Canon S800 printer is a six-color photo printer, its printing speed and quality are very good, although the machine has already been discontinued, but in many digital photos and card companies are still in use. The printer uses a 6-series ink cartridge. The Sinopis ink supply system for S800 printers is plug-and-play, the following is the installation method of the system.
1. Open the printer on the cover, take out the six independent cartridges of the printer
2, raise the ink car pressure rod, remove the printhead
3. Remove the packaging ink cartridge from the box, this kit has been connected in cartridges, pipelines and accessories.
4, this is the six colors of Canon independent cartridges, pay attention to see the color of the pipeline (the order of color cover)
5. Insert the color cover with the pipeline into the external ink cartridge corresponding to the color, pay attention to the color order Do not insert the wrong
6, this is a good ink supply system that has been connected, pay attention not to low six Canoe ink cartridges
7. Six Canoelectronic cartridges are placed in the ink cartridge of the printhead according to the order of the corresponding color, and the ink cartridge is stable after being placed.
8, again check the corresponding color origin of the ink cartridge and pipeline, from the right to left color, yellow, magenta, green, light, light blue, black
9. Find the vent hole of each external SINOPIS ink cartridge (on the aluminum foil paper on the tail of the ink cartridge), using a pen pointed point to break the aluminum foil paper
10, put the printhead to the Canon ink cartridge to the printer ink, be careful not to hurt the printhead
11, then press the pressing rod of the printing car, pay attention to not press the pipeline
12. Check the installed system again to ensure that the pipeline is neat, no death, does not hinder the print stroke.
13. Displace the pipeline on the pipeline bracket, with a bracket card
14. The pipeline bracket is attached to the right side of the printer shell with the double-sided adhesive on the back of the pipeline bracket.
15. Insert the syringe needle into the ink cartridge (insertion from the intermediate rubber hole) to the ink cartridge air to introduce external ink into the Canon ink cartridge.
16, empty six ink cartridges, pay attention to the ink in the Canon ink cartridge can be used.
17. Use a plastic card or a paper card in a paper, press the printer's cover switch, turn on the printer power switch
18. Adjust the length of the pipeline within the print stroke, and remember: the outer ink cartridge must be placed with the printer in the same horizontal plane.
