Error 602 The Port IS Already Open Problem: Dial-up Network Network Due to device installation errors or is used, the reason is not available: RaspppoE does not have complete and correct installation resolution: Uninstall any PPPoE software, reinstall.
Error 605 Cannot Set Port Information Problem: Dial Network Network Since the device installation error cannot be set: RaspppoE does not have complete and correct installation resolution: Uninstall any PPPoE software, reinstall.
Error 606 The Port IS Not Connected Problem: Dial-up Network Network You cannot connect to the required device port reason: RaspppoE does not have complete and correct installation, cable failure, ADSL MODEM fault resolution: Uninstall, any PPPoE software, reinstall, check the network cable and ADSL MODEM.
Error 608 The Device Does Not Exist: Dial-up network network connection device does not exist: RaspppoE is not fully and correct installation resolution: Uninstall any PPPoE software, reinstall.
Error 609 The Device Type Does NOT EXIST Problem: Dial-Dial Network Network Connection Device It does not determine why: RaspppoE does not have complete and correct installation resolution: Uninstall any PPPoE software, reinstall.
Error 611 The Route IS Not Available / 612 The Route IS Not Allocated Problem: Dial-up Network Network Connection Routing Incorrect Reason: RaspppoE does not have complete and correct installation, ISP server fault resolution: Uninstall clean any PPPoE software, reinstall.
Error 617 The Port Or Device IS Already Disconnecting Problem: Dial-up network network connection device has been disconnected: RaspppoE is not fully and correct installation, ISP server failure, cable, ADSL MODEM fault resolution: Uninstall any PPPoE software, reinstall , Check the network cable and ADSL MODEM.
Error 619 Question: Unable to establish a connection with the ISP server: ADSL ISP server failure, ADSL phone line fault resolution: Check if the ADSL signal can be synchronized correctly.
Error 621 Can not open the phone book file error 622 Can not load the phone book file error 623 Can not find the phone book entry error 624 Can not write the phone book file error 625 Invalid information found in the phone book problem: Windows NT or Windows 2000 Server Network RAS Network Components Cause: Uninstall all PPPoE software, reinstall the RAS network components and RasppoE.
Error 629 has been disconnected from the other party computer. Please double-click this connection, try again. If this problem occurs, the situation is more complicated, because there are many cases that can cause "error 629", mostly due to excessive number of people dial in. In addition, you should all take default settings in your dial-up connection settings, such as "Enable Software Compression", "Login Network" needs to be selected. In general, this situation may also be due to the performance and quality causes of the Modem or telephone lines you have, so that there is a case where your selected communication rate cannot be established, there is a situation is: if you The phone opened the anti-theft play function, and there will be a modem when the dial is called, but the error will appear after the audio is 629. If there is an extension to make a call, the phone will call, as long as the anti-theft function is turned off. Error 630 Problem: ADSL Modem has no response reason: ADSL telephone line fault, ADSL MODEM fault (power supply is not open, etc.) Solution: Check ADSL devices.
Error 633 Problem: Dial-up network network Due to device installation errors or is being used, it cannot be connected. Cause: RaspppoE is not fully and correct installation. Solve: Uninstall any PPPoE software, reinstall.
Error 638 Question: After a long time, I cannot connect to an ISP ADSL access server reason: ISP server fault; in the bad connection created by RaspppoE, your error entered a phone number Solution: Run it created a dial-up RASPPPOE .exe Checks if ISP services can be listed to determine the ISP is normal; clear the phone number in the dial-up connection or only one 0.
Error 645 Problem: NIC does not respond correctly: NIC fault, or NIC driver fault resolution: Check the NIC, reinstall the network card driver.
Error 650 Problem: Remote Computer does not respond, disconnected: ADSL ISP server fault, network card fault, non-normal shutdown caused network protocol error resolution: Check if the ADSL signal light can be properly synchronized, check the network card, delete all network components to reinstall the network .
Error 651 Problem: ADSL MODEM Report Error Reason: Windows In Security mode, or other error resolution: When this error occurs, you can report new specific error code.
Error 676, bus line. Please try again later. Please check if there is a problem with the phone line. Please unplug the phone line. Put it directly on the phone. Use the phone number to dial (such as 163, 169). Listen to the tip that is similar to the sound of the sound Called, if there is this voice, you can dial your phone, please confirm that you are in "My Computer" -> Dial Network "->" xxx connection (your dial-up connection) "in the ISP phone number There is no other figures before, if you are dial by extension, you need to add extraline numbers and commas before the phone number, such as "0,163". If it is determined in the handset, the busy frequency is extremely high.
Error 678, the dial-in computer does not answer, and the dial-up network connection cannot be completed. Cause: 1. Connect the connection network cable between the ADSL MODEM and the NIC, so that the system cannot connect to the ADSL MODEM. 2, ADSL Modem does not have power supply, so that the system cannot connect to the ADSL Modem connection 3, and the ADSL MODEM itself has problems, so that there is no signal 4, local problem solving: 1. Check whether the cable is normal 2, check whether the power is normal, ADSL MODEM Whether the power switch is turned on and the bus is similar, mostly for accidental phenomena, sometimes because the modem just turns on the dial, first confirmed the "Line" inserted into the modem to insert the phone line (connected telephone bureau) Interface. Check if there is a problem with the phone line, please unplug the phone line, pick it up directly on the phone, and call the ISP phone number to call it (such as 163, 169), listen to the scream of the sound of the sound in listening to the listener If there is this voice, you can dial your phone, please confirm "My Computer" -> Dial Network "->" XXX Connection (Your Dial Connection) "No other before the ISP phone number Digital, if you are dialing through the switchboard, you need to add extraline numbers and commas before phone numbers, such as "0,163". If it is a line, please contact the ISP Customer Service. If there is no sound or a prompt, you can't make this phone number, then this shows that your phone line has a problem. Error 680 There is no dial tone. This error occurs, check if the modem is correctly connected to the phone line, then check the following aspects: 1, first check if the phone line is connected, if there is no problem, please unplug the phone line, directly on the phone, use the phone The ISP phone number to dial will try a try (such as 163, 169), listen to the scream of the similar fax sound in listening to the listener, if there is this voice, indicating that your phone can dial online, maybe you just dial There is a phone call in, or your modem is faulty. If it is a line, please contact the ISP Customer Service. If there is no sound or a prompt, you can't make this phone number, then this shows that your phone line has a problem.
Error 691 Problem: Enter the username and password are wrong, unable to establish a connection reason: username and password error, ISP server failure Solution: Use the correct username and password, and use the correct ISP account format (Name @ service).
Error 718 Question: Verify that the remote computer timeout does not respond when the username is disconnected: ADSL ISP Server Fault Solution: Call 2022370.
Error 720 Problem: Dialing Network Unable to coordinate the protocol settings for servers in the network: ADSL ISP server failure, non-normal shutdown causes network protocol error resolution: Delete all network components to reinstall the network.
Error 734 Problem: PPP Connection Control Protocol Statue: ADSL ISP Server Fault, Nonworthy Cause Network Protocol Error Solution: Delete All Network Components Reinstall Network.
Error 738 Problem: The server cannot assign IP address reasons: ADSL ISP server failure, ADSL users have too many IP addresses that are over ISP: call 2022370.
