Router Basic Operation Manual
: Accessing the router can use the Terminal console, TTY line, VTY line, SNMP network management and RMON, etc.
Console, use terminals to the router to the router
: Router> En Password: Router # Configure Terminal (enter configuration mode
Router # line con 0 (access to Console configuration)
) In line control, how long does it take to exit the timeout time of console Timeout, password, etc.
. VTY line, corresponding synchronization port, icon Ethernet, Serial, Token Ring and FDDI interface, access to Telnet
Router # configure Terminal (enter configuration mode
) Router # line vty line-number [ending-line-number] (access to Vty)
) Router # exec-timeout minutes [seconds] sets free timeout, exit Telnet access
.Router # password ******* Based on the SNMP network management, specify the Simple Network Management SNMP on the router, so that all SNMP-based network software can manage the router
. Router # snmp-server community string [view view-name] [RO | RW] [Number] Common management system command:
Change the router name
Router # Configure Terminal Router (config) #Hostname Test Test #
Set into the privileged password
Router # Configure Terminal Router (config) #ENABLE SecR Cisco
Establish access to router users
Router # Configure Terminal Router (config) # username name password password
Save the configuration file
Router # Write Memory Configuring Vty Access Password
Copy the configuration file from the web server to the router
NVRAM function command
Turn file into the router from TFTP Server
Copy TFTP Running-Config or
Copy TFTP Startup-Config Display System Image and Configuration Information
Show flash -----
Display system file name, size and other information
Show running-config --- Displays the currently running configuration
SHOW Startup-config --- Display boot NVRAM configuration
. Show version - Displays the software version, BOOT version information, and Flash, DRAM size, and allocated ports. ERASE STARTUP-Config --- Clear NVRAM, enter the initial configuration status
Functional command
Save the configuration file in TFTP Server
Copy Running-Config TFTP or
Copy Startup-Config TFTP Note: When the system is upgraded, please do with your agent help, so as not to lose the operating system file, you cannot start the system
.Catalyst 6509 Operation Manual
SUPER ENGINE
Configuration:
VLAN
Division:
TSMC-6509 (Enable) #set VLAN 1 Name XXX Settings VTP:
TSMC-6509 (enable) #set
VTP Domain XXX (Domain Name) indicating VTP
TSMC-6509 (enable) #set
VTP Server (set 6509 to VTP Server mode)
Set the port VLAN: TSMC-6509 (Enable) #set VLAN 2 (Slot / Port) 3/1, 4-8,
2/1 Set Trunk:
TSMC-6509 (Enable) # set trunk (slot / port) 3/1 ON ISL
Password protection:
TSMC-6509 (enable) #set password ******
(Set the first level password Telnet Password)
TSMC-6509 (enable) #set enable *****
(Set the password enable password entering the privilege)
Note: After the configuration is written, it takes effect without additional saving.
2. MSFC
Module configuration:
VLAN
Division:
Route # config Troute (config) #int VLAN 1route (config-if) # ip address x.x.x.x
Routing setting:
Route (config) #ip route x.x.x.x.x.x.x x.x.x.x
Password protection:
Route (config) #LINE VTY 0 4route (config-line) #password ******
(Set the first level password Telnet Password)
Route (config) #enable secret ******
(Set the password enable password entering the privilege)
Save configuration:
Route # write
Note: After the configuration is written, it will take effect and save (WRITE).
Catalyst 3524
Operation Manual
1
. VLAN division:
3524 # VLAN Database3524 (VLAN) #VTP Domain TSMC3524 (VLAN) #VTP Client3524 (VLAN) # e e) # eit e)
(All VLAN information should be displayed, there is a certain study time)
2
. Set port
VLAN: 3524 # Config T3524 (Config)
# Interface FasteThernet 0/13524 (config-if)
# s sPort Access VLAN 23, set the Trunk of the port:
3524 # Config T3524
(Config)
# Interface FasteThernet 0/13524 (config-if)
# Switchport Mode Trunk 4, Password Protection:
3524 (config) #LINE VTY 0 43524Route (config-line) #password *******
(Set the first level password Telnet Password)
3524 (Config) #enable secret *****
(Set the password enable password entering the privilege)
4
, Save configuration:
3524 # Write Note: After the configuration is written, it will take effect and save (WRITE).
Catalyst 1924
Operation Manual
1
, VLAN division:
1924 (config) #VTP Domain TSMC1924 (config) #VTP client1924 (config) # EXIT1924 # SHOW VLAN
(All VLAN information should be displayed, there is a certain study time)
2
Setting the port
VLAN: 3524 # Config T3524 (Config)
# Interface FasteThernet 0/13524 (config-if)
# VLAN-MEMBERSHIP Static 103, set the Trunk of the port:
3524 # Config T3524
(Config)
# Interface FasteThernet 0/13524 (config-if)
# Trunk on 4, password protection:
1924 (Config) # Enable password level 15 *****
(Only one level password)
Note: After the configuration is written, it takes effect without saving.
At the same time, Catalyst 1924 can be configured by configuring menu.
