Author: Chen Yiming Source: eNet FRANCISCO we all want a computer can boot into Windows instantly without waiting, but for various reasons are often unable to do so, even a boot crash situation also occurred. In fact, sometimes Windows start speed is not its own problem, but some equipment or software, see 8 reasons for the start of the system started below, and then check that your computer does not have similar problems! 1. USB hard disk and scanner and other devices If the computer has a scanner and other devices, or when the USB hard drive is connected, try to disconnect them, see if the start speed is changed. In general, since the USB interface speed is slow, the corresponding device will have a significant impact on the speed of the computer, and should be tried to connect to the USB device after startup. If there is no USB device, it is recommended to close the USB function directly in the BIOS settings. Morning Wind Tip: Since Windows is started, each drive (including the optical drive) is detected, so if the disc is placed in the optical drive, the startup time of the computer will also extend the computer. 2. An upset network card is not set properly, the NIC will also impact the system startup speed. If your computer does not use the network card, then unplug the network card directly to avoid affecting the system startup speed. If your computer is connected to the local area network, after the NIC driver is installed, the system will automatically pass the IP address by default, but most companies have no DHCP servers, so if the user is set to "automatically obtain IP addresses. ", The system will continue to search for the DHCP server in the network until you get an IP address or timeout, it naturally affects the startup time, so the local area network user is best to specify fixed IP addresses for their own computer. 3. The file and printer share some computers that have a WindowsXP professional version of the computer will also start very slow problems, even more than 1 minute 40 seconds! The system seems to be dead. After logging in to the system, the desktop does not appear, the computer is like stopping the reaction, and it can be used normally after 1 minute. This is because after using the bootvis.exe program, the MRXSMB.DLL file is started to add 67 seconds to the computer! To solve this problem, just stop shared folders and printers: Select "Start → Settings → Network and Dial-up Connections", right-click "Local Connection", select "Properties", cancel this connection in the open window "This connection uses the following The checkbox before the "Microsoft Network and Printer Sharing" under selected components can restart the computer. Tip: Microsoft has already pair of bootvis. The EXE file has been upgraded many times, and it does have a great help to Windows XP's startup speed. It is recommended to go to http://www.microsoft.com/whdc/hwdev/platform/performance/fastboot/default.mspx to download tool. 4. Unused network drives In order to eliminate or reduce the number of network connections that Windows must re-establish, it is recommended to break some network drives that don't need to be used, which is to enter "My Computer", right-click the network drive that has been mapped, select "Disconnect".
Cooperation unit: ENET College
