General steps can be installed step by step according to the documentation I provide. Here is only some of the points you need to pay attention to: 1. When installing the array, first divide the array disk into a zone. After the WINDOWS cluster is installed, this partition is divided into several A zone, or first divide the array into two districts, but only format a zone, and format another zone after installing the Windows cluster. Because IBM clusters only support one disk partition 2. When installing the SQLServer cluster, it is before It's timeless, but I'm reinstalling "Configuring the node on the cluster" (which is this), after a number of reinstalry results still still, then change the disk array of disk arrays from Chinese to English, problem Solved, then changed to Chinese or we can be installed! The problem is not very clear, but if you encounter such problems in the future, you can solve this method. 3. Other steps can be installed according to the corresponding document I provide.
Matching the cluster general step: 1. First make the array into RAID52. Then give a server Win2000ADVServer, install the installation domain controller, then load another server Win2000AdvServer, then add this machine to the newly built During the domain 3. After the establishment of a domain user, it is used to access the cluster4. Cluster service (here is a new node), pay attention to the selection of the sharing disk, load it, put on another machine The cluster service adds a previously created node 5. After the use of mutual conversion services to test if the cluster is installed. The method has two: one is in the operation, turn off a machine, see if the service is transferred to On the other machine, the other is to use the conversion function to see if it is not possible to convert the service control 6. After the installation, you can install the SQLServer cluster.
