HP1010 can not be printed in successive repair
The office is a HP LaserJet 1010 laser printing, which is connected to the network shared printer on a computer of a Windows2003 LaserJet Server system. It has been printed. Now there is a strange fault: Whether it is printing from the network or from the local print, it can not be printed after printing, sometimes one can be printed, and the error prompt as shown. Restart the computer and turn off the printer power to reopen, maybe you can print a few, then you can't print again, sometimes it is not printed, all report the same error.
Started to do a problem with the printer driver, download the latest driver directly from the HP website, remove the original printer driver to reload, two no problems before printing, then print when printing, change the print signal line. Press the "Execution" button on the printer control panel to make a machine self-test printing multiple test pages, but there is no problem, and the printer's "Ready" indicator keeps flashing, this shows that the printer is receiving or processing data.
Is there a problem with the system of the computer? Connect the printer to another computer, the system can automatically detect this printer, after the printing program is installed, or the same print fault. The only suspicious is to have recently tested a few toner cartridges that rely on toner. Now it is also a toner cartridge with toner. Open the printer cover, take out the toner cartridge to discover a lot of carbon powder in the printer, remove it, then print, no matter whether it is local printing or network printing everything.
After the manufacturer's technical service personnel, it is said that toner is electrically conductive, which may cause a temporary short circuit failure of the printer in a certain component of the printer.
So we will add a powder to the toner cartridge, one to ensure that this toner cartridge does not leak powder, and second to clear the carbon powder of the printer machine, if the leak toner is too much, it is not only printed normally, but may even Will damage the printer motherboard.
