Making a system boot disk When you have problems in a Windows system, use the boot disk to boot the system, then find the fault and resolve, let's introduce the method of making the boot disk.
1. Creating a boot disk in Windows opens the control panel, double-click the Add / Remove Programs icon, then select the "Start Disk" tab. The function of the boot disk created here is the most complete, including: Universal optical drive driver, booting the system and supports the vast majority of ATAPIIDE and SCSID drive, so you can install Windows 98 directly from the CD-ROM drive. In addition, it also includes a virtual disk creation program, which creates a virtual disk of 2MB after startup, which is compressed into a CAB format diagnostic tool and the optical drive driver to release on a virtual disk, and then run the disk The speed of scanning, partitioning, formatting and other tool software will be greatly accelerated. Click the "Create Start Disk" button, the system will prompt to insert the floppy disk in the floppy drive, and then after a long wait, you can have a label. 2, create a startup disk under DOS If our Windows 98 system crashes, you can't enter Windows 98, you want to reload the system but didn't start the disk. If your system is still able to enter the DOS state, you can enter the Command subdirectory in the Windows 98 installation directory, then run the bootdisk.bat batch file, you will prompt you to insert a formatted floppy disk, enter The latter label will soon completed the production; otherwise it is only available on the other machine. 3, the homemade universal boot disk first use the format A: / s command to create a boot disk that can boot the startup, the execution command is as follows: Format A: / SCD / Windows / CommandCopy Mscdex.exe A: After completion, from some tool CDs Find the files of universal optical drives, such as IDE.sys or CDROM.sys, and copy this file to the root directory of the A disk. Then you need to make autoexec.bat and config.sys two files, the method is as follows: first make autoexec.bat file: c: /> COPY Con AutoExec.bata: mscdex.exe / d: CDROM1 / L: J ^ z (press CTRL Z End Edit) Next to make config.sys files: c: /> copy config.sysdevice = a: /ide.sys or cdrom.sys / d: CDROM1 ^ z (Press CTRL Z End Edit) After the two files are completed, the optical drive can be loaded with this floppy disk again.
