1. Creating a new file, 300x200 pixels, resolution of 72dpi, white background. 2. New layer 1, select the rounded rectangular tool, pull out a rounded rectangle in the center of the canvas! And convert this path to the selection. The gradient filling tool is selected, and the gradient filler such as (Fig. 1) is pulled out in the rectangular selection.
NO.13. Copy the layer 1 as a layer 1 copy. Return to the layer 1, move the rectangle in the layer 1 vertically down 5-6 pixels, and deepen its color to black with a curve or bright and dark command (Fig. 2).
NO.24. Replicate a copy of the layer 1 to the layer 1 2, return to the layer 1 copy, move it vertically upward, and use the curve command to deepen, deepen Deep gray (Figure 3).
NO.35. In the layer 1, a layer 2 is newly built, and the rounded rectangle tool is selected, and the upper half of the original rectangular position is pulled out of a slight narrow rectangle. After completing Ctrl T, at this time A transform box will appear on the path, then hold down the CTR Shift Alt to move any of the upper sides of the bottom of the shift frame (Fig. 4).
NO.46. After the above steps, the rectangular path of this deformation is converted into the selection, then select the gradient tool, set the colors of the deep light colors to white, and set the opacity of the light-colored end to 0. Drainage in this constituency to bottom (Figure 5).
NO.5
7. A copy of the layer 1, layer 1, and layer 1, 2, and layer 2, combined into a layer, and then perform a menu-filter-blurred-Gaussian blurred, blurred 1 pixel (Figure 6).
No. 68. Add a layer above the inclined layer, then select the rounded rectangular tool, pull out a rectangular path in the original rectangular intermediate position, and convert to the constituency, and use the original gray gradient to fill, after completion Double click on this layer, hook the slope and the relief option on the pop-up layer style panel, cancel the global light setting, set the size of the Softening to 0, the angle is -50 degrees, the height is 48, the other unchanged (Figure 7) .
No.79. Press and hold CTRL Click this layer, make it set up, then execute the menu - modify-shrink, shrink the selection 3 pixels, then press Ctrl U to reduce the image of the image in the image (Figure 8).
No.810. Do not uncheck, then execute menu - Select - Modify - Contrast, shrink 2 pixels, and create a layer above this layer, as described in step 6 described above, Set the simple colors and drag in the selection (Figure 9).
NO.911. Back to the original, layer, copy it into a copy, move 4-5 pixels under the layer below below, then return to the above layer, double-click this figure with the mouse The layer is selected in the layer panel, and the projection is selected, the projection is set to 10, the extension is 10, the size is 15, the other constant, then set the inner light emission color to white, block is 0, the size is 8 pixels, and set the contour line to the second row in the 5th pattern (Figure 10).
No.1012. Ok ~ The interface at this time has been completed! To do other modifications and beautification above, you can play (Figure 11).
NO.11
