Universal silica gel is generally used in laser engrave, plastic silica gel, IMD silica gel, assembled elastic conductive film and metal conductive film, key surface spray, can choose a variety of colors according to the US, according to special assembly needs, economical.
Laser engraving light transmissions, font light, improve product value;
Plastic silica gel plastics and silica gel can achieve soft feel and wear resistance; currently use this process (below);
The film is thin / short, the structure is fine, the assembly is simple, never worn, allows three-dimensional design and variation of diverse colors and patterns, which can be combined with polyester film (or metal) switches, cold light assembly to reduce assembly time and cost (under Map);
Thin film silica gel Special surface spray or plating process Premium metal sensitive injection molded key cap and silica gel assembly product (below).
Special treatment
Two-color injection molding, the cost of the plus-plated two-color mold is much higher than the ordinary (below).
Based on the method of P R, there are different effects using different treatments. When designing, it can be selected as needed: such as by sputtering, mirror oil printing or brushed, etc. (below).
The effect after sputtering, since the coating is thin, there is a UV, and the wear strength (below) is enhanced.
Spraying is a production process, spray paint belongs to spray. The sputtering plating is very thin, and plated is plated into water plating and vacuum plating (water plating is contaminated but the coating is not easy to worn, and the vacuum plating is largely adopted, but the plating layer is easily worn).
Reserved part of the rights Hillinsilence to retain part of the rights in this paper, the remaining part of the copyright and ownership is reserved by its owner.
