Most hosts are now configured, and it is convenient for finishing. I. Based on server preparation 1, WIN NT installation directory: C: / Winnt folder; 2. Server type: "Main domain controller"; 3, computer name: "Heatch"; 4, domain name: "Lanhome ". The above two items can be re-specified by "change" of the Control Panel / Networks / Identity item. 5. "Microsoft DNS Server" has been installed in "Control Panel" / "Network" / "Services"; double-click "TCP / IP Communication Agreement" to TCP / IP in the "Control Panel" / "Network" network protocol list Property Settings dialog. Click the "DNS" tab, the host name is Heatch - if another name is entered here, the system will appear differently about the hostname of the local area and the host name used by the Internet - Type in "Domain" Domain Name COM, add the host heatch IP address in "DNS Server Search Order", 199.168.1.1; and then click the "IP Address" tab to get next: 6, in the Control Panel / Network "/" Protocol " "TCP / IP Protocol" is installed; select "Specify IP Address" in the IP Address dialog, type 199.168.1.1 in the IP address bar, press Tab to jump, the system will automatically give the subnet cover Code 255.255.0.0. Click the Advanced button to enter the Advanced IP Address dialog box, click the Add button in the IP Address bar, join the WWW, FTP host IP address: 199.168.1.10 255.255.0.0 WWW 199.168. 1.11 255.255.0.0 FTP and then click the "OK" button, click the "WINS Address" tab into the next step: 7, "Microsoft WINS Server" is installed in Control Panel / Network / Services; Type the IP address of Heatch in the "Main WINS Server" field 199.168.1.1. If it is installed or made for the first time, the system will prompt to restart after confirmation. Second, IIS Manager configuration, application 1, installation IIS: IIS: Select "Installing the Microsof Internet Information Server" check item while installing NT Server 4.0, or installing NT Server 4.0 after installing. The TCP / IP protocol must already be installed before installing IIS. Here's how to install IIS services in a Windows NT environment: Select "Start" / "Set" / "Add", from the Network Service list, select "Microsoft Internet Information Server, and then click the "OK" button to enter the installation of IIS. Select Internet Service Manager, WWW, FTP service, ODBC launcher and management. The default installation folder is C: / WinNT / System32 / InetSrv; the default service folder is C: / INETPUB / WWWROOT and C: / INETPUB / FTPROOT. You can also run the installer INetSetup.exe directly in the / i386 / inetsrv subdirectory of the Windows NT installation disc.
2. Configure the DNS Domain Name Server: Select "Start" / "Programs" / "Administrative Tool (Public)" / "DNS Manager", "Domain Name Service Manager" main window, the host name has been listed in the server list For the server of Heeatch, click Right click, select "New Area" in the pop-up menu, select "Main" / "Next" in the dialog, "Region Name" in "Creating a New Area" dialog box " An input COM, pressing the Tab key to walk to the "Area File", the system will automatically give the COM. DNS file name. After confirming, you can see the right side of the Domain Name Service Manager main window already lists the new area heatch attribute value. Select COM, click Right click, select "New Domain" in the pop-up menu, enter Lanhome in the dialog, create a Lanhome area under COM. Choose the Heatch domain, right click, select "New Host" in the pop-up menu, enter the hostname WWW and the host's IP address 199.168.1.10 in the New Host dialog 199.168.1.10; Determine the IP address of the hostname FTP and host 199.168.1.11. After determining, close, www.lanhome.com, FTP.lanhome.com is established. Verification: Open the browser, enter www.lanhome.com in the address bar, do you have a page about IIS? 3, configure the WWW server: We created a Lanhome folder in the C: / Inetpub / wwwroot folder and copy all the pages of this website to it (in the following narrative, this folder is also our FrontPage 98 website) Directory), here we use it as the home directory of the WWW server. Select the "Start" / "Program" / "Administrative Tool (Public)" / "Internet Service Manager" command, there is a "Microsoft Internet Service Manager" window, which lists the current ongoing Internet services. Double-click the "WWW" service to enter the "Web_Server's WWW Service Properties" window. In the Properties dialog box, select the "Directory" tab, click the Add button, click the "Browse" button in the Catalog Properties dialog box, find or directly enter the C: / INETPUB / WWWROOT / LANHOME, select the "home directory" "Item, select the" Virtual Server "item, enter the IP address of the WWW server in the IP address bar below, and select" Read "and" Execute "in the Access bar. After confirming, return to the "Directory" dialog box, you can see the "Enable Default Document" column is default.htm (can change to the default document name you need), generally do not select "Allow Directory Browse". Verification: Open the browser, enter www.lanhome.com in the address bar, is there a "Blue Net Home" home page? 4. Configure the FTP server: We created a public_html folder in the C: / Inetpub / FtProot folder for users to upload the personal home page. Select the "Start" / "Program" / "Administrative Tool (Public)" / "Internet Service Manager" command, there is a "Microsoft Internet Service Manager" window, which lists the current ongoing Internet services. Double-click the "FTP" service to enter the "Web_Server's FTP Service Properties" window.
Add C: / INETPUB / FTPROOT / PUBLIC_HTML to "Directory" and select the host directory, select "Write" in the Access bar; switch to the "Information" tab, "Welcome Information" and "Exit Message" column When you enter the FTP, you can bid yourself when you enter the FTP, you can bid farewell; in the Service tab, you can also specify an anonymous username and password. Verification: Enter: ftp ftp.lanhome.com, next to the system requests the username and password, the system default username is anonymous, the password is an email address. If everything is correct, you can see the welcome words you just entered. For configuration information about the FTP server, see "FrontPage 98 SiteFTP to NT Server". Third, the Upload of the FrontPage 98 website mainly tells the version of the FTP server in IIS in the "FrontPage 98 website FTP to NT Server", and how to upload how FrontPage is uploaded, where we will add it, Describes how to upload the home page through ACEFTP. First, you must create an account for each user and set your password for them to upload, update your personal homepage. The steps are as follows: Select "Start" / "Domain User Manager", create a new user in Domain User Manager, in addition to the regular user name and In addition to password, it is not possible to ignore access to the account to be dial-in permissions. Click the "Dial In" button to enter the "Dial Info Information" dialog box and select "Dial-in Permissions". In this case, the user name is houst, the password is empty, allowing dial-in permissions. With regard to the method of uploading the personal homepage to the server through the ACEFTP, you can refer to "" ", but here you have to add, because FrontPage generates some system folder that generates itself when establishing and managing the site, saves page update messages. And it is actually published when it is released, so it is not possible to simply upload all the files in the FrontPage to the server - because those system folders are not visible, so you can first in MS-DOS mode Use the XCOPY / S command to copy the FrontPage website to another directory, upload it. In this example, we created a folder heatch for Heatch in public_html, and uploads the page of its FrontPage website to this directory. The FTP directory is ready, followed by configuring it in the WWW server. Go to the Internet Service Manager, double-click the "WWW Service" to select the "Directory" tab, click Add, browse or enter the C: / INETPUB / FTPROOT / PUBLIC_HTML / INETPUB / FTPROOT / PUBLIC_HTML / INETCH folder, follow the "Virtual Directory" item. In the "alias" column, enter "/ ~ heatch", set it to executable, and then exit after confirmation. Verification: Open the browser, enter www.lanhome.com/~heatch in the address bar, do you have a personalized new page, is it the same as your own personal homepage address: http://go.163 .com / ~ lanhome? So, how is the BEST in Best.163.com here? How do we configure it? The method is very simple, adding a server in DNS.
Go to Domain Name Service Manager, select Lanhome.com, right-click, select "New Main End" in the pop-up menu, enter the heatch, the IP address is 199.168.1.12; enter "Internet Service Manager" Double-click the "WWW Service" to select the "Directory" tab, double-click the C: / INETPUB / FTPROOT / PUBLIC_HTML / HEATCH item we set up, but now you have to set it as a home directory, then activate the Virtual Server option, Enter 199.168.1.12 in the IP address bar below. Verification: Open the browser, enter heatch.lanhome.com in the address bar to see, is it a feeling? FrontPage 98 Website FTP to NT Server In "PC can also use the ASP" article, we are talking about how to create a personal website in a single-machine environment. If it is a mating FrontPage 98, it is transferred when publish. In the wwwroot subdirectory of the INETPUB directory, the website name is copy_of_webname (here WebName is the directory name you entered when you run FrontPage). Therefore, for a single machine, Publish has no special requirements or difficulties. But for a medium, small companies, if each user is needed to upload the web page of the department or group of yourself to the server, you need some cumbersome procedures. After several experiments, we successfully realize the FTP feature of the FrontPage 98 to put web publishs on the Windows 98 workstation to the IIS server. Summarize as follows (this article is available in Windows NT Server 4.0 itself as an example: approximately the steps are as follows: 1. Prepare FTP services and log in to the user II, set the FTP service three, transfer one, ready to work 1, if there is no IIS (Microsoft Internet Information Server 2.0), you should install, the installation path is the INETSRV subdirectories under the NT CD I386 directory, and the installer is Inetsetup.exe. Note: If you do not need a Gopher service, you can cancel the check box; if the system is installed in the ODBC driver, it should also be canceled, otherwise it will be mistaken during the start of the version; in addition, during the installation process, Will there be a dialog box that allows guest users to access the FTP service, and select "No" There is no significant impact on the following process. The installation is successful, the "Program" group in the startup menu appears, "The Internet Service Manager" will be in an important position in the following explanations. 2. If you have not configured an account for a workstation user, you should go to the "Start" / "Domain User Manager" to add, for FTP users, as long as it is domain users ( That is, Domain Users.
3 C: / inetpub frontPage 98 website directory path: c: / inetpub / wwwroot / lanhome 2, configure FTP service 1, select "Start" / "Programs" / "Music" / "Internet Service Manager", A "Microsoft Internet Service Manager" window appears where the currently ongoing Internet service is listed. 2. Double-click the "FTP" service to enter the "Web_Server's FTP Service Properties" window. (1) First is the "Services" page box TCP port to confirm the port of the currently running FTP service. Using the default port 21. The connection timeout value is set in seconds to set the server to disconnect and non-active users after waiting for a certain time. Its range can be between 100 and 32,767 seconds, and the function is automatically turned off after this time when the FTP protocol cannot close the connection. The default is 900 seconds. Allow anonymous connections and only allowing anonymous to connect this two most important. The former sets all the Windows NT user accounts used by all anonymous connection permissions. As long as the FTP service system in IIS will automatically create an IUSR_Web_Server account in Windows NT's Domain Manager and Internet Service Manager (here Web_Server is the computer name), pay attention to it is installed. You must specify a password and set the password of the two places to match. By default, IIS creates and uses the IUSR_WEB_SERVER account for all anonymous logins. However, you can't use this username and password to log in and access the FTP service on the Windows 98 workstation because it is only for Windows NT, and the user should have "local login" power. Generally speaking, anonymous FTP users can use "anonymous" as the username, log in with the email address as password (this is the same as the default user ID used in the ACEFTP program). Only the role of anonymous login is to prevent access using an account with administrative privileges, after selecting this, even the administrator account cannot be logged in, FTP can only manage "local access" by logging in to the server. Therefore, for internal networks, you can cancel the "Allow Anonymous Connection" box (2) "Directory" page to select the Add button, appear "Directory Properties" window; click the "Browse" button, select the directory "The window determines the directory path to the FTP service to use, in this case D: / INETPUB / WWWWROOT / LANHOME (note, the Lanhome here is a new subdirectory in the wwwroot directory); select" Access "to write ", Click" OK "to return; in the" Directory Properties "window, select the" Virtual Directory "radio button, enter" Lanhome "in the" Alias "column (there are two purposes, one is only in FTP only Indicate Lanhome without having to manage which disk is located which disk is located, which can prevent malicious in the original directory invading); for a list of directory list, because most browsers accept UNIX format, so for maximum compatibility Select UNIX format.
