1. Create a new part after opening the UG.
2. Enter the modeling module.
3. Define the work surface to automatically select three coordinates. Define the coordinate axis and automatically select a three-axis coordinate.
4. Enter the sketch work surface, sketch design, then label, constraints, and modifications.
5. Return to model, perform solid stretching, chamfering, and editing,
6. Perform a layer setting. It is generally divided into two layers, the entity is in one layer, and other layers.
7. Enter the drawing module and out. Select the view you need.
8. Set the layer of the drawing. Label over one layer, other in another layer.
Note: 1. When new parts are new, the unit is centimeter.
2. The use of the mid-layer and autocad is similar, set and edited, using the filter will be much more convenient.
3. You should first define the working surface in the mapping, and the matrix is used to use parameterized graph to facilitate modification. Try to use the entity directly modeling.
4. The above is just a probably chart standard of our laboratory, and different companies will have different standards for reference only.
