The network has brought convenience to the application, and it also brings a danger, so management and security have become very serious problems. The Windows operating system provides a wealth of features in this regard, and you have not found these useful features, let us show you one by one, there are always some suitable for you!
1, protect the password
Even if you believe your friend, you still have to cut your card when you play cards. The same reason, even if you are confident in your own memory, it is best to save a startup disk with a password, so that you have forgotten your password, you can also have a convenient solution. The specific operation step is, first, find a blank floppy disk that has been formatted, type "Control Panel / User Account" and Enter the "Control Panel / User Account" on the address bar of the IE window, in the "User Account "Select your account in the window. In the relevant task list, click" Block a forgotten password "and then complete the operation according to the prompt of the" Forgot Password Wizard ".
2, bypassing the forgotten password
If you are not ready to have a password, then log in with other management original levels, open the "User Account" setting interface according to the method in Article 16, select the account for forgot the password, click "Change Password" , Then reset the new password as prompted.
If you are unable to log in with another administrator level, you will restart your computer, and then press the "F8" button when the Windows start flag appears, and go to the Windows launch option interface. Use the up and down keys to "safe mode" and press Enter. When you see the welcome interface, select Administrator (this is a hidden account, and no password is required by default), the next operation and the same, the account password is reset, and finally restart the computer.
3, becoming a Power User
In the Windows 2000 Chinese version, it is called a user who is permissions. When you log in to the system with an administrator user, your system is easily attacked by malicious procedures such as Trojan Ma. When you log in to your system with a "Power User", you can avoid a lot of dangers, and you usually need to use the user as the user who manages the original level, of course, if necessary, switch back to the administrator level user More convenient.
Setting up the steps of the Power User as follows: Select "Start" / "Run", type "LusRMGR.MSC" command, enter the "Local User and Group" window, click "Group" on the left, then double-click on the right "Administrators". Here you need to confirm that there is another account in the "Member" list, that is, you can log in to the system with this account when you need full management of the original level. Select the account you want to downgrade, click "Delete" * "Confirm". Next, click "Power Users" * "Add" on the left, type your specified account name, and finally click "Confirm" 2 times.
4, when a temporary administrator
Power User can run administrator-level programs, such as the LusRmgr.msc program mentioned in the first article, without having to log out, re-login with the administrator level account. The specific operation is, in the resource manager, hold down the "Shift" key on the keyboard, then right-click the program or shortcut you want to run, select "Run Way" from the pop-up menu, then select " User Identity Running "(under Windows 2000) or" User User "(under Windows XP), then type the user identity name and password you want to use (if necessary, you need to type the domain name), Finally click "Confirm".
5, using Windows Network Installation Wizard
If you are the first time you connect to your computer network, Windows XP's Network Installation Wizard is a good choice, which can help you set a variety of details in step by step. If you want to manually run the wizard, you can select "Start" * "Run", then type "NetSetup" on the command line, enter the bus. 6, install wireless network
When you insert a wireless network adapter in your computer, XP automatically pops up a "connected to the wireless network" dialog. Right click on the wireless network icon in the system bar, then select "View Wireless Network You can use" in the pop-up menu, and select the wireless connection you specified, and finally click the "Connection" button. If you don't see this icon, type "Control Panel / Network Connection" in the Address Bank of the Explorer or Folder window, then right-click the icon for wireless network connection.
7, connect to a non-secure wireless network
If the "Connection" button in the "Connected to Wireless Network" dialog box mentioned in Article 6 is unable to use (gray), the network may be lacking "privacy protection relative to wired connection" or updated version "Wi-Fi protection safety connection". If you want to solve this problem, you can turn on "Allow INTWLE wireless network, even if there is a non-secure" project. However, it is important to note that your privacy protection may have problems this time.
8, do your own wireless network connection
By default, Windows XP automatically sets your wireless network connection parameters, which is called "wireless network zero setup feature" of XP. But if your wireless device is randomly attached to your own driver, you'd better turn it off with this feature of WINDOWS. The specific operation is to double-click the Wireless Network Connection icon in the Network Connection window (as shown in Article 6 Skills), or click the icon in the system bar. Select "Properties", then in the Wireless Network Connection Properties dialog box, click "Wireless Network", turn off "Use Windows to configure my wireless network", and finally click "OK".
9, fast switching account
If your computer is large enough, you can switch from an account to another, without having to cancel the first account first. The specific steps are as follows, click "Start" "Logout" * "Switch User". This feature is very useful when you need to use another account immediately, save time. But then you can do not like this feature, because using this feature may bring the lag of system run, especially when you run the game, system tool, or other programs that need to consume a lot of system resources, it is more obvious.
10. Turn off fast user switching function
The "Quick User Switch" feature mentioned earlier has another disadvantage that when you use this feature, you cannot use the Windows "Offline Files" feature, which automatically downloads the page to you offline. If you want to close the Quick User Switching feature, you can type the "Control Panel / User Account" in any "resource manager" or IE browser and then enter the car, then click "Change in" User Account "window. User login or logging out: "Use Fast User Switching" items to close, and then click "Apply Options".
11. Close the account instead of deleting an account
If an employee wants a long door, leave the company for a long time, you need to change your account settings for safety prevention, but you should do not delete the account directly. This is because the permission of the employee's account is not previously configured, and the employee cannot use a new account to access his own encrypted file. If you think that an account will be possible in the future, you'd better close the account instead of deleting the account, the specific operation is as follows (this feature cannot be used in Windows XP h OME): Press Windows-R Combination Type "LusRMGR.MSC" and press Enter. Click the "User" folder, then double-click the account you want to close, open the "Close the Account" project, and finally click "OK". If you want to re-open the account, you can turn off the item again. 12, keep files for deleted accounts
If you are very sure that an employee's account will not be used, you can completely remove the account and save his user file. The specific steps are: log in to the system with an administrator level account, type "Control Panel / User Account" in the address bar of "Explorer" or IE, and then carries back. Next, select the account name you want to delete, click "Remove Account", then click the "Reserved File" button, and finally click the "Delete Account" button. After these operations, although the employee's account has been completely deleted, his desktop settings and all files in My Documents are placed in a new folder on an administrator account desktop. It should be noted that the employee's email and other settings will never disappear after the account is deleted.
Yesky
