Common boot.ini formats are as follows: [Boot loader] Timeout = 10DEFAULT = MULTI (0) DISK (0) RDisk (0) Partition (2) / WinXP [Operating Systems] Multi (x) disk (y) RDisk (z) Partition (q) / winxp = "Microsoft Windows XP Professional" / FastDetectSCSI (X) Disk (y) RDisk (z) Partition (q) / Win98 = "Microsoft Windows 98" / FastDeteTect Heavy Presentation [Operature Systems] section. 1.Partition (q) Indicates the sequence number of the partition where the system's root directory is located in the same quick-hard disk (Q from 1). 2.RDisk (z) If the beginning of the MULTI is started to represent the hard disk of the partition where the system's root directory is located in the hard disk sequence number (Z from 0) on the same disk controller. If the Z value is meaningless, it is equal to 0.3.Disk (y), if the Y is beginning to start in the SCSI, the hard disk where the partition where the operating system is located is located on the same disk controller. The hard disk sequence number (Y is started from 0). If the Y value is meaningless, it is equal to 0.4. If there is both an IDE disk in the computer, there is a SCSI disk (or only IDE), and the setting of the SCSI in the BIOS is set to Enable, then Multi (x) At the beginning, where x represents the disk controller where the partition where the partition where the operating system is located, the disk controller is located on the sequence number (X from 0 starts counting from 0) on the same disk controller. If there is only a SCSI controller in the computer, the SCSI (X) starts, where x represents the disk controller where the partition where the system root of the operating system is located, the disk controller where the hard disk is located on the same disk controller (X from 0 starts) count). / SafeBoot: Safe startup, only the drivers and services in HKLM / SYSTEM / CURRENTCONTROLSETCONTROL / SAFEBOOT, followed by three parameters minimal, network, or dsrepair. Minimal and Network allow the system to be launched under the network connection. DSREPAIR requires the system to transfer the settings of the active directory from the backup device. Another option is Minimal (Alternateshell), which allows the system to transfer the shell program specified by HKLM / System / CurrentControlSetsafeBoot / Alternateshell without using the default Explorer. / NOGUIBOOT: Does not load the VGA driver, the boot process and the blue screen information when failing are not displayed. / Bootlog: Write the log into the nnbtlog.txt file. / Basevideo: Start using standard VGA mode, which is mainly used to display the driver failure. / SOS: Displays its name when the driver name is transferred, and it is better to use because of the driver problem. You can easily set the startup menu through the above settings! It is known from the above, Boot.ini is a very important system file. Without it, the system will not be guided, so we usually edit its method except for its necessary backups. Especially when installing the multi-system, if the file is not in order from low to high (Windows 98, Windows 2000, Windows XP, Windows 2003), the file is often damaged. If we master the modifications and edit it, it will not be able to do it.
Modifying Windows boot boot screen 1. Open C: boot.ini with Notepad, find the line where the Windows XP startup item is located, join / NOGUIBOOT2 at the end, find your own boot screen, store it under C: / Windows Boot .bmp picture size is 640 * 480 16 colors
