final effect:
final effect
1. Use "Rounded Rectangle Tool" and "Pen Tool" to draw the prototype of the lighter. (A) Creating a new layer, the foreground color defined as "fuse" is defined as "E19842". Then the fuser of the lighter is drawn with the "Rounded Rectangular Tool". Figure A1. (b) Making the gear, the new layer is named "Ring." Select "Ellipse Box Tool", then hold down the Shift Alt Mouse left button, draw a round, the foreground color definition For "A2A7A7", fill it with Alt delete. Keep the selection, then use the "Select" - "Transform Orcan" to press and hold the SHIFT ALT mouse left mouse to wait for the zoom. Delete deletes the selection. A ring will come out. As shown in Figures 1, 2, 3.
figure 1
figure 2
Figure 3 New layer. Taken "saw teeth". Define the foreground as white. Use the "Single Rapid Selection Frame Tool" to click on the center point of the ring, Alt Delete populates. Figure 4. Ctrl D unsearched. Then press and hold the Ctrl mouse to click the "Ring" layer, and the circle is loaded into the selection, then select "Seagooth" layer, Ctrl Shift i select the white line outside the ring, then use Delete to delete. Continue to work on the "saw tooth", press and hold the Ctrl mouse to left "saw teeth" layer, select the remaining white line, copy one layer, use "Edit" - "Transform" - "Rotate 90 degrees" Avantime or clockwise can be possible). Then Ctrl E merges down. The layer is replicated, and the Ctrl T (Free Transform) is executed, and the conversion angle is defined as 45 degrees. Push it according to a secondary, each transform is half the last half. The final effect is obtained as shown in Figure 5. Then determine the center with a ruler (Ctrl R), with a circular selection to remove the excess part to the middle blank place with black filled. Figure 6. Such a prototype of such a gear is completed.
Figure 4
Figure 5
Figure 6
(c) Use the "Pen Tool" to select the shape of Figure 7. Then transform the path into the selection in the path panel. Figure 8. The foreground is defined as "F26522" fill. The final effect is shown in Figure 9.
Figure 7
Figure 8
Figure 9
(d) There is no difficulty in drawing the remaining part. Everyone can draw according to the pattern given by the author. Ok, we put these parts to be assembled. For the convenience of the next narrative, we add a serial number for each part. The serial number will be used instead of the name of the part. Figure A2.
Figure A2
2. Add metal gloss to "Part 1". First, the "graded tool" is edited. The gradient effect is shown in Figure 2-A1. Then press and hold the CTRL mouse to the left button, set "Part 1" to the current selection, drag and drop from left to right with the "gradation tool", as shown in Figure 2-A2. But get a metal texture but is not very strong. Use "Image" - "Adjust" - "Curve" (Shortcut: Ctrl M) to adjust it. The setting of the curve is shown in Figure 2-A3. The rough effect after adjustment has come out. Here, it should be added to it with a high light. In order to better observe the image to 600%, then use "light tool". "Mode" is set to high light, the brush size is defined as 13, and the stretch is 100. Apply a partial edge of "Part 3". At this time, the mouse must be very stable, quickly drag from left to right. No one can succeed one or two, try more to try, have been satisfied with the effect. The final effect is shown in Figure 2-A4.
Figure 2-A1
Figure 2-A2
Figure 2-A13
Figure 2-A143. Increaseing the "Part 2" to operate the "component 2", saying that it is difficult to say, it is easy to say, the key is to see how you are patient. Or use "light tool", mode is set to "high light", the brush size is defined as 35, and the stretch is 50. Apply a smeared on the left side of "Part 2", pay attention to uniform. The effect is shown in Figure 3-A1. Continue to use the "light tool", "mode" is set to high light, the brush size is constant, the stretch is 16. Apply the middle part of "Part 2" to apply it. The effect is shown in Figure 3-A2. Next, "Deepen Tool" "mode" is set to high light, the size of the brush is constantly changed as needed, and the stretch is 50. Apply the right side of "Part 2" to the right side, and it is not repeated here. After general, it is necessary to use "deepen, light tool", which is image color, excessive nature. The final effect is shown in Figure 3-A3. Figure 3-A1
Figure 3-A2
Figure 3-A34. Production of "Part 3" production highlight and transparency (a) selected "Part 3", set the transparency of 49%, hidden the background layer, can clearly see, " Part 3 "has had a transparent effect. Then use the "deepening tool" to apply the edge of "Part 3". The mode is set to "middle tuning", the brush size is set to 65, and the stretch is 50. The effect is shown in Figure 4-A1. The completion of the production will find that this looks thinner, in order to increase its thickness, "Part 3" copy 2 layers overlap together, huh, huh. I feel it ~~ The effect is as shown in Figure 4-A2.
Figure 4-A1
Figure 4-A2
(b) Next, highlights, create a new layer, name "Highlight 1", select "Single lineless box tool", the foreground is defined as white. Click the left mouse button, Alt Delete populates, Ctrl D unchecked. Ctrl Mouse Left mock "Part 3" The layer is located, defined "Part 3" as the current selection, Ctrl Shift I reverse selection. DELETE, removes the excess part of "Highlight 1". In order to make the light sensation, "Filter" - "Fuzzy" - "Gauss", the magnification size is 1.0. After copying, a layer is copied and the size is changed. As shown in Figure 4-B1.
Figure 4-B15. Increase the metal gloss (a) to "component 5" to increase the metal gloss, first select the layer of "part 5". Then perform "Layers" - "Layer Style" - "Leaning and Embossed". The specific parameter setting is shown in Figure 5-A1 ,.
Figure 5-A1
(b) Increase the layer of metal gloss, select "Part 5" in "Part 6". Execute "Layers" - "Layer Style" - "Leaning and Really Sorthling". The specific parameter setting is shown in Figure 6-A1. The parameter setting of "Part 7" is consistent with "Part 6". No longer repetition.
Figure 6-A1
The completion effect is as shown in Figure F1.
Figure F1 6. Increase the layer of the metal light in "Part 8" to increase the layer of "Part 8" to 700%. Use "deepen, light tool", and the mode is "high light", brush The size is used alternately between 1-3. The exponential is set to 100. The method has been taken before, as long as it is patient enough to repeat multiple times, there will be an ideal effect. The author is as shown in Figure F2.
Figure F27. Surface work is "Part 4" to increase the three-dimensional sensation. First, "Part 4" is selected, and the path of Figure 7-A1 is checked out with the "Pen Tool" in the toolbox. The path is then converted into a selection, and the "Highlight" mode is used to "high light", the brush is used according to the situation, the stretch is 75. Deepen the semicandem sections. As shown in Fig. 7-A2. On the layer of "component 4", the selection, Ctrl Shift I will be selected, followed by proper application of the remaining parts using the "Light Tool". The effect is obtained as shown in Figure 7-A3. Finally, CTRL D cancels the selection. "Part 4" is completed. "Part 9" production method is roughly consistent with the "part 4", because the space is limited, it will not be in the line. Figure 7-A1
Figure 7-A2
Figure 7-A3
Such a lighter's surface results are completed. The effect is shown in Figure F3.
Figure F38. The parts and gases in the maker are not very clear because they are separated by a layer, so that everyone should pay attention to this. Don't forget to reduce transparency when making it. This will have a certain feeling. (A) Caill the core of the transfer of gas. The new layer is named "Rectangular Selection Frame Tool" in the toolbox, which is known as "Rectangular Selection Frame Tool" in the toolbox, and the foreground is defined as white. Alt delete fills. Ctrl D unsearched. Figure 8-A1. Then use "Layers" - "Layer Style" - "Luminous". Each parameter setting is shown in Figure 8-A2. Then create a white layer below the layer "core", (Fig. 8-A3) and then perform Ctrl E to merge down. (Since the "core" layer is required later, the layer with layer styles cannot achieve the effect, so this step is needed.) Good, after merge, continue to use "Rectangular box" Tool "Remove the upper and lower black parts of the" core ". Figure 8-A4. The transparency is then reduced to 39%.
Figure 8-A1
Figure 8-A2
Figure 8-A3
Figure 8-A4 (b) The new layer is named "metal ring". Draw a rectangular selection using the Rectangle Machine Tool. Figure 8-b1. Then edit the "Gradient Editor". The gradient setting is shown in Figure 8-B2. After adjusting the gradient effect, "Gradient Tool" in the toolbox is cheered from left to right on the rectangular selection. The Ctrl D will then unregister. Reduce transparency to 55%. The effect is shown in Figure 8-B3. The other parts of the other parts are the same, and the gradient is also the same. Patient-friendly friends can also try other gradient effects. The final effect is shown in Figure F4.
Figure 8-B1
Figure 8-B2
Figure 8-B3
Figure F4 (c) makes a separator. The new layer is named "Sex". Since the "separator" will eventually be blocked by the font, it doesn't need to be careful, as long as it is a little fettered. First define the foreground color as "FC9C1D", and then use the "Rounded Rectangular Tool" in the toolbox to draw a rounded rectangle. Then remove the part of the body. And move to a suitable location. Figure 8-C1.
Figure 8-C1
The image is then placed with the "light tool" mode "high light", the brush size is 5, and the stretch is 100. Apply "separator" to the effect of Fig. 8-C2.
Fig. 8-C2 (d) This is a lighter plus gas, and the new layer is named "gas". Use the "Pen Tool" on the toolbox to draw the path. Figure 8-D1. The foreground is defined as "737373". Then "use the foreground color stroke path". Ctrl Mouse Left button Click "The layer of the body is located in the direction." The -delete will be exceeded by the deletion of the fuselage. After the transparency is reduced to 51%, the "rubber tool" on the toolbox is used to use the feather The big brush is partially erased. The effect is as well as the gaseous gaseous in the lighter is present in liquid state, and through the liquid state, it will have a refraction, so we have to "core" "Subsequent processing. Select the" core "where the image is located, enlarge the image, use the" Pen Tool "to hook the path as shown in Figure 8-D3. The path is converted into a selection, delete, and the image within the selection is deleted. Use the "Rectangular Selection Frame Tool" to select the lower half of the "core", then use the "Move Tool" on the toolbox to move 1px left. As shown in Figure F5. Figure 8-D1
Figure 8-D2
Figure 8-D3
Figure F5 (e) is good, and hard work has been done. The rest is to add some texts and some small handling, which is not introduced here. Here, a beautiful lighter is completed. The final effect is shown in Figure F6.
Figure F6
