Color = red] 1. Stop error number: 0x0000000A [/ color] Description text: Irql-not-less-or-equal usual reason: Driver uses an incorrect memory address. Solution: If you are not logged in, Start your computer. When the available operating system list appears, press the F8 key. On the Windows Advanced Options Menu screen, select "The last correct configuration", then press Enter key. Check if all new hardware or software is installed correctly. If this is a new installation, please contact hardware or software manufacturer to get any Windows updates or drivers that may be needed. Run all system diagnostics provided by computer manufacturers, especially memory checks. Disable or unload Fall newly installed hardware (RAM, adapter, hard disk, modem, etc.), drivers or software. Make sure the hardware device driver and system BIOS are the latest version. Make sure that manufacturers can help you have the latest version, but also help You get these hardware. Disable the BIOS memory option, such as cache or shadow. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------- 2. Stop Error number: 0x0000001e Description text: kmode-esption-not-handled usually: Kernel mode Process Attempts to perform an illegal or unknown processor instruction. Solution: Make sure there is enough space, especially when executing a new installation If the stop error message indicates a particular driver, then disabled. If the computer cannot be started. You should start using the security mode to delete or disable the driver. If there is a non-Microsoft supported video driver, try to switch to Standard VGA drivers or Windows provides appropriate drivers. Disable all newly installed drivers. Make sure there is the latest version of the system BIOS. Hardware manufacturer can help determine if you have the latest version, or help you get him. BIOS memory Options such as cache, shadow. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- --------------------------------------- 3. Stop error number: 0x00000023 or 0x00000024 Description text : FAT-FILE-SYSTEM or MTFS-FILE-SYSTEM Usually: The problem appears in NTFS.SYS (allowing the system to read and write the NTFS driver driver file). Solution: Run System diagnostic software provided by computer manufacturers, especially hardware diagnostics software. Disable or uninstall all anti-virus software, disk defragmentation, or backup programs. By running the chkdsk / f command at the command prompt, check if the hard drive is damaged, then Restart your computer. ---------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------ 4. Stop number: 0x0000002e Description text: Data-Bus-Error Usually: System memory parity error, usually caused by hardware problems. Workaround: Remove all newly installed hardware (RAM. Adapters. Hard disk. Modem, etc.). Running system diagnostic software provided by computer manufacturers, Especially hardware diagnostics. Make sure the hardware device drivers and system BIOS are the latest version. Use the system diagnostics provided by hardware vendors to find memory checks to find faulty or mismatch. Disable the BIOS memory option, such as cache or shadow. When the list of available operating systems appears, press F8. On the Windows Advanced Options Menu screen, select "Start VGA mode:. Then press Enter key. If this does not solve the problem, you may need to replace a different video adapter list For a list of supported video adapters, see Hardware compatibility lists. ----------------------------------- ---------------------------------------------- 5. Stop number : 0x0000003F Description text: no-mor-system-ptes usually: Each 哟 Clean up the driver. Solution: Disable or uninstall all anti-virus software,
Disk debris handler or backup program. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -------------------------------------- 6: Stop error number: 0x00000058 Description text: ftdisk -Intern-error: A host drive in a fault-tolerant set fails. Solution: Start your computer with a Windows installation disk, boot from the mirror (2) system drive. About how to edit the boot.ini file to point to the mirror Search "Edit Arc Path" in the Microsoft Support WEB site in Microsoft Support WEB site. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------- - 7. Stop error number: 0x0000007B Description text: INACCESSI-BLE-Boot-Device Usually: Initialization I / O system (usually guidance device or file system) failed. Solution: Boot sector virus usually leads to this Stop error. It is the latest version of the anti-virus software. Check if there is a virus on the computer. If the virus is found, the necessary do not find him from the computer, please refer to the anti-virus software documentation to learn how to perform these steps Remove all newly installed hardware (RAM, adapter, modem, etc.). Check the Microsoft hardware compatibility list to ensure that all hardware and drivers are compatible with Windows. If you use the SCSI adapter, you can remove from hardware suppliers Get the latest Windows driver, disable the SCSI device synchronous negotiation, check whether the SCSI chain ends, and checks the SCSI ID of these devices, if you are unable to perform these steps, refer to the hardware device document. If you use IDE The device, defines the IDE port on the board as a unique main port. Check all IDE devices from the IDE device. Remove all IDE devices other than the hard disk. If you can't confirm how to do this,
Refer to the hardware document. If your computer has formatted using the NTFS file system, you can restart your computer, then run the Chkdsk / F / R command on the system partition. If you cannot start the system due to an error, then the command console is used and run Chkdsk / r command. Run the chkdsk / f command to determine if the file system is damaged. If Windows cannot run the chkdsk command, move the drive to other running Windows, then run the CHKDSK command on the drive from this computer. -------------------------------------------------- ---------------------------- 8. Stop error number: 0x0000007F Description text: Unexpected-kernel-mode-trap usually: usually It is caused by hardware or software problems, but generally caused by hardware failures. Solution: Check the Microsoft hardware compatibility list to ensure that all hardware and drivers are compatible with Windows. If the computer motherboard is incompatible, this problem will occur. Removing the newly installed hardware. Run all system diagnostics software provided by computer manufacturers, especially memory checks. Disable BIOS memory options such as cache or shadow. -------------- -------------------------------------------------- ---------------- 9. Stop error number: 0x00000050 Description text: Page-fault-in-NonPaged-area General Reason: Memory error (Data cannot be swapped to disk Middle). Workaround: Remove all newly installed hardware. Run all system diagnostic software provided by computer manufacturers. Especially memory checks. Check if all new hardware or software is installed correctly, if this is a new installation, Contact your hardware or software manufacturer to get any Windows updates or drivers that may be needed. Disable or uninstall all anti-virus programs. Disable BIOS memory options, such as cache or shadow. ----------- -------------------------------------------------- ------------------- 10. Stop error number: 0x00000077 Description text: kernel-stel-stack-inPage-Error usually: Unable to bring kernel data from paging file The page needs to be read to memory. Workaround: Use the latest version of the anti-virus software to check if there is a virus on the computer. If the virus is found, the necessary steps will be made to clear him from the computer. See all system diagnostics software provided by the manufacturer, especially memory checks. Disable BIOS memory options such as cache, shadow. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ----------------------------------------- 11. Stop error number: 0x00000079 Description text : Mismatched-hal usual reason: hardware abstraction layer does not match the kernel or machine type (usually in the case where the single processor and multiprocessor configuration file are mixed in the same system). Workaround: To resolve this error, use the command console to replace the wrong system file on your computer. The kernel file of a single processor system is Ntoskml.exe, and the multiprocessor system's kernel file is ntkrnlmp.exe, but these files should correspond to the files on the installation media; in installation of Windows2000 and, no matter which Original files will be renamed NTOSKRNL.EXE files. The HAL file also uses the name HAL.DLL after installation, but in the installation of the media, but there are several possible HAL files on the installation media.
