There is a colored strip on the AP ink cartridge, which will be mentioned in the product manual, telling users that do not tear this seal to avoid ink leakage. It covers the injection hole of the ink cartridge, and the manufacturer is packaged in the ink cartridge by this injection hole. The torn strip can see the upper and lower small holes (as shown) clearly. I have to give ink cartridge, there are 2 problems 1) When the ink is usually, it is generally below the above, or the one.
2) How many ml is generally ink?
The injection in the first hole, generally ink 5 ml.
After the ink is completed, you can use it to clear the IC chip, the above hole is the manufacturer's injection hole, below the intake hole, in fact, both can ink, but in order to insure, it is good to use it. .
The injection in the first hole, generally ink 5 ml.
Note from the small hole, don't be too much each time, as for yourself grasp it, just a little bit
