Does your Windows98 are not close proper? I always have "Start - Close System - Turnover Computer - OK", stay in the shutdown screen does not move? You have to take an forced shutdown - "cut off the power"? do not! Friends, this will "injury"! What should I do? Please don't worry, come with me!
First, try "disabled fast shutdown", everyone knows that the fast shutdown is a new feature in Windows 98, which can greatly reduce the time of shutdown. However, this feature is not compatible with some hardware. If these hardware installed in your computer, it may cause the computer to stop responding, so that your Windows98 cannot be closed normally. Then we disable fast shutdown: 1. Click "Start - Run", type "Msconfig" in the Open box, then click OK; 2. Click "Advanced", select "Disable fast shutdown" check Box, click "OK", then "OK" again; 3. At this time, the system will prompt the computer, restart your computer; 4. After restarting the computer, turn off the computer again, waiting to shut down. If the computer is able to shut down normally, the quick shutdown function may not be compatible with multiple hardware devices installed on your computer, you can contact suppliers installed on your computer.
Second, check the AMP (Advanced Power Management) function 1. Click "Start - Set - Control Panel", then double-click System "; 2. On the Device Manager tab, double-click System Equipment; 3. Double-click Advanced Power Management in the device list, then click the "Settings" tab, then clear the "Enable Power Management" check box; 4. Click "OK"; 5. Restart your computer; 6. Turn off your computer if your computer The problem may be in APM normally. Please close the Advanced Power Management feature.
Third, withdrew from the Windows Sound File 1. Click "Start - Set - Control Panel - Sound"; 2. In the Events box, click "Exit Windows"; 3. In the Name, select (None) ; 4. Click "OK"; 5. Turn off the computer. The problem is caused by exiting the sound file if your Windows98 is properly shut down. To resolve this issue, you can restore sound files or reinstall programs that provide sound files from backups, or you can configure Windows98 to not play "exit Windows" sound files.
4. Check the "Start" folder to determine if the program in the "Start" folder conflicts with the startup process: 1. Click "Start - Run"; 2. In the "Open" box, Type "Msconfig" and click OK. 3. Select the "Load Boot Group Project" check box; 4. Click "OK"; 5. When the system will prompt the computer, "OK" If the computer does not start or shut down normally, the problem may be to clear it from the program loaded from the "Start" folder.
V. Check the config.sys and autoexec.bat files 1. Click "Start - Run", in the Open box, type "Msconfig", and then click OK; 2. Select the "Diagnostic Start" item; 3 . Click "OK". At this point, the system will prompt to restart your computer, click "OK". If the computer is started or turned off, then you can determine the problem with the method of config.sys or the conflict failure caused by the confliction in the autoeexec.bat file: restart your computer, press and hold the CTRL button From the "STARTUP" menu, select "SafeMode"; click "Start - Run"; Type "Msconfig" in the Open box, then click OK; click Clear Config.sys and Autoexec.bat tabs Use this config.sys file in the check box that does not contain the Windows icon, use this config.sys file, click Enable a line; click "OK" to restart your computer. If the computer's startup and closes are normal, the other row is enabled, and the love of step 4, 5 is repeated. In this way, the rows in the config.sys file and the autoexec.bat file are gradually enabled until the problem is found. There is a problem with the problem of the disease! 6. Check internal system issues 1. Click "Start - Run"; 2. In the Open box, type "msconfig", then click "OK"; 3. Click "Advanced", Clear "Advanced Troubleshooting Settings "The" Disable System ROM Interrupt Point "," Disabled Virtual HDIRQ "and" EMM do not include the A000_FFFF "check box, then click" OK "; 4. Restart your computer. If your computer is started normally, repeat the above steps, then select a check box in step 3. Repeat this process until the computer is found to start normally.
7. Check the system.ini file or win.ini file 1. Click "Start - Run"; 2. In the Open box, type "Msconfig", then click OK; 3. In the "General" option In the card, clear all check boxes in "Selective Start", select the "Handling System.ini File" check box, then select the "Processing Win.ini File" check box; 4. Click "OK"; 5. Restart your computer. At this point, if your computer does not start or shut down, you indicate that your hystem.ini or win.ini file has problems. Please check each item carefully to determine the reason. After determining an entry that causes a problem, delete this entry or add this entry or modify this entry to resolve this issue. Eight, check the BootLog.txt file Please use the text editor "Notepad" to check the Terminate = entry in the bootlog.txt file. These entries are located at the end of the document, which can provide a certain clue for the cause of the problem. If the last line of the bootlog.txt file is: Endterminate = kernel, your Windows98 can be successfully closed. If the last behavior of the bootlog.txt file, check the possible reasons listed in the following items:
Terminate = queryDrivers Description Memory Manager has problems. Terminate = UnloadNetwork Description conflicts with the real mode network driver in config.sys. Terminate = resetDisplay Description Update the video driver. Terminate = RIT indicates that the sound card or mouse driver has problems with the timer. Terminate = win32 Description Problems related to 32-bit programs block the thread. Nine, check the logos.sys file logos.sys is an image file, and the role is to show prompts "Now you can shut down your computer safely." If the file is corrupt, the above prompt information will not appear when it is turned off. The solution is to remove the logos.sys file and copy the file from the other Windows98 system to the Windows subdirectory.
10. Check the hardware to check the hardware configuration of your computer, you can use the device management as follows. Go to the Control Panel, double-click the System icon. Under the Device Management tab, make all devices under the following branches are invalid:
Graphics Soft Pan Drive Controller Hard Drive Controller Keyboard Mouse Network PCMCIA Slot Port
The SCSI controller can use the following steps to make a device in the device manager in effect: 1. Double-click the device you want to select, click the device, and then click Properties; 2. Under the "General" tab, selected "Disabled in this hardware configuration file" check box, then click OK; 3. Re-boot your system. If the problem is resolved, enabling the device that is disabled one by one and checks if there is any device conflict. Enable devices one by one in the following order: COM port Hard Disk Controller Soft Disk Controller Other Device Enables disabled devices, and check that there is a device conflict can be performed as follows: 1. Double-click to include the device you want to select. Click the device, then click Properties; 2. Enable disabled devices under the "General" tab; 3. Check the contents of the "Device List" on the Resources tab. Note that not all devices have a "resource" tag. Click "OK"; 4. Restart the system. If the problem is still not resolved, you can click "Start - Program - Accessories - System Tools - System Information", then click the Tools menu, click Auto Skip Driver Agent tool to enable all Disable the driver of the device. If the above steps are determined, the non-normal shutdown problem caused by a hardware should be contacted with the agent's agent to update the driver or firmware (Firmware, refer to the contents of the Upgrade Flash ROM). In fact, Windows 98 system is not normal to shut down, as long as we take care of it, through the above methods, it is basically able to solve your Windows98 does not properly shut down.
