How to implement personal configuration roaming in the domain: The company has a local area network, the server side is the Windows 2000 Server client is Windows 2000 Professional, and a computer sharing area is proposed, that is, no matter which computer can be used. Get all configured users such as desktop, my document, etc., such as desktop, my document, etc., all configurations under UserName%. Once a user enables roaming user profile, you can implement the above functions on some computers. But on some computers, all the required files are roaming (except C: / Documents and Settings /% UserName% / Local Settings / Application Data / Microsoft / Outlook Personal Data Clip * .pst * .pst ) is not. Previously, the server's policy editor was once, I don't know if it is related to this? A: For this issue, you need to solve the "Folder Heavy Direction" feature in the Group Policy in Windows 2000 Server. Suppose the Windows 2000 Server domain name is msft.com, the computer name is W2KSer, create a directory on the NTFS partition, such as public, and set the shared name as public, folder permissions, and shared permissions to complete control of the Everyone user group. Go to "Active Directory User and Computer", right-click the domain name msft.com, select "Properties" from the menu, click the Group Policy tab, select "Default Domain Policy", click Edit " Button, click User Configuration → Windows Settings → Folder Heavy Direction. At this time, you can see 4 options. First click on "Application Data", select "Properties" from the menu that appears, and selects the "Set" right side to "basically, re-direction everyone's folder to In the same location, "Target Folder Position" input //w2kser.msft.com/public/%USERNAME% /ApplicationData, where wk2ser is the computer name, MSFT.com is domain name,% username% is wildcard, ApplicationData is heavy Directed directory. Then click the "OK" button to return. Then redirect "desktop" to //w2kser.msft.com/public/%USERNAME% / DESKTOP, redirect "My Documents" to //w2kser.msft.com/public/%USERNAME% /MYDocuments, will Start Menu "Redirect to //w2kser.msft.com/public/%USERNAME%/StartMenu. You can also create an OU in MSFT.com, such as your unit name, move all users in the company to this newly built OU, then create and edit group policies in this new OU. Windows 98 machines cannot log recorders: LAN's machine has Windows 98, Windows 2000, Windows XP and other operating systems, and the domain is Ztyb.com. There is a Windows 98 computer that is automatically logged in every time, but not logged in to the domain, but log in to this machine. How can I solve this? A: Right click on the desktop to right-click "Online Neighbors", from Select "Properties" in the menu (or from the Control Panel ", double-click" Microsoft Network User ", select" Log in to Windows NT Domain "from the Properties dialog box appearing, "Windows NT Domain" Enter ZTYB.com and then click the "OK" button to return to the Network Properties dialog.
Select "Microsoft Network User" from the list below "Main Network Login", click the "OK" button, follow the prompts to restart Windows 98. When you join the domain, "Safe Operation Status" Q: I built a Windows 2000 domain server, but it sometimes prompt "Domain Run in Safety Status" when the client is added to the domain. What is the problem? A: When adding to the Windows 2000 domain, you should enter the NetBIOS name of the domain (such as your domain name is msft.com, you should enter MSFT), not the full name of the domain, this problem is mostly in Windows XP clients join the Windows 2000 domain, usually do not have this problem in the domain of Windows 2000 to join Windows 2000. When the network card is reported: I will always appear when I am turning it on: Intel undipxe-BUILD 082 Copyright C 1997-200 Intel Corporation for Realtek RTL8139 A / B / C ethernet controller v2.110012105 CLIENT MAC ADDR00 E0 4C B3 32 FC GUIDFFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF DHCP ..... PXE-E51NO DHCP OR proxyDHCP OFFERS WERE RECEIVED PXE-MOF Exiting PXE ROM. What is going on? A: This is your network card to enable the boot ROM chip boot function, and the NIC has caused by the PXE boot chip. It can be solved like this: Start the system. 2 If the NIC is not integrated, you can unplug the guidance chip on the NIC or use the NIC settings, and the Bootrom boot function of the network card can also shut down, and then after "Press Shift-F10 Configure ...", Press the "SHIFT F10" key button immediately, after entering the menu, set the boot ORDER ROM to Disable from Chapter 4, and then press the F4 key to save exit. Shared Internet Cannot Browse the web Q: After using the Windows XP system to make a proxy server, it is found that other computers in the LAN cannot browse the web, but there are data streams, but also software in the network, each machine in the network can also visit each other. The proxy server is a dual network card, set to "Other Computers in the Network" in the Network Configuration Wizard (through the A NIC CAPLAN), set to "shared to B connections in the network" in the shared property (ie 2, for the B network card). The client is set to "Internet access through other Computer", the operating system has Windows 98/2000 / XP, connected to the switch. The proxy server is connected to the switch to work normally (a, b network card and broadband MODEM connection), but the indicator on the client is only occasionally bright. When opening a web page, you can see "Open ***** web pages" in the status bar, but you can't see the webpage for a long time, and finally the "web page cannot be displayed" prompts. A: Maybe your network cable connection and DNS settings have problems: 1 Do a cascading line, connect A NICs directly to broadband ADSL, others do not move.
2 Set other client IP addresses to 192.168.0.2, 192.168.0.3, 192.168.0.4 ...... The subnet mask is set to 255.255.255.0, and the gateway address of each client is 192.168.0.1, setting DNS for you ISP's DNS address. At the same time, it is also possible to consider whether there is a conflict between the network card of the proxy server, exchange the PCI slot, remove the peripheral of the temporary unwanted, etc., is also a certain help for the problem. Reply
Reply: Always happy (posting time: five membership credit: 120 Points: 2199) 2005-1-22 9:30:48
The local area network is unable to ask: The server uses Windows 2000 Server and 16 terminals in the domain. The time of the server and part of the terminal (operating system for Windows 2000 Professional) is always different from 13 hours, but the server time is accurate. When you click the operating system in the online neighbor, the "The server's clock is inconsistent with the clock of the server" with the main domain controller "and can be connected when you click the terminal where the Windows 98 operating system is installed. How can I solve this? A: Please check if Windows 2000 Professional time zone settings are consistent with the Windows 2000 Server system. From the "Control Panel → Date / Time / Time" of Windows 2000, select the Time Zone tab, the time zone of the workstation can be the same as the server, the recommendation is "GMT 08 00 北京 北京,, Chongqing ..." . If this is not, run the net time command on the workstation to make a manual time synchronization. Who is logging in to my machine: I have encountered a problem recently. I always prompt "There are other users to log in to this computer". What is going on? What should I do? A: This is someone else's neighbor or other way Connect to your computer. 1. You can delete all shares on your computer. 2. Install a firewall software to prohibit the use of 139 ports. 3. If your system is Windows XP, you will have a Windows XP built-in firewall. I can't log in to the network after power failure. Q: The company's client (Windows 2000 Professional "Windows 2000 Server) When you want to see other client sharing files" Currently did not simulate the client's thread map operation analog tokens "Error. The problem is temporarily resolved after reinstalling the system, but the process is more slower when the client re-logs-in server is suddenly turned on, and there is no available when logging in. Login server to serve the login request "error. How can I solve this? A: You can resolve the following method: On the server, open" Service "from the Manage Tools, look at" Remote Procedure Callrpc " Whether the service has stopped, if stopped, right-click, select "Start" from the menu, then start this service (but to ensure that it is doing this to prevent the impact wave virus before doing this ). You also need to check other items in Service, see if there is "Start Type" is marked as "Auto", its "Status" Display If it is not "started", try launching them. Followed by CHKDSK C / f command to check and fix the disk. Then run the sfc / scannow command to check the system file. If there is a system file corruption, please follow the prompt to extract the intact system file overwritten the damage file. Introduction to the internal network website : Internal local area network often encounters networks to ping, online neighbors, when accessing the intranet website, how can I not open the web page. Is there a good way to solve this? A: Network can ping and The online neighbors are normal, and the network is good. The problem is on the computer where the web is stored. When the web page cannot be opened, please check if the web server is normal. If the server is Windows NT or Windows 2000, please Check if the Internet information server is working (or if it is started), check if the web share is problematic.
If not, just delete the Internet information service, restart the server, reinstall the Internet information service, recreate the web share (the directory of the web page) or recreate the website. return
Reply: Always happy (posting time: five membership credit: 120 Points: 2200) 2005-1-22 9:51:22
Unable to find a network path Q: Form a small LAN with two computers, the operating system is Windows 2003 Server and Windows 2000, respectively. After the connection is completed, although the Windows 2000 machine can be searched on the Windows 2000 computer, if you want to enter the computer, you can display the "Unrecognized Network Path" prompt to unable to share resource sharing. How should I solve? A: If you want to implement Windows 2003 resource sharing, you need to pay attention to the following: 1. Do not enable "Internet Connection Firewall" on Windows 2003, if you install other firewalls, do not use the default settings, otherwise, Resource sharing will not be achieved with other computers on the network. When visiting Windows 2003, the system prompts "Unable to find the network path", which is very likely to enable ICF. 2. You can search for Windows 2003 computers, indicating that there is no problem on the network. But when you visit, you can "I can't find the network path", or there is a problem with the resource sharing settings. Check if the "Local Connection" property is selected "Microsoft's File and Printer Sharing". If it is enabled, it is still unable to access, please check if the system is infectious virus. 3.Windows 2000 When you access the resources in Windows 2003, you must add the appropriate user in Windows 2003, and set the shared folder to grant the corresponding access. This is the case, the Windows 2003 is also the case. Typically, if only two machines are just two machines, use the system administrator account administrator, and set the password to the same, when entering Windows 2003 and Windows2000, use the administrator account to log in. 4. It is recommended that Windows 2000 and Windows 2003 use automatic access to the IP address, or use the IP address of the same IP address segment, and set the same subnet mask to avoid various connectivity failures due to IP address problems. Sending a big email causes OE to use Q: Use OE to send a netizen to a message, when sending to half, the system prompts an error and cannot be sent. Since then, OE cannot be used normally, always display "Unable to send mail", but there is no error code. After restarting, although it can be sent, it will not work after a while, even if the email, anti-virus, re-override is still the case. How should I solve? A: In order to avoid the abuse of the mail server, eliminate spam and email bombs, usually, each message allowed by the mail system is 2MB to 10MB. Therefore, when sending up to 200MB of mail directly, it will definitely have problems. When you encounter this situation, you can remove the mail from the shipping box directly from the outbox. If OE still does not work correctly, you can export an account, an address book, an email, and then open the Windows Explorer, and clear the contents in the / Microsoft / Outlook Express folder. Re-enter OE, then import the information. How to implement multiple ISP lines, asking: The campus network has two Internet connection lines, one is Netcom (CNC), one is a Cernet. It is proposed to use a server (operating system Windows 2003 and three network cards to achieve campus Internet connection sharing. That is to say, all three networks are connected to this server, so that the users of the LAN can be free to campus or telecommunications network.
Can you realize? If this method is difficult, what is the best solution? A: From the truth, this program is achievable. However, the soft route configured with ordinary servers is very troublesome, and it is very unstable. It is recommended to use the router to implement this function. To achieve this, the router must have an Ethernet port and two wide-area ports. Among them, the Ethernet port is connected to the campus network, and the two wide-area ports are connected to CNC and CERNET, respectively. The campus network uses the public IP address allocated by the CERNET. Set the policy rout on the router, add all IP addresses in all CERNET to the access list and set NAT conversions on the port connected to the CNC. When the campus network host accesses the host in the CERNET, it will be routed to the CERNET port; when accessing the host in the non-CERNET, it is routed to the CNC port, and Internet access is implemented via NAT conversion. IP address conflict Q: Recently, my computer often has the following case, prompting "The system detects the IP address xxx.xxx.xxx.xxx and network hardware address 0005 3b0c12b7 generated address conflict. This The network operation of the system may suddenly be interrupted ", then turn off the line for a minute and restore the network connection! What is the reason, how to solve it? A: This system prompt is a typical IP address conflict. That is, the IP address used by the computer is identical to the IP address of another computer in the same network, resulting in failure of communication. The MAC address of the network card that conflicts with the computer is "00 3b0c12b7". Typically, the IP address conflict is due to improper network administrators' IP address, or other users can set IP addresses. Since the NIC's MAC address has a uniqueness, you can request a network management to find a computer that conflicts with you and ordends it to modify the IP address. Use the "ipconfig / all" command to view your computer's IP address and MAC address. Finally, use the "ARP-S IP Address Network Physical Address" command to bind this legal IP address to your NIC MAC address. return
Reply: Always happy (posting: 5th member credit: 120 Points: 2201) 2005-1-22 9:52:01
There is no router to implement a shared Internet Q: I want to form a local area network, but there is a limited condition limit: there is only one broadband line, and each machine operating system is Windows 98 SE, all of which are configured with NIC. If there is no router, and the ADSL MODEM does not routing, only the hub can achieve 7 machine sharing Internet? Is it possible to set a proxy server with Windows 98 SE? A: There is no router or ADSL MODEM without routing function and only hub can also Implement Internet Connection Share. Windows 98 SE can also be set to proxy servers for Internet connection sharing. For local area networks with only 7 computers, you can use the "Internet Connection Sharing" of Windows 98 SE directly, and there is no need to install additional proxy software software. For example, the main unit is installed two network cards, one block is connected to the ADSL MODEM, and the other is connected to the office LAN. In addition, when setting up the Internet connection sharing, select the correct Internet connection, that is, you need to connect the broadband connection as an Internet connection, not a NIC connected to the ADSL MODEM. IE can not display the picture: When you browse the web, you can see the picture that you can see, becomes a small white square, there is a red "×". To display the picture, right click on red "×" and then select "Show pictures", which disappears will appear again. At the same time, the font of the web page has also become relatively large, and my page setting is 1024 × 768 pixels. The font is significantly greater than the default value of this setting. How can I solve (IE version 5.01)? A: It is recommended to use the SFC command to scan if there is a system file corruption. If there is, please extract a good file from the Windows installation CD. At the same time, the replacement IE6 SP1 can also solve this problem (this problem is relatively high in IE5 versions). After the ADSL dial, I can't go online. I use ADSL mode to access the Internet. I haven't access the ADSL MODEM dial. I have to wait for more than ten minutes. I have to call it again after I will go online. But "local Connection "shows that there is a packet collection. ADSL MODEM is changed to other machines to go online. Change the network card, format the system to reload Windows XP, or not. What is the reason? A: Network hardware (NIC, ADSL MODEM) should be no problem, remove the host hardware problem, may be because you have infected viruses, especially impact wave viruses (for a long time, there is a packet, you can't internet, It is because the data packet sent by the virus will take advantage of most of the bandwidth), and if the data partition is not formatted when formatted, it will definitely be dyed again. It is recommended to make a system patch to make comprehensive anti-virus, or use firewall software. There is a simple way to determine whether the machine hardware is or the fault of the operating system: uses a Windows98 boot disk format a system partition and installs Windows98, and then install ADSL dial-up software, other software is not installed. If the problem is solved, it is not a machine's hardware failure (because the impact wave virus does not work on the Windows 98 system), the rest is the work of anti-virus, reloading system and patch. return
Reply: Always happy (posting time: five membership credit: 120 Points: 2202) 2005-1-22 9:53:18
After adjusting the network card working mode, you cannot go online. Some user network cards are adaptive or 10Mbps half-duplex mode, solve some problems, but a user can not access the Internet in any way, the system is Windows XP), adjust only the data package sent after the working mode, no received data package I don't know what the reason is? A: Almost all switches and network cards support 10 / 100Mbps adaptive, that is, switch or network card will automatically select the maximum communication rate available according to the peer device, and serve 100Mbps full duplex, 100Mbps Half duplex, 10Mbps full duplex and 10Mbps half duplex. Therefore, in general, the switch to the NIC can automatically negotiate the transmission rate without modifying the configuration of the NIC. If there is only a data packet that is sent without the received packet, it means that the network is unlike, that is, the connection link of the computer is problematic. You need to check the LED indicator of the NIC and the switch corresponding port, or use the network cable test device to check the connectivity of the network cable to troubleshoot. If you don't have a problem with the network cable, you can try to change the port of a switch. Finally, you can try to replace the NIC or change the network card to a slot, which is very likely that the fault caused by hardware conflicts. Clear cookies can still log in to the website directly: Because the use is a public computer, for insurance, Cookies has been removed after use. However, after logging in to some websites (especially forums), even if all delete cookies are also unable to clear the login information, reopen the site or find already logged in. Only when the website click "Exit" to really clear the login information, how to better solve such a problem? A: You only clear the login information completely, you must restart Internet Explorer. At the same time, login information is not limited to cookies, and the user saved in IE, password information is also, which is needed. Upgrading the operating system to Windows 2000 / XP, create a user and set a password for each user, or thoroughly resolve such problems (each user has a different program setting). Unable to enable Net Meeting Remote Desktop Services Q: Netmeeting Remote Desktop Sharing in Windows 2000 is not open, you can access the machine on the far end, manage it? I can't enable the service on a machine, I will prompt one by opening. "Error 1053, service does not respond promptly or controls". The system is the Windows 2000 professional version, whether it can solve because of the version relationship (not a Server version)? A: 1. Enable "Remote Desktop Sharing", to let Netmeeting's other users to see your desktop. If "Accept Control" when "Remote Desktop Sharing" is enabled, NetMeeting can control your computer, but you will see the control results when control. 2.NetMeeting cannot be started when a single machine, which may be related to the network environment, the settings of the protocol, or if the system file is corrupted, please check with the SFC command. 3. On Windows 98, Windows 2000, NetMeeting can be used, whether it is a Professional version, or a Server version.
Realization of remote management between different operating systems: The system of local area network machines has Windows 98 and Windows 2000 Professional. In Windows 98, just enter the "remote management service" in the "Password" item in the control panel, enter the password on other machines. You can remotely access all resources, but open "Online Neighbors" in Windows 2000, there is no "manager" in the attribute, and you cannot access the Windows 2000 system in Windows 98. Non-shared resources, how to solve? A: "Remote Management Services" only in Windows 95 (after installing Windows 95 remote management services), Windows 98 can only be managed, and can only manage shared resources and cannot manage other content. Using Terminal Services in Windows 2000/2003 Server, using a remote desktop in Windows XP, you can fully manage your computer. If you want to implement remote management of Windows 2000 Professional between different systems, you can implement remote management software such as WinVNC, PCANywhere, etc. How to completely delete IPC $ sharing Q: In the information, see the problem of setting the settings of IPC $, modify the registry "HKEY_LOCAL_MCHIHE / SYSTEM / CURRONECONTROLSET / CONTROL / LAS" lower key value "restrictanonymous" is "00000001" or "00000002" Turn off IPC $. But use the NET Share command to view it, IPC $ sharing still exists, what is the reason? A: IPC $ sharing is set to manage the system, after the machine is turned off, it will be reconstructed when the machine is restarted next time. That is, IPC $ sharing cannot be completely closed, which is the need of the system. If you must completely close the IPC $ sharing, you can stop Server services in Administrative Tools → Services, but in this way, all shares in the system will not exist. return
Reply: Always happy (posting time: five membership credit: 120 Points: 2203) 2005-1-22 9:55:32
Why do not route to realize the shared Internet Q: In the "Experts Sitting 16", all clients and proxy servers use Windows 98 SE in "No Router Implementation Sharing Internet" issues. However, Windows 98 SE cannot realize the route between dual NICs, why can I achieve a shared Internet? Agent server requires several NIC? A: For the route ADSL connection, only the broadband router or proxy server can implement Internet connection sharing. When using a broadband router, ADSL can be connected to the WAN port, connect the hub to the LAN port, then set the broadband router. When adopting a proxy server, the proxy server typically needs to install two network cards, one of which is connected to the ADSL, and the other is connected to the LAN rack. Dual NIC is available when using Windows ICS (Internet Connection Sharing) to share the Internet. Although Windows 98 SE does not have routing functions, network address translation (NAT) can still be implemented with ICS to share Internet connections. In Windows 2000 / XP, Internet bridge can also be implemented in the bridge. Implement the mapping and management of the local area network folder: How to implement the map of the local area network folder, make the same folder on all other computers, no matter which computer is changed? How to do not need to encrypt the software Give folder encryption? How to give folder, ie fixed folder space size? A: You can map the shared resource into a network drive, so that all have authorized users accessed the shared file when network resources change When the clip is made, the modified file resource is obtained. For users who need to move with the database, if you want to simide the shared folder with the local hard disk data, you can use the Synchronization feature to make your laptop sharing when accessing or departing the LAN. Automatic synchronization of resources. In Windows 2000 Edition and Windows XP Professional Edition, when using NTFS file systems, you only need to mark the mouse on the file or folder to encrypt, and select "Properties" in the shortcut menu. Then click the "Advanced" button in the Properties dialog box, select "Encrypted Content to Protection Data" check box in the Advanced Properties dialog box, and click the "OK" button to make encryption processing. The encrypted file will only be displayed when the current user logs in correctly, thereby ensuring data security. It should be noted that the Windows XP Home version does not support encryption. In Windows 2000 / XP / 2003, when you use the NTFS file system, right-click the mouse on the screen quota, select Properties in the shortcut menu. Then, select the Quota tab in the Properties dialog box, select the Enable Quotes Management check box, and select "Limit the disk space to" option and specify quota space. If you want to specify a different quota for individual users, click the "Quota Item" button to make a detailed setting. Open the guest account and you cannot share the resource. Q: The computer is the Windows XP operating system. It used to open the guest account. Other computers in the LAN can access the shared folders. I don't know why, now there is a prompt without the right access when you click on the computer in "Online Neighbors". How to deal with? A: It is recommended to use the following steps: First, confirm that the current user (such as the username of the login and the previously different) settings are also enabled.
Second, confirm that the connection to the local area network does not enable "Internet Connection Firewall". Third, re-run the "Setting Home or Small Office Network" and re-add the computer to the network. Fourth, reset the shared folder. Fifth, check if the IP address information is correct. In addition to FTP, other network services cannot be used: Internal LAN via the ICS of Windows 2000 to the INTERNET. Recently, the Windows 98 workstation only ftp is normal, and the audio and video on demand and QQ are unable to use, and all Internet services under Windows 2000 failed. How should I solve? A: Internet connection sharing is independent of the client operating system. Since Windows 98 can use FTP services, there is no problem with the Internet connection. Therefore, the fault location should be limited to the ICS host and the client. It is recommended to use the following steps: First, check if the DNS settings of the ICS host is correct. When the DNS settings occur, only those Internet services that can be accessed through the IP address are normal. Second, the ICS host also provides a DHCP service, so the computers within the network should take the way to automatically acquire IP addresses, avoiding network failure due to IP address information typing errors. Third, since ICS is interested in Internet connection sharing, the client and all Internet applications do not need to do any settings, just connect directly to the Internet. Fourth, run the ipconfig command under Windows2000, check if the IP address is "192.168.0.x", if the IP address is "169.254.x.x", indicating that the network cannot be properly connected. The connection between the network should be checked. Fifth, check if the ICS host has a firewall installed and prevents other services other than FTP services. return
Reply: Always happy (posting time: five membership credit: 120 Points: 2204) 2005-1-22 9:58:18
The local network users visited the external network: 20 PCs and 5 laptops in the office are all configured. The server runs Windows 2000, enables DHCP, DNS, IIS, SQL2000 services, runs OA and web servers, install dual network cards. Because the company has no static IP address, use the ADSL Windows 2000 ICS sharing Internet connection. The LAN Access to the Internet is very slow, sometimes it needs to be refreshed several times to open the web. Ping LAN is normal, the local area network ping website sometimes returns Times and TTL values, but the web page can't be opened. How can I get the LAN fast? A: Try to solve the problem from the following aspects: First, if the network services such as DHCP and the SQL database services are all on the proxy server machine, the system burden will result in too large. The efficiency of the Internet connection sharing service is greatly reduced, resulting in sharp decline in Internet connection. It is recommended to close unnecessary services, or to configure high-aspigenous services to high system resources to other machines. Also please check if the machine has a worm. Second, Windows 2000 comes with Internet connection sharing efficiency is not very high, only adapt to small range, if the number of machines is more, it is recommended to use the NAT in Windows 2000 or use the ISA Server to make a proxy server, using Wingate The agent software effect such as Sygate is also good. This is a common problem that uses Windows 2000 Internet connection sharing. Third, try to test the Internet connection speed from the proxy server. If the connection speed on the proxy server is also very slow, contact the ISP, replace the ADSL link or ADSL MODEM. Fourth, check whether the terminal of the domain network is working properly and restarts the switch. USB dual-machine interconnection setting: Laptop (Windows XP system with single network card) and desktop (Windows 98 system with single network card, access broadcast broadband), using USB cable (USB2.0 with software )networking. The Windows XP system can see the shared file of Windows 98, it can't. LAN games can only be joined in the game created by Windows XP machines by Windows 98 machines. How should I set the sharing? The bridge settings of the USB cable can be used? Use the network cable (only one network card per machine) to get online at the same time? A: First, if Windows 98 shared the file and normal connection in Windows XP Machine games must be performed in Windows XP. The first is to enable guest anonymous accounts; the other is to run the "Setting Home or Small Office Network" wizard. Second, the bridge can be set in the desktop to facilitate information exchange. Among them, the USB cable connection can be considered a local network, while the NIC connection to the radio and television Cable Modem is treated as an Internet connection, and then, the Internet connection sharing can be implemented by means of bridge. Third, only one network card on each computer is unable to implement Internet connection, unless Cable Modem or ADSL Modem is a USB interface or built-in. Therefore, the second block of NIC should be installed on the desktop, where one is connected to the laptop and the other is connected to Cable Modem. Then, set the Internet connection sharing on the desktop. The firewall conflict causes the unable to ask: The LAN is shared by Windows XP ICS sharing Internet connection.
