Author: Ding Renkui
Remote real-time monitoring system DIY
Here you need to talk about three technical and implementation methods:
1, hardware configuration and installation.
2. Application settings for the ADSL Internet Dynamic Domain Name.
3, the production of remote monitoring web pages.
Let's explain one by step:
First, hardware configuration:
At present, there are two soft compressed [because the hard-compressed card ratio hard compressed card is cheaper, so this is only the implementation of the soft compression card] card, the two uses the same chip, but it is Different boards, use different software, one is the four-way card Xenon P1004
-16A
Monitor card, each card four-channel video input (including audio), total resource 25 frames / single system support four board cards, 16-channel display video / resolution 768 × 576PAL, 640 × 480NTSC / through the LAN / WAN to front-end PTT The lens multi-level control, the software is PICO2000, the other is the eight-way card, due to the eight-way card requirements [must be ATI's graphics card, and can only use Windows 98] and computer configuration. So here does not introduce 8 cards, although its number of frames per second can be 100, and the four-way card is up to 25.
However, the software used by Eight-write card is still nice, functionally compare specification, and can operate each camera. But insufficient is that the remote client must install software in Win98 to watch remote information.
The four-way card is relatively low in computer configuration, and is compatible with various Windows operating systems. With the 810 motherboard, the plate with graphics cards can be used. Of course, the bigger the hard drive, the more the stored video materials, the better the graphics card, the more it will, which is certain. In addition, the resolution of the operating system must be adjusted to 1024 * 768, 32-bit true color, otherwise the image is not coming.
The list is as follows:
One multimedia computer, one four-way card (multiple photos can be used as needed), monitor the camera (as needed, one card can pick up four cameras).
Installation Method: Install the four-way card in the PCI slot of the computer motherboard, and connect the camera. After booting, put the disc that is brought to the card in the optical drive, runs setup.exe under the PICO2000, click Next, select PAL or NTS according to the type of the camera you bought when selecting the installation type. Generally, most of the PAL, the four-way card needs to choose PAL 108. After the choice, you can do it next step. At this time, the driver of the hardware found after the four-way card is installed is OK. After restarting the computer, run the desktop icon: PICO2000 then log in, the username default is: Super, the password is not entered. It is ok directly. Then click on the four square icon in the upper right corner, you can see the monitoring image. There are some other settings about the recording here, and it will not be argued.
Second, dynamic domain name application and configuration.
Www.dns0755.net Apply for a user, and apply for a second-level domain name (XXX.DNS0755.NET), which is free for the second-level domain name analysis of public IP. If you are an ADSL dial-up, you can use it. Download a WinPIP client back. Run it, then set it, in the help, the setting is relatively simple, as long as the password is filled with the password and the domain name that needs to be parsed. And you can set the automatic dial function, set the ADSL's connection, and the username, and password, which will be automatically redirected after the disconnection. It is best to turn this WinPip through the planned task to turn it automatically. So your computer is bare to the public network. At this time, a client program on the desktop can use VCNT1.exe to remotely monitor. Enter the dynamic domain name just applied for you in Server. You can connect to the monitoring. This is not the best way. The following describes how to monitor it with a web page.
Third, monitor the production of the webpage:
There is a code in the sample web page of the disc:
This is a reference to the client an object, make a web page, as long as Test.dns0755.net is changed to your own domain name.
There are two things (decoders, image components) customers must be installed when they are remotely visited, and can add links to these two files on the web, [INS_MSMP42.EXE decoder] [INS_VCNT3.EXE image Parts] These two files can be found on the disc. When the user is linked to the webpage, you can click to open it. There is no need to pay attention to the future. Upload the web page to online space so that users can see his monitoring through this page anywhere. . .
If you have any questions, welcome to exchange QQ: 5014882
