Third, GSM mobile phone secret
(1) Motorola
Motorola all lock: Press MENU 5 1/2
T190 unlocking password: 20010903
T191 unlocking password: 19980722
3x8 / 2x88 / 998/8088/2000/7689/8089 / C289, etc. initial password is 1234; phone password is 000000; unlocking method: If there is no test card, first enter 1234, such as password has changed, press the MENU button first The "Modify Unlock Password" appears, press the OK button, and then the 000000 will display the four-digit phone password. If the confidential code has changed, it can only be used to solve the test card or software tool.
T2688 / 2988 Universal unlock code: 19980722
C300 relief lock: 20020801
Motorola phone appears "phone bad, please repair": can be used to use the test card, enter 0205 #, 0205068 # can be repaired, no need to rewrite the chip.
T2688 / 2988 / 988D set Chinese: * # 0000 # OK (card)
V60 / v66 / v70 unlock: insert the test card, enter the MENU 048263 * after booting, press 18 * 1 to clear, input 18 * 0 is the main reset.
V998 Foreign Reform Chinese: Menu- Left Direction Key Press 3 - OK - Left Direction Buttons Press 5 - OK-SIMPLIFIED-CHINESE
Motorola 2688 time does not take a secret: Push the power 1 feet and 8 feet with the painting wire, killing!
(2) Nokia
Initial security code: 12345
5110 latch code machine decoding: In the case where the confidential code is locked, enter the correct guarantee password is invalid, can be 1, press the C button does not place, 2, press the * button does not place, 3, press the * button, 4, input 04 * Pin * Pin * Pin # Remove the lock code.
3210 Solution SP Lock: 1. Press the C button 2, press the down button 3, press the C button until the screen clear 4, press the * button until it flashes 5, then press the * button until it flashes, input 04 * PIN code * PIN code * PIN
N7650 Restore factory settings: * # 7370 #
Nokia mobile phone 30% electricity code: * # 746025625 #
Nokia mobile phone isolated factory: * # 0000 #
Nokia can play into the incoming call: If there is a "2" word in the upper left corner of the display, hold down the # key for two seconds, press Enter the confirmation; if "2" is not displayed, press "Function button" 6 1 4 2 is confirmed again.
Show mobile phone information password: Enter * # 92702689 #
Query if the phone is locked: "# PW 1234567890 1 #" query is the lock country code; "#PW 1234567890 2 #" query is the lock network code; "#PW 1234567890 3 #" querying whether the lock network provides Commercial lock code; "#PW 1234567890 4 #" query is a lock SIM card. (Continuously pressing the * 二 二二 即 ; continuously pressing the * button three times, then P; continuously pressing the * button four times, W)
Nokia 3210 Foreign Document Reform Chinese: The upper right corner of the screen is adjusted to 4-2-1-9
Nokia 5110 Foreign Document Reform Chinese: The upper right corner of the screen is adjusted to 4-2-1-8
Nokia 3310 Foreign Document Reform Chinese: The upper right corner of the screen is adjusted to 6-2-1-3
(3) Samsung
Solution lock: * 2767 * 2878 # / * 2767 * 7377 #
Chip reset: * 2767 * 3855 # can also be used to unlock the lock or card lock contrast: * # 0523 #
See Software Version: * # 9999 #
Samsung 6 million password: 9998
Samsung 600 SMD Reset Directive: Old Edition * 2767 * 2878 # or * 2767 * 3855 #; new version of * 2767 * 7377 #. (Enter) without card status)
Samsung A100-A188 View Version: * # 0837 #
WAP Reset 2767 * 927 # can solve the failure of "please wait" in some models
X199 mobile phone lock: Device input * 759 # 813580, input 73, after the appearance point, enter 02 start. The data inside will be emptied
N299, A399, A539, A599 manual unlock: Enter * 759 # 813580 # Enter factory mode, press 29, two or three minutes lock automatically
A188 / A388 Solution SIM lock: No card input * # 9998 * 627837793 # Display error message; enter * # 9998 * 737 #; press the up key to find the PCK code, there is a 9-digit number, remove the first place Less mark; shut down to the card, type the number of 8 digits after booting, you can unlock it.
Samsung A408 solution SIM lock: no card input * # 0737 #, then find the PCK code up and down, remove the first bit is the SIM card lock code.
Samsung 2400 unlocked: Plug, no card, no card, then load the card, lose * 2767 * 2878 #, then press the boot button until the "Please wait" to release the button; then go to the confidential menu The password is turned off.
Samsung A800 unlocking instruction: mobile phone unlocking password is: * 2767 * 2878 #; No card input * 2767 * 637 # mobile phone automatic shutdown, can solve the network lock.
Samsung S308 / A408 phone initial password and change phone pass code: 00000000
Samsung N628 / S308 / S508 / V200 / V208 / T108 / T408 unlocking instructions: * 2767 * 2878 # Truncat current setting reset (mobile phone unlock); * 2767 * 3855 # phone EEPROM total reset (repair software failure); * 2767 * 7377 # Solve the reset command of the mobile phone password.
Samsung A188 / A388 / A408 / T208 / S108 / S308 engineering model prefix is * # 9998 * ... #; Samsung A288 / N288 / N628 / T108 / T408 / T508 engineering mode prefix is * # 8999 * ...... #.
Samsung S508 Restore the factory setting instruction: # * 7728 #
Samsung A300 / A800 unlocking instruction: * 2767 * 637 # (income)
Samsung S105 solution SIM lock instructions: * 2767 * 7822573738 # Slim lock instruction: # 0111 * 00000000 # (income)
Samsung S100 / S300 / V200 unlocking instructions: * 2767 * 7822573738 # (income)
(4) Siemens
Mobile phone unlock: dial 02138984777, then press 1,1,0 in the prompt sound. Tell the other party to unlock the phone serial number and one ID number (casually say), then write down the unlock password provided by the other party, and enter the phone to unlock it. This method is now no longer used, unlocking the information on the following website - http: //www.cnii.com.cn/20021218/CA129889.HTM
Www.estar.com.cn/tip/showart...p?articleid=568
Siemens 2588 foreign transformation Chinese: * # 0085 # Restore the factory settings: * # 9999 # Siemens 3508 外 文改 meaning in Chinese: * # 0086 # OK
Siemens solution network lock: no card input * # 0000 * 74286253 #
Siemens Check Software Version: Enter * # 06 #, press the upper left button
(5) Philips
Philips Diga and Genie unlock: Enter * # 7489 * # can see password,
Philips Fizz unlocked: Enter * # 1234 * # can view password
828 test instruction: input * # 7489 * # can display and change your phone's secure code
630 unlocking instructions: # 20021208
Philips section mobile phone outside the mobile phone to change Chinese: Long press 0 button, selection.
(6) Sony, Ericsson
Ericsson mobile phone shows the factory dates: right, *, left, left, *, left, *
Ericsson mobile phone display version instruction: → * ← ← * ← *
Sony mobile phone display software version and production date: # 8377466 #
Sony mobile phone recovery factory settings: * # 78737322867973738 # (* # superfactoryReSet #) *
SONY mobile phone security code reset: * # 73287489263373738 # (* # securitycodeRest #): Password reset is 0000
Sony Z28 Show hidden game: Put the left side to the outer wrench can display four games; 21 points winning trick: Pumping the electric board to keep the original, win can with the C key to exit save. The highest can win 10,999999 points.
Ericsson T28 Unlock: Enter ** 03 * 0755 * 3246 * 775 # Screen Display Mach Err Press the left direction button or the right arrow button to enter the menu to unlock.
(7) Alcate
Alcatell mobile phone search software version: * # 06 #
Alcatel mobile phone enters engineering mode: in standby now 000000 *
Alcatell mobile phone recovery factory setting: ### 847 #
Alcate BE1, BE3 (OT220 / 221) Unlock: 25228352 / Alcatel D
Alcatera BE4, BE5 (OT301 / 302) Unlock: 83227423
Alcate HD1, HE1 (OT500 / 700) Unlock: 25228352
Alcatel OT735 unlocking instructions: 83227423 (increase)
(8) Panasonic
Panasonic When searching in the network, enter * # 9999 # will appear English information. First line: 669EGAD80A02-02, the software version of the machine is A02, and 80 means that the phone model is GD80; the second line: Displayed is the version of the "language package" program in this version of the software; third line: Show It is the time for this version of the software design.
Panasonic G600 unlock: When dialing 112, press the red button to stop, and enter the * # 06 # immediately when the end call is displayed, and the IMEIM code is displayed, then press C.
Panasonic GD55 hidden menu: * # 369 #
(9) Mitsubishi
NET LOCK: * 787090 or * 787292
IMSI LOCK: * 362628 or * 360608
Netsub Lock: * 476989
CP LOCK: * 482896 or * 480896
SP LOCK: * 967678
EXT LOCK: * 574243
Mitsubishi M330 unlocking instructions: * 5806 (increase)
(10) NEC
Restore the original setting: * # 73738 # or * 73738 # OK View Software Version: * # 2820 #
SP lock: * # 3210 # transmit button
Company lock: * # 8140 # transmit button
SIM lock: * # 4960 # transmit button
NET LOCK: * # 7320 # Transmit button
Network lock: # 7320 * (eight password) # transmit button
DB2000, 2100 Unlock code: General 82764016, press MENU # to display the mobile phone number,
Solution NEC988, NEC988D all locks: 19980722
NEC N8 unlocking instruction: input * # 8140 # Press the transmit button again (increase)
(11) LG mobile phone
Part of the generic password for some models: 1477
LG 200: * 7 8 9 # Send
LG 500: 2 9 4 5 # * (HOLD)
LG 600: 2 9 4 5 # * (HOLD)
LG - 510: 2 9 4 5 # * #
LG - B1200: # Press together with the boot button, then enter 668
LG - B1200: * 8 3 7 5 #
LG - 5200: 2 9 4 5 # * #
LG - 510: 2 9 4 5 # * 1 # (Network Lock)
LG - B1200: * 6861 #
LG200: No card input ## 1001 #, password recovery to 0000
[NextPage]
(12) waveguide
1200, 1220, 1800, 1820, 3200, 3220 Enter the test state: After the card is turned on, after entering the standby state, press the side key (function key), then press the * button, the screen displays the hotline menu, then display 4 options: 1. Application; 2.Prom; 3. SIM lock; 4.lcd test. (At present, MAS module models (Sakhem machines) such as 1200, 1800, 8288 ... no instructions can be solved, want to relieve only software solutions.)
8xx / 9xx series: Squatinal lock is * serial number 7-14 bit OK; SIM lock is the last one after the serial number; the test instruction is "down, *".
S1000: Enter * # * # 1705 # After entering the engineering mode, select 4 and then select 6 (careful use, will cause electricity code: 24681357
SC02: Universal Password 12345678; Enter Engineering Model # 123321 # *
S1500: Universal password is 19980722;
SG1100: Universal password is 24681357
V08: The card is turned on "SOS" and then enter the 4268 # Earlier Press * will display the password; the test instruction is a card-free boot input * 789, long press #
V09: After the mobile phone is locked, the early version does not pick up the card, enter the 753 to enter the engineering mode to restore the factory settings; the new version needs to boot in the card without card, press * Under the top, upload (the navigation key Key) After entering engineering mode, restore factory settings, you must continue to operate twice, then put it in the SIM card, no need to enter your password, at this time, the mobile phone password is restored to the initial password 0000.
8180 / giyaq1688 / 1699 test instruction: * # 369 #
S1000A test instruction: * # 301 #
G100, G200, GC600 test instruction: 2945 # * #
(13) TCL
The TCL mobile phone is unlocked. You should look at the LOT number unlock, the LOT number is 8 digits, the first number represents the year, the second digit represents the month, the third digit represents the date, the 4th, 5th, 6 digits represent the production lot number, The 7th represents the software version and the LCD vendor code, the 8th digit represents the module model. LOT No. 8: 0 is 2C module, 1 is 2C2 module, 4 is 2D module, 5 is the GM230 module, the first two modules can be unlocked in the order, and the latter two can only be upgraded with software.
Master password for the TCL8XX / 9XXX series: Enter * # * # 1705 # after the card state, enter the engineering mode and then select 4 Select 6 Restore the factory settings. (The card is easy to cause the caller ID)
TCL8198 / 8298 Solution Lock: Enter * # * # 1705 #, then press the transmit button to enter the engineering mode
TCL2 series / 5 series unlocking instructions: * # * # 5625 # Test instructions * 83786633 # 进行 宝宝 箱; If your phone is 02, 03, 02 or higher, only need to enter * # * # 5625 # Can unlock. If you need to upgrade to 02,03,02, you need to unlock it. Look at the 2898 software version is first entered * 83786633 #, then look at the "Test" in the "Treasure Chest" in the menu.
TCL3188 solution network lock: card input 246135
TCL3988 On Key Padlock: Press the middle menu down key and # key to lock; press the left softkey and # key to unlock.
TCLQ510 / 718/728/3998 test instruction: * 83786633 #
TCL Ray 618 Test Directive: * 01763 * 476 #
TCL668 test instruction: Press the * button and the boot key
TCL9X9 series mobile phone test instruction: input * 01763 * 3666 # 01763 * 3666 #
TCL Schneider Series Mobile Phone Test Directive: No Card Press * → * ← ← * ← *
TCL business machine 3000 unlocked: Press and hold the * 0 # simultaneously, press the boot button, the phone enters the test state, then press the right button all selected, then press? *** 蠹 袷 袷 珊 苈Chatage is uniform? Increase)
TCL Pastinal E757 / E767 Unlock: In the case of mobile phone cover, press and hold the OK button and switch button, install the battery after installing the button, the screen prompt "Is the file system?", Press the OK key to confirm, The password naturally released after formatting. (increase)
(14) Science and Technology
Cojian vintage mobile phone does not add card tune menu: * # 722 #; check version number, factory date: * # 701 #; Reset chip unlock: * # 715 #; Adjust contrast: * # 760 #
Kejian K3000 can't use the recharge card recharge: input * # 9918 * 106 * 1647 # or * # 9918 * 106 * 6538 #
Ke Jian 6300 unlocked: * 2767 * 2878 #
Kejian K518 unlock: Solution lock password is * 2767 * 2878 #; Solution SIM card lock password is * # 8999 * 947 #
(Fifteen) Panda
GM958 / 968/988/100/600/800/818 Unlock: No card is powered on, enter 0718 # and then press the * key to enter the engineering mode, then select Factory to restore the factory settings can be unlocked. (Panda GM958 / 968 is the 11th, GM100 is 4, others can find themselves.)
Panda 958/968 Watch Software Version: Enter 0789 # * (Long Press *) without card
GM3550 / 5510 test instruction: no card input 878 (increase)
GM718 / 818 Test Directive: Do not add card Press Right * Left left * left * (income) GMP310 test instruction: * # * # 672 # (income)
GM828 / 3551 Test Directive: No card Press the right right * left left # Right # left * (income)
(16) Dongxin
Dongxin 720: * # * # 1705 # Enter the menu option, restore the factory settings, you can solve the SIM lock (careful use, will lose the record)
Dongxin EL650 / 760 / 760C / 860/818 unlock: no card is turned on ## 1001 #, PCK reset; enter 0000 OK!
Dongxin 660: 19980722
Dongxin EX369 keyboard lock: # * 5264386264, display password; phone lock: 1215
Dongxin EG730 unlock: 20021226 20021206
Dongxin 788 relief lock: Power on the card with a voltage regulator power supply, etc.
(17) Dibit
Universal mobile phone unlocking method: enter # * 80 # Enter the test status, then enter # * 761 format to resolve the lock
(18) Southern Society
Southern High Society S320 / EB232 unlocking instruction: no card is turned on, enter ## 1001 #, then load the card boot input 0000
Southern Higher Education Hi70 unlocking instruction: mobile phone card is turned on, press SOS, then enter 4268 # and then press the * button to display the unlocking password.
Southern High-tech 777/778 unlocked secret: Power on the power supply, etc., etc. .
Southern High Society S600 Unlocking Directive: This machine motherboard is the same as TCL2898, and can be unlocked with * # * # 5625.
Southern Gaoke Hi700 / S700 / S710 Unlocking Directive: No card boot, input * # * # 1705 # Add OK to enter the engineering mode, then select the 9th dispensing.
(19) Xia Xin
Summer New A6 / A6 / A8 / A8 / A80 Test Directive: Enter * 789 Press #
Xia Xin A6 / A8 / A8 / A80 unlocking instruction: The phone does not push the card, press SOS, then enter 4268 #, press the * button to display the unlocking password.
Summer New A8298 Switching Chinese and English Directive: * 99 #
Xia Xin A8398 phone initial password: 000000
Summer A6 / A8 / A8 crash after the crash, the battery and signal symbol cannot be turned on: Press the * key and the boot button at the same time.
(20) Konka
Konka K3118 / 3118 / 3228 Solution lock: Do not add the card input ## 1001 #, then the card is turned on 0000; SIM card lock: * 94726501 #; Open key disk lock: Press the function key and 4 lock, press function The keys and 5 unlocked.
Konka 3238/7388 unlock: Do not add 19980722, then the card is turned on 0000
Konka 3268 unlock: no card input * # 0000 #, card boot input 1234
Konka 5218/5218 / 5219/7268/7899 Unlock: no card boot input # 8879576 #, card input 1234
Konka 5238 unlock: no card input * 5238 * # 2002 # Konka R768 / R769 unlock: # 20021208 #
Konka C688, C699, C869 unlocked: ** 0102 #. (Must be upgraded)
Konka KC66 / 88 unlock: The card is turned on press "Menu" and 0070571, then select NV_READ, LOCK_CODE.
Konka KC827 decision disk lock password: ## 835766 end
Konka 6288 unlock: * 6288 * # 2002 #
Konka C868 / R6188 / KC826, etc. must be unlocked with software upgrade
(一) Haier, GVC
Haier 6910, 7910, 7920, 7930, 8018 / GVC168 / 268/668 Unlock: Mobile phone requires "SIM card lock password", entering four zero can not unlock, turn the mobile phone shut down, remove the SIM card, boot "## 1001 # ", at this time, the mobile phone shows" SIM card lock password has been reset ", putting the mobile phone turns on the SIM card, and enter" 0000 "when the" SIM card lock password "is displayed.
Opening star 3000, Tianxing 3000 unlock: ## 8879501 # / # 8879576 #
Haier (TZ1000, T6000) View version: First lose # * 80 #, lose # * 17 #
Haier Z1000 unlock: # 20021208 #
T9000 Unlock: Enter # 7233 OK in standby mode, password to return to 0000, this is a firewall password; enter # 20020405 # ok in standby, this is a mobile lock.
Haier Y2000 unlocked: Enter * 2850 # Enter the test mode, select the factory settings, left click confirmation, password recovery to 0000
Haier H6988 test instruction: * # 301 #
Haier 79 Series / H8018 / D3000 Test Directive: Press and hold the # key and turn button in shutdown, then enter 668
Haier K1000 / XDX1000 / XDX2000 Test Directive: Enter # ** 3487 * # in standby
Haier YDN2000 Test Directive: Press and hold the * 0 # at the same time, then press the boot button.
Haier HC1000 / HC2000 Test Directive: Input * # 3001
Haier HK3000 / HTZ3000 Test Directive: Input # 03 # 03 # 03 #
[NextPage]
(廿 2) Time Time
Tian Tuda T6 unlocked: no card is turned on, press SOS to play 112, then quickly hang up, repeated a few times, you can go to the phone lock into the standby state; then enter the confidential function to turn the lock.
Tian Tuda V88i unlock: no card boot, enter # 8879509 # or # 8879576 #, then add 1234
Tianta T31i unlocking instructions: # 8879510 # (increase)
Heaven Tour part of the mobile phone unlocking instruction: * 2002 * # 2002 # (income) {stand}
(三) Other
Da Dish 76 Series Unlock: * 528 * 737381 #
Grand 78 series unlock: * 528 * 737382 #
Lenovo 288/300 Unlock: Enter 2945 # *, enter the test mode, select Restore factory settings.
Lenovo mobile phone solution network lock password: (increase)
G820: * # 111 # G530 / G818: 2945 # * # G678: * # 0000 #
Dibit 2017 emergency unlocking method: Power on the card Will flash, "Please wait", don't take it, wait for a while, will successfully go to the standby state. However, this method does not turn off the phone lock, after the phone is turned off, you must re-perform the above steps. The first letter C5088 unlock: input # 5625, back
Tianlong T6, T8, T80, T88, T90 reliege lock: The card is turned on with the voltage regulator power supply. After the signal is sent, call 112, then take the card, then call 112 three times, the mobile phone automatically crashes, etc. 3 seconds Automatic boot, unlock success. This method is also applicable to Dibit, Oriental Dragon and other mobile phones.
China Bridge C188 unlocked: press SOS, then enter 4268 # * (* long press) to display a password.
China Bridge DX Series / C308 Unlock: 0124; Decryption Panch: Press to hold #, then enter 0124, press Enterprise.
Top 111 unlock: no card input * 544 * 745625 # re-card boot. This password can also solve the links I188, Tianlong I90, CECTI889 and other mobile locks
Morning Morning Mobile Phone Lock Directive: Do not insert, enter * # 9922 # Enter the phone menu, select the factory design in the phone setting, press Yes to determine the post display reset determination and then automatically shut down. Power on the card, OK! Check version instruction: * # 9900 #
Search: Enter * 2580 * # Enter mobile phone engineering mode, choose the 6th-chip reset, OK! (Will clear the phone number in your phone, preferably test machine card)
Tian Beisi (Toplus) unlock: When the card is turned on, press SOS to press 4268 # * (* To Long Press) to display the password
Hongji 70: 19980722
ZTE A100, A200, A300 Unlocking Directive: Insert, In the standby state, enter * 983 * 737381 # After confirmation, remove the electric board and heavy? *** 吧 绨蹇 琌 K! (modify)
ZTE A100 / A200 / A300 Check Software Version Directive: * 983 * 837 #; Internal Outer Screen Contrast Adjustment Instruction: * 983 * 523 #.
Xiahua XG520 / XG839 unlocking directive: 19980722
Xia Xia 1100 Script Lock Direction: * # * # 1705 #
Xiahua 2000 eliminates the smile in the lower right corner of the screen: Press C button
CECT mobile phone unlocks: Like the Philips lock code, try to unlock with * # 7489 *.
Doctor SIM card unlocking instruction: * # 9100 #
Xitel GW710 phone password and PIN code original password: 12345; Silent mode: Press and hold the * button.
Weike 100 unlocking password: 0124
Modern 4000 unlocked: input # 5625 *, press End (Mount Key), select 1.
Yingzi (OKWAP) 163/166 relief lock: The phone does not add the card, first press the button on Yes and Yes, then press the NO button to open the engineering mode unlock.
Yingzi reached I66 unlock: Press and hold 1, 4, 7 button, then turn it on to enter the test mode, select Restore the original settings.
Fourth, CDMA mobile phone secret
1. Southern High-Tech 9988, ZTE 818, CEC Tuildar 628 manual unlock: After the card is turned on, the input # 5625 * will appear when 4 horizontal lines, will appear Lock Code, then press OK to see the password. 2. Waves Cu100 / LG6060 / T410 and other LG series include partial machine card integrated CDMA mobile phone unlocking instructions: 1477
3. Dongxin EX200 manual unlock: The card is turned on 112, etc. After the timing occurs, stop according to 0808 ... 20 seconds, the end; press the shutdown button, press the long press # 就;; then ** 321456987 ## 000000 OK, determine, see the password.
4. Dongxin EX280 manual unlock: 132147 * 0 # 569 # 01 # 636 2 # 12580 # 36547 * 35759 # 3 * 4569 # 47 * 0 # 2 4 * 1234567890 # (All card is turned on)
5. Dongxin 369 relief lock: Enter the card when the card appears 4 horizontal line # * 5264386264
6. Dongxin part mobile phone unlocking directive: 1215
7. Haier 1000/2000 manual unlock: 2327
8. Lenovo 288 test instruction: * 888 * 888 #
9. Wave 100 unlocking instructions: * # 7608 * 1234 #
10. Motorola CDMA V730 unlocked: Enter 25 * # rrr after the card is turned on; then enter the password 071082, then there will be a menu, select the third Data Port; then there is a menu, select the second Item Uidiagusbds will automatically reset. This mobile phone password is changed to the original password.
11. Motorola V680 unlocks: When the standby is input, enter the 25 * # record button twice, enter 071082 Enter the test mode, enter the second common command, and select to Initialize Carrier, press Edit, prompt the reset is - No, press to restart OK ! (Only in standby)
12. Datang DT668 unlocking instruction: 123 * 580 # 01 # 737, enter 000000 confirmation.
CDMA series solution network lock instruction
Hisense C520: Enter ## 8462 ## ** Left Function Key, then enter * 465819375 # Select 1
Hisense C2198: Enter * 465819375 # prompt to enter the password, then enter * 465819375 # prompt to unlock and select 1.
Hisense 3698: The card is turned on 112. After the timing, press the shutter button, then press 1 button to OK.
Waveguide C58 / Southern High-tech 9688 solution network lock instruction: mobile phone prompt input password: ## 1114 END, mobile phone enters the implied menu, select Activate UIM, the phone is automatically turned off; then the boot network lock has been canceled; if you enter the implied menu Tip Enter the password, the new version is 0000, the old version of 1234.
Samsung N299, A399, A539, A599 manual unlock: Enter * 759 # 813580 Enter factory mode, press 29, wait a few minutes to reload the battery is OK
Samsung A599, A399, A539, N299 Main Clear: M * 123580 0 Select "Yes" to see Software version: m * 123580 9.
A809 Main Clear: M # 123580 # OK
X319 Test Mode Directive: * 759 # 813580
Samsung x199 main clearance: M 8 * 123580 0 Select "Yes". View Software Version: M 8 * 123580 # Samsung X199, X319 Manual Unlock: Enter * 759 # 813580 Enter factory mode, press 73, press after a while, press # 02
Dongxin 280 old version of the network lock: Cashup input 32147 * 0 # 569 # 01 # 626, mobile phone shutdown, turn it on! (The replacement card has to be re-unlocked)
CDMA 8700 Solution Lock: 654789 # 0 * 47 * 5698147359 1
Software solution CDMA various types of phone lock unlocking methods
1. Connect the BOX online light, you can connect with the CPSTDM6V15 (rotating small earth in the upper right corner): 9988, 818, KC66, KC88, C628, C58, 9688, 9288, 806, C520 (Distribute), C680, 816 , CEC736, C8000, CEC626! Directly read the password with the command "nv_read lock_code".
2. Connect the BOX online light, but cannot be online CPSTDM6V15 (small earth in the upper right corner), to use other methods to fix the rate, can be online online with: EX280 .GCP-3400. SCP-3000. LG8080. Cu100 , T410, 6060, EX200, Datang 618! Read the password with the command "nv_read lock_code"! Software online method ---- Continuous mobile phone, run Konka upgrade main program Panda, appears in COM1 (that is, find a mobile phone), turn off this program! Open CPSTDM6V15, you will find a small earth.
3. The models that need to be unlocked in the upgrade software are: V680, V730, KZ610, KZ660, Samsung full range. (Note: KZ610, KZ660 method 1 Read the password is 0000 ---- No matter how much is the password, the method 1 cannot solve this phone lock!)
4. Dongxin 369 directly uses "CITIC" to unlock the software, and select 369.
5.V8060 uses its dedicated DM solution! Run the DM in the V8060 directory, press F8, read the password with the command "NV_Read Lock_code".
6.v680, V730 directly uses the read code function in its upgrade program.
Five, Xiao Lingong secret
1.700, 700UC, 700UT, 318, 618, 718: Read the PIN with a writer, is the lock machine.
2. Lucent 717: Press the Phone Book, # # and the boot button at the same time, select 06, and press Yes.
3. PS12: At the same time, press 2 4 boot button to enter the test state, then press 5 6 OK; reboot, enter 0000
4. Like Langxun 618, press 2 4 boot key, press F, 6
5. Putian 1689, 1689 wants to unlock software
6. The password of the U machine is generally: 0702; 2345
7. The UT series of small-lived initial passwords are 6 8
8. PS-10 and 700U and other small low-pass initial passwords are generally 4 connected numbers together
9. UTA66, Putian 212, PS608, PS618 unlock: Press 2 4 on the shutdown state, then press 5, then press the ring tone adjustment key (mute keys), press F and press 6 to reset. There is no signal after reset, then enter the online status Press 8 and then adjust the arrow to TR and then turn it on the public and reboot, OK! The current password is 000010. Xiaomingtong 020 restores factory settings: Press the F button for two seconds, then "EX ..." is pressed 4, 1
11. ZTE Little Lingtong Unlock
WT112: Press and hold the "# /?" Button to unlock it.
WT030: (1) A - Press 0-9, enter the 4-digit dial-up code, press the F key, the dial lock release sound, unlock the dial lock; B-dial lock Press the F button for 2 seconds or more "Exppansion f" then press 5 key to enter a 4-bit password; press F to complete; unlock Press the F button for more than 2 seconds, press 5 key to enter the old 4-bit password and then enter 0000 to cancel Press F.
(2) Keyboard lock Press #> 2 seconds to appear in English Select 1 Start keyboard lock, press #> 2 seconds to appear English Select 1 Close the keyboard lock.
(3) Total reset length Press f Selection 4 to select 1 to return the factory value.
WT020: Total reset length Press 4 to select 1 after Press F; unlocking casually entering 4 digits and press the FUNC key.
C66: Press and hold the "Call / Determined" button to automatically unlock.
UTS708SY: Press F.
Sixth, notes
(1) Various locks in English
SP lock: English name Service Prorider, referring to operational business lock code
ENT lock: network lock
IMSI lock: user identification code lock
Key lock: keyboard lock
CP lock: national lock
PIN lock: personal identification code lock
PUK lock: personal unlock code lock
SIM card lock: user identification card lock
(2) Some mobile phone keyboard lock switching method:
Motorola phone: Press and hold the * #
Nokia Mobile: Press the function key and press the * key
Ericsson mobile phone: Press the left button YES button
Siemens mobile phone: long press # key
Acer mobile phone: Press the call button again *
Panasonic mobile phone: Press the menu button twice
Samsung mobile phone: Press * to press the OK button
Alcatell phone: press 159 to decorate
(3) The order of foreign language reform Chinese is generally: Menu (menu) -Settings (setting) -Language (language) -Chinese
