior directory" to return to the previous folder (directory). At the time of uploading, you must pay attention to the folder on both sides must be the same, but the root directory of the server space can be exceeded. When you upload, if you have the same name file in the FTP folder, a dialog box will have you choose to override or "Skip" (ie, you don't get up and get the queue in the queue). Generally select "overlay" or "all overwritten" (with multiple files to overwrite). 3) Document Download Use the FTP software to download files in the FTP space to your local computer, download methods and upload: Select one or several files (or folders) in the FTP browser window, hold down the left mouse button Drag them to the local browser window. 4) Establishing the "Quick Connection" site If the first upload is first uploaded, you must first establish a site, that is, register the IP address or URL of the space you apply to the Site Manager. The specific steps are: (1) Click FlashFXP The "STP" menu of the window, click Quick Connection "in the drop-down menu, there will be a" quick connection "dialog box (bottom right): (2)" Server or URL "in the dialog The column fills the server address of the space provider you applied, fills the username (domain name) used when you registered in the User Name column, and enter the password correctly. (3) Click the "Connection" button, the FTP software saves the information you registered and the first connection. 3, uploading directly in FrontPage, if the space provider provides FTP upload function, and can be uploaded with the "Upload" feature of FrontPage. FrontPage The "Upload" function has a "fool" function, which can automatically complete the server space comparison with the local site, and automatically complete all uploads, no need to allow manual interference. This is relatively convenient for beginner users, but it is a little free to skilled users. And require no junk file in the local site, otherwise it will be uploaded in the junk file, even when you suddenly spend your space. Specific steps: 1) First open the site, click the File menu, select the "Publish Site" command, appear as shown in the "Publish Site" dialog box shown below:
2) Enter the server address that provides the home page in the "Specify Publishing Site" box of the dialog box, click the "Publish" button, enter the username and password in the dialog shown below, and then click OK. Button.
3) At this time, the prompt shown in the lower left picture is displayed. It is indicated that the end of the process is being uploaded, and the other transmits, the prompt disappears, and a "successful publishing site" dialog box, click the "Complete" button to end upload. 4) Sometimes the "Whether to overwrite this file" shown in the right now, you can continue uploading as long as you click the "All" buttons, and you will not appear again later. Third, after checking the online upload of the upload, apply the browser to open the website on the Internet to browse, try to open the hyperlink on the webpage, check if there is an error, if there is a problem, change immediately, and Upload update web pages. 1. Apply for a free space on the website introduced in this book, or apply for a free space on the school according to the teacher's request.
[Practice 1] 1. Open local sites in the FrontPage window, check if each link is normal, modify the link error. 2. Open the created web page in the browser, observe the background image, text font, and the font size of each page, pay attention to the aesthetic web page. Upload the final preparation for the web page. 3. Upload the produced web page to the server according to the requirements of the server space requested.
