As is well known, use WIN 9X / NT, most of the operating system is installed in C: disk, computer from C: boot startup, run Win 9x / NT and some applications on C: disc. However, when the Win 9X / NT system is wrong, after the system crashes, you cannot start normally, run the system, and even can't start the computer. WIN 9X / NT Installation Disc or a startup floppy can be used to boot the startup computer, but most cases, it can only be reinstalling the system, then reloading various applications. In addition, in the MS-DOS mode, the possibility of repairing an error, the possibility of the crash is also minimal, sometimes it is full of time-consuming and not please. Especially in case of viral damage, C: activity DOS partition is damaged, and the guidance information is lost, and you can connect the wishes of the reload system. At this time, if there is one not only booting the computer start, and you can run the Windows CD, how much better!
Windows running CD Overview Perhaps someone says "Windows runs on the hard disk, running Windows on the CD, is not possible!" It is impossible to become a reality. This method is to produce a disc running Windows. There are more and more users who have CD engrave recorders, as long as you can borrow a burner, don't go home, you can self-made this simulated hard disk Windows running CD, truly realize the dream of running Windows on the CD. It should be noted that this Windows running disc is most suitable for Windows 98/95 / NT3.51 ~ 4.0 operating system, due to the limitations of the installer, Windows 2000 / XP cannot run on the CD, while Windows Me is shielding The system restore function is removed and the 200MB backup file used to restore the system can also be used to make a running disc. We refer to this disc is called "Windows Run CD", which has the following special purposes: First, boot your computer as a normal disc boot disk. Second, when the guidance information of the hard disk cannot be activated, it can quickly start the system, activate the hard disk and restore the system without restricting the transmission area without restricting the third-party software repair boot area, and the "hard disk clone" in the past is used. The method does not do this, because Norton's Ghost first requires the hard disk's boot information to be intact, and can recover the recovery system in the MS-DOS environment. 3. When your operating system is upgraded from Win 9X / NT to Windows 2000 / Me / XP, or when modified other versions of Windows NT, you can use it to start your computer without any changes on the system on your hard drive, continue Run old version of Windows. Four, when you go out, it can start those operating systems, the application is completely different from your computer (of course, requires the hardware configuration to be the same as your computer), using your computer C: The system and software installed on the disk. , Work in your familiar environment.
Making the conditions required for running CDs to make Windows running CDs, which require the following soft, hardware conditions: 1. Nero - Burning ROM (hereinafter referred to as Nero) CD burning software. Second, Nero software supported discussion machine and blank CD-R / CD-RW disc. Most records of common ACER, HIGHTECH, HP, Iomega, JVC, Kodak, LG, Memorex, Mitsumi, Philips, Plextor, Ricoh, Samsung, Sony, Yamaha, etc. can be available. Third, the hard disk has more than two partitions, and C: disk partition should be less than 650MB to which the available partition magic (hereinafter referred to as PM) is temporarily adjusted. After installing the operating system and application software, the used space of C: should be less than 630MB (referred to after optimization, it is more temporarily adjusted by delete or moving when the value is greater than this value). It is best to be a double hard drive. Fourth, in the C: disk installed the Windows system and common application, tool software. The operating system, application, tool software is installed without any restrictions, but to install commonly used software in C: disk as much as possible, it is recommended to use few components, software, which is not installed or removed. Recommend a practical solution: Custom installation WIN 98 IE 5.5, Word Form Processing Software Word or WPS 2000, Database Assess, Image Processing Software Photoshop or Photostudio, Web Page Production Software FrontPage or Dreamweaver, Killing Virus Software Rising 2001 or KV3000, Compression Software Winzip 8.0, download software internet express or network ant, upload software CUTEFTP, view software ACDSEE 3.1 or Haojie big eyes, screen graphics software SNAGIT32 or HYPERSNAP-DX, clipboard enhancement tool CLIPMATE or COODCLIP, disk tool HD-COPY, CPU Cooling and Optimization Software Waterfall or CPU Cool, Hard Disk Cloning Tool Ghost 7.0, Remove File Recovery Tool REC4ALL 1.03 or Recover 3.5 and other gadgets you need. With this software combination, most users often have no problem, and this is installed without more than 630MB boundaries. System settings and adjustments are running Windows on the hard disk, and the reading disk writes do not have any restrictions, and the disc is only read and cannot be written, so before making Windows running the CD, it is necessary to make the necessary for the system and applications. Setting and adjustment, making it only to read without writing data, otherwise, if there is a case where you need to write, it may cause an error to cause the system and application on the Windows running CD to operate. .
Changing the virtual memory location Windows running requires a virtual memory space on the hard disk. Win 9X defaults from Windows Manage Virtual Memory to manage the data exchange space when the program is managed (file name Win386.SWP), where the system starts and program runs in the "C: Windows" folder, Write data, so its size will automatically adjust with the running program and dynamic data. Running Windows on the CD, you need to move the location of the virtual memory to other partitions, such as D: disk. The method is: 1. Right-click "My Computer" on the Windows desktop. 2. Click the Properties command of the shortcut order to open the System Properties dialog. 3. Click the Performance option tab. 4. Click the Virtual Memory button to open the Virtual Memory dialog. 5. Click to select "Users to make virtual memory" single options. 6. Click the triangle arrow behind the Hard Disk item, select "D:" from the drop-down list (see Figure). 7. Click the "OK" button to open the Confirm Virtual Memory Position dialog. 8. Click the "Yes" to return to the System Properties dialog. 9. Click the "Close" button to open the System Settings Change dialog. 10. The system prompts to restart your computer, click No, you will not restart your computer. Changing the location of the temporary folder Windows Temporary folder is "C: WindowsTemp", and many programs are written to temporary files, so the folder should be transferred. The method is: 1. Establish a "TEMP" folder in D: disk. 2. Run the Registry Editor Regedit, enter the registry editing interface. 3. Execute the Edit → Find ... command to open the Find dialog. 4. Enter "C: WindowsTemp" in the Find Target box and select the "Data" checkout and "match the entire string" copy option. 5. Click the "Find Next" button. 6. After finding the conditional primary key, right-click the key name, and perform the "Modify" command of the shortcut order, open the Edit String dialog, change "C: WindowsTemp" to "D: Temp", then Click the "OK" button. 7. Press the "F3" button to continue the search, repeat the last operation to modify until the entire registry is found, after the modification is complete, exit the registry editor.
Transferring to C: The folder written by the disk is required. It is necessary to specify that even if it does not make an optical disk, you must use the following methods to remove this type of data (all personal documents), so that in case, in case the system Crash, you must format the C: disk, you can guarantee that your data is not damaged. 1. "My Document" folder. Put the "My Documents" folder in the disc, "Cut" down, "Paste" to any location of other partitions, appear "Confirm File Transfer" dialog, ask you "Do you want to move system file Desktop.ini? "When you click" Yes "button to confirm, you can access your document in your new location, and" My Documents "on your desktop will automatically point to the new location of the folder. 2. Webc Cache folder. Right-click the "Internet Explorer" icon on the desktop, perform the "Properties" command in the shortcut order, open the Internet Properties dialog, and click Settings in the "INTERTER Temporary File" subcarby "in the General tab. .. "button, open the Settings dialog; click the" Move Folder ... "button to open the Browse Folder dialog; select C: a folder other than the disk in the disk and folder list; Click the "OK" to close the dialog box, and when the system prompts to restart your computer, the "No" is still clicked until the computer is not restarted. In this way, the downloaded web page and the web page downloaded when online browsing will be stored in this new location and do a long saver. 3. Email materials. After running Outlook Express, execute the Tools → Options ... command; Open the Maintenance tab of the Options dialog box; click the Storage Folder button to open the Storage Location dialog box; click the "Change" button Open the "Browse Folder" dialog; select a folder other than the C on the disk and folder list; click the "OK" button to open the "Storage Location" dialog box; then click "OK" After you are editing, you will be saved in this new location. 4. Personal Address Book. Open the "C: WindowsApplication DataMicrosoftAddress book" folder, cut it "* .wab" (* on behalf of your login user name, the same) file, paste it into a folder other than the C disc (eg "E: mail"). Run the registry editor, open the "HKEY_CURRENT_USERSERSOFTWAREMICROSOFTWABWAB4WAB FILE NAME" branch, change the "default" "C: WindowsApplication DataMicrosoftDress Book * .wab" to "E: mail * .wab". 5. Web collection and history folder. Like moving a "My Document" folder, "Favorites" and "History" in the "C: Windows" folder are moved directly to a folder other than the C disc. 6. Enter the method of personal words. Take the "Microsoft Pinyin input method" as an example, the P * L.UPT and P * L.IMD in the "C: Windows" directory are scrapped to a folder other than the C disc (such as "E : Myime "), then run the registry editor, open" HKEY_USERS.DEFAULTSOFTWARMICROSOFTWINDOWSCURRENTVERSIONPINTLGNT ", change the" User Define Phrase File "E: WindowsP * P.upt" to "E: myimep * p.upt", will "Learning file" data "E: WindowsP * Limd" is changed to "E: Myimep * L.IMD", you can make these personal vocabulary permanently.
For the program setting of the temporary file, the program settings written to the temporary file are set for programs that cannot change the temporary file save location in the registry. For example, if you want to run Word, execute the Tools → Options ... command, click the File Location option tab, select the "Document" → "Auto Recovery File" and click "Change ..." button to specify it to Other folders other than C. Another example in Winzip, execute the "Options → Configuration ..." command after running the program, click the Folder option tab, specify the position of "Work Folders" and "Temporary Folder" to other C drives. Folders, such as "D: Temp". Cancel some items in the "Start" menu
Running System Configuration Utility Config, click the Starts Options tab, cancel all programs that are not run from the C drive, so that it cannot be started with the system's startup. If "Super Sight" is installed in the E disk, you will close the Auto Play Detector in "Start". For programs that are run from the C drive, it is best to turn off not very necessary startup items, such as maintenance wizards, plan task tasks, and more.
If a program has been installed other partitions other than the C drive, you can do not have to make changes, but only modify the location of the shortcut to the program, such as if your UltraEd is installed in the "Uedit" folder of the E disk. If you right-click on the desktop and start the shortcut to the program, execute the "Properties" command of the shortcut order, click the Shortcuts option tab in the open dialog box, "target" "" : UEDITUEDIT32.EXE "Change to" K: UEDITUEDIT32.exe ", change" E: UED "in the" Start Position "column to" K: UED "(here" K: "is the drive letter specified for the optical drive. When the disc is built later, we will pinch the "E: UED" file on the disc to exist in "k: uedit"). Then specify the drive symbol of the optical drive, the method is as follows: 1. Open the System Properties dialog box Click the Device Manager option tab. 2. Click " " before "CD-ROM" to expand the optical drive device menu. 3. Double-click the CD-ROM icon and click the Settings option tab in the open dialog. 4. On the "Reserved Drive No.", click "K:" from the open drop-down list, select "K:" 5. Click the "OK" button to return to the System Properties dialog, last single Click the "Close" button to close the dialog. At this point, you can restart your computer to take effect.
After the C: disk is repaired, the computer is removed, and the C disk is deleted, if this is still more than 630MB, if such a C is more than 630MB, it is necessary to delete some components or programs, or use frequency. The lower program folder is temporarily moved to other logical discs, and then move back after Windows running the disc production. Disk scan for C, fix all errors, then perform disk defragmentation. Finally, it exited to the MS-DOS state, adjusting C size with PM software, even if the C-disk partition is not more than 630MB, it is also necessary to adjust, generally, adjust C: Size is adjusted to 10 to 15MB more appropriate than actual occupation. Scheduled CD 1. After starting NERO, if you appear Nero Wizard dialog box, click the Close Wizard button to turn off the CD production wizard and open the New CompiLation dialog. If the Nero Wizard dialog box appears, the "File → New ..." command opens the New CompiLation dialog. Second, the CD-ROT icon in the CD type column left on the New Compiration dialog. Third, click the Boot tab of the intermediate parameter setting bar in the dialog box, select the "Bootable Logical Drive" option in the "Source of Boot Image" column, and click on the triangle arrow behind it, select C: disk from the drop-down list. Note: The parameter setting bar has a user setting option "Enable Expert Settings", it is best not to select it. 4. Click the "File Options" tab, click the "ISO Level 2" option in the "File- / DirectoryNames Length" column. Click Select "Mode 2 / XA" option in the "Format" column. In the "Character Set" column, click the "Multibyte" option, click on the "Joliet" copy option on the right. Finally, select all the two check items in the "RELAX ISO RESTRICTION" column. This is not only to ensure the normal operation of the Windows running CD, but also to check all directory names and file names in DOS and Windows systems. 5. Click the "Volume Descriptor" option tab, enter the disc volume win 98 or win 95 in the input box behind the "Volume Label" item. Sixth, the above option is set, click the "New" button to close the Settings dialog and return to the main interface of the Nero. Will install program folders and files (such as e: uedit), you need to back up other personal files (such as E: my work), from disk folders and file windows, dragged from disk folders and file windows. In the CD folder and file window, the "File → Write CD ..." command is executed, open the WRITE CD dialog. In the "Action" column of the "BURN" selection card, select the "Write" item and then click the "Write" button to start burn the disc. It is recommended that you first select the "Simulation" item in the "BURN" selection card to simulate burn once before it is officially burned, and then officially burn the disc. After starting to burn the disc, you first burn a file named bootimage, and you have to experience a long time - this is not a file, but the guide of the entire CD. After the guidance area is completed, the program begins to burn each file of the disc file area one by one. Since the different burning machines are different, a few minutes to ten minutes later, a Windows running CD of the hard disk is made.
After the disc is well, according to your habits, the settings for the Windows system can be changed back to the original state, while some settings are not required, such as the system defaults in C: disc and frequently updated data. (All is personal), still keep them more than the set location, so you don't have to be annoying from C: disks backup from C: disks. The disc is used with this Windows running CD, you can start the system at any time, running Windows on the CD. For example, after the system crashes, use it to work in an emergency, and the system is upgraded to use it back to the past system environment for special homework. More to make it play, use it to manage, maintain important system files on your hard drive, and even repair damaged hard drives. Use it to start the system, do not need any parameters, do any option, you can easily enter the Windows system, just than starting from the hard disk, run a little slower. After using it to enter Windows, the C: disk disc is d: disk, other partitions are also pushed back, so we can use directly from C: disk to D: disk copy method to recover hard drives The system files; can use the restoration software to restore other important files on the hard disk; you can check the hard disk, kill the work; you can directly scan, organize your hard drive, repair errors; even if the hard disk is completely unable to boot the system, You can back up the useful file on the hard disk after starting Windows, then running on the CD, using the "local → disk → to disk" command item will be C: disk to D: disk, easy to restore the hard disk boot Information and the entire system, because the live DOS partition is lost, the drive information is unacceptable in the MS-DOS environment, but can access it in the Windows environment, while Ghost can guide information in the CD-Guided area. Orrant is copied to the hard disk.
