Author: ycflash
This article is based on source code installation (I like this installation method: P), used to watch movies and online IPv6.
To http://www.mplayerhq.hu download
MPlayer-1.0pre5.tar.bz2
Neutron-1.5.tar.bz2
Essential-20041107.tar.bz2
GB2312-kai.tar.bz2 file, front of the skin, you will choose the next. For convenience, all operations are done under root. Ordinary users, when they modify the relevant configuration in the primary directory, and modify the appropriate permissions.
Installation decoder: Assume MPlayer installation directory to / usr / local / mplayer decoder in / usr / local / mplayer / codecs
Start the installation decoder:
MKDIR / USR / local / MPLAYER
TAR JXVF Essential-20041107.tar.bz2
MV Essential-20041107 / USR / local / MPlayer / CodeCS
Install MPlayer main program:
TAR JXVF MPLAYER-1.0Pre5.tar.bz2
CD MPlayer-1.0PRE5 /
./configure --prefix = / usr / local / mplayer --enable-gui --with-codecsdir /
= / usr / local / mplayer / codecs --with-win32libdir = / usr / local / mplayer / codecs /
--with-reallibdir = / usr / local / mplayer / codecs --with-xanimlibdir = / usr / local /
/ mplayer / codecs --enable-inet6 --language = zh_cn
Make; Make Install
CD ETC /
MKDIR ~ / .MPLAYER
cp * .conf ~ / .mplayer /
MV ~ / .MPLAYER / SAMPLE.CONF ~ / .MPLAYER / CONFIG
Parameter Description:
--enable-GUI supports the front end of the graphics
--enable-inet6 joins IPv6 support
--language = zh_cn default interface is Chinese
Copy the configuration file to the main directory, easy to personalize each user
Install skin: as Neutron as an example
TAR jxvf neutron.tar.bz2; mplayer / share / mplayer / skin / default
Install Chinese font support:
TAR JXVF GB2312-KAI.TAR.BZ2
CD GB2312-KAI / GKAI00MP24 /
CP * / usr / local / mplayer / share / mplayer / font /
Normal display, Chinese subtitles, modification, ~ / .mplayer / gui.config 21 line, SUB_UNICODE = "YES"
In the GMPlayer property configuration, make sure, Subtitile & OSD tab: Encodding: None, Unicode Subtite selected, font tab: Encoding: Unicode
Build a soft connection, don't say it, huh, huh.
At this point, the installation is complete. In some systems, for example, when watching the IPv6 video of our school, the report is wrong, which is the problem of the decoder. Solution: In the ~ / .mplayer / codecs.conf, 632 lines, WMV9DMOD.DLL's 9 removed. You can solve (non-cure) :)). BTW: IPv6 online watch, it is best to build a tunnel, the method is simple, http: //202.38.99.9 is no problem.
Brief description: 2.4 Core can download TunnelBroker, compile installation ./configure; make; make install
arriving
Http://202.38.99.9 Registered the establishment of a tunnel, requiring legal IPv4 addresses.
Load and activate the tunnel: ModProbe IPv6; TBClient Act Username Password
Test: mplayer mms: //media6.bupt.edu.cn/cctv-5, see it, huh, huh! Graphics can be started using GMPLAYER.
