D version of the Rational Rose 2001 Fully Installation Manual

zhaozj2021-02-11  178

D version of Rational Rose 2001

Fully installation manual

I. Preparation before installation: 1. First confirm that you have installed Windows2000 (no matter which version is all) 2. Buy "Cool (16 in 1)" Number 43. Table of Contents: Rational Rose.v2001-Zenith 20014.Setupb is installing the installation file, and the CRACK is under the protocol file.

II. Installer: 1. Start the installer of Rational Rose 2001 2. Click "Next" 3. Select the last "Install Product Before licensing in the next picture", then click "Next" 4. "Next" 5. Agree agreement again "Next" 6. Select all content (Custom / Full) to click "Next" 7. Select Manager (Administrator) to click "Next" 8. Point "" Next "and then slow Slow system installation, final restart computer 9. The system will continue to complete the remaining installation

III. Installation Protocol Server: 1. Start Rational Rose 2001's installer 2. Point "Next" 3. Select the installation protocol server (Install License Server) again "Next" 4. Press the prompt to install the protocol server

IV. Installation protocol: 1. Open CRACK Into 2. Open Rational_Server_Perm.dat with Notepad and find the following text: server Any daemon Rational "pathto / ruler.exe" 3. Replace the replace it in the above text The name of your computer is like MyCom 4. Replace the pathto / rate.exe in the above text as the path name of Rational.exe in your computer, such as D: / Program Files / Rational / Common / Rational.exe "5. So just now The two lines should become as follows: Server mycom any daemon rulingal "d: / program files / ru" 6. Spend the modified Rational_Server_Perm.dat file to "Rational / Common" overwritten It turns out in Rational_Server_Perm.dat file in Rational / Common. 7. Find the FlexLm.cpl file in the CRACK sub-item to copy it below the system32 in Windows2000. 8. Open the Windows2000 control panel. Start FlexLm License Manager Manager 9. In Control The STATUS button appears if "License Server Up (Master) appears, then your Rose is already installed. The next thing is to let's take a look at Rose. If the license server up (master): please click the STOP button again to restart the protocol server may solve the problem (my first Rose problem is to solve the problem this 11. If you can't, then you get setup The tag is re-setup, then determine if you have modified the Rational_Server_Perm.dat file to match your machine configuration. Generally, the problem will be resolved.

转载请注明原文地址:https://www.9cbs.com/read-5041.html

New Post(0)