Time: 2004/6/18 Author: Robert Email: zsc771120@yahoo.com.cn Keywords: damage to the hard disk bad sectors
Objective: To improve your hard drive repair rate
First round failure
operating:
Replace the new version, suddenly crash, turn off the power. Restart, fault generation, guidance XP is particularly slow, ten minutes have not yet started the screen, start three times, this is the case.
Responses:
1. Start the security mode, like normal startup, ten minutes of machines don't move.
2. Remove the hard drive, blow it with a cold gas machine, cool down, load it to the machine, and there is no improvement in the machine.
judgment:
Damage of hard disk discs.
Second round reading hard disk data
operating:
As a sub-hard disk to read data on the computer, the result computer said that my hard drive cannot be identified, not formatted, let me format the hard disk.
Responses:
Use FinalData2.x to read corrupted files, files can be read. And the software thinks that my partition is NTFS format.
judgment:
The hard disk partition is damaged.
Third round repair hard disk
operating:
1. Try repair with software PQ MeGIC8.0, no success, and accidentally discovered the Chkdsk instruction.
2. Execute the Chkdsk instruction, know the error is "XXXX Segment Unreadable" and "CSC ERROR IN DATA", but the repair parameters of this instruction cannot repair the hard disk.
3. Download HDDREG1.41, you need to prepare soft drive repair hard drive. Start the first version is Demo, the scan is 1.5G will stop. Let you register, depressed. The second crack version is great, scan hard disk (80g) Probably It takes more than 5 hours. Two errors were repaired.
result:
It is already possible to start XP.
Fourth round mark bad area
The new problem appears:
During use, sometimes the hard disk makes abnormal sound (card sound), such as performing service. And open several files.
Responses:
1. Open the hard disk tool.
2. Execute the hard disk scan tool, perform it according to the options below.
result:
The hard disk is no longer ringing.
Fifth round recovery system service
problem:
Why do I start the machine service does not start automatically? I found that some of the services have been dead, what options are not. Starting the service, say, refuse to access.
Responses:
1. Execute the sfc / scannow command, prompt to enter the system disc, can copy the file.
2. Start with the XP CD and use the recovery function.
3. Execute the XP / I386 / Winnt32.exe / Cmdcons to restore the main console.
result:
Like not doing these actions.
to sum up:
1. Is the IDE hard drive not damaged 24 hours?
2. Our hard drive quality is not.
3. Need to establish a process of updating software standards.
The fifth step who has this experience can be referred to?
