1. Quick open file Double-click the background blank of Photoshop (the default is a gray display area) to open the browse window of the selection file.
2. Free to change the canvas color to select the paint bucket tool and hold down the Shift Click on the edge of the canvas, you can set the background color to the currently selected foreground color. If you want to restore the default color, set the outlight of 25% grayscale (R192, G192, B192), hold down the Shift Click on the edge of the canvas.
3. Select the shortcuts of the tool to quickly select a tool in the toolbox by pressing the shortcut, the letter shortcuts of each tool are as follows: check box - M mobile-V 索 -L magic stick-W gun -J brush -B pencil -N rubber stamp-S history brush -y eraser -e blur-r reduction -O pen-P text-T metrics -U gradient-g paint bucket-K straw-I-h-H scaling- Z Default Prospect and Background Color-D Switch Prospect and Background Color-X Edit Mode Switching the -Q Display Mode Switching - F, if we hold down the Alt key, click the displayed tool icon, or hold down the Shift key and repeat Letters shortcuts can cycle to select hidden tools.
4. Get the precise cursor Press the Caps Lock button to display the cursor of the brush and the magnetic tool as an exact cross-line, and then restore the original.
5. Display / Hide Control Board Press the Tab key to switch to display or hide all the control boards (including the toolbox). If you press SHIFT TAB, the toolbox is not affected, only other control panels are displayed or hidden.
6. Quick recovery of the default value Some things that are not good at photoshop, in order to adjust the satisfactory effect, it is a few fold. It is found that the original default effect is the best. This is stupid, and I will regret it! How to recover to the default? Try to touch the tool icon on the option bar, then select "Reset Tool" or "Reset All Tools" from the context menu.
7. The shortcuts for the free control size zoom tool are "Z", and "Ctrl Spacebar" is the enlargement tool, "Alt Spacebar" is a reduction tool, but it can be scaled with the mouse click; the same Press CTRL " " button And "-" keys can also be amplified and narrowed images; Ctrl Alt " " and Ctrl Alt "-" can automatically adjust the window to display the full screen zoom display, use this tool, you can use this tool no matter how much than the picture Browse full screen without displaying! If you want to automatically adjust the window by using the zoom tool, you can click the "Full Cable Display" option in the Properties Bar of the Scalable Tool.
8. When using a non-Hand Tool (Hand Tool), press and hold the space bar to convert to a hand tool, which is the visible range of the image within the window. Double-click the mouse on the hand tool to make the image in the most suitable window size, double-click the mouse on the zoom tool to make the image display at 1: 1.
9. When using the ERASE TOOL (eraser tool), press and hold the Alt key to switch the eraser function to the specified step recording state.
10. When using the Smudge Tool, press and hold the Alt button to apply the purely smear to the foreground color.
11. To move the word pick-up range to use the Type Mask Tool (Text Mask Tool), you can switch to the fast mask mode (switch with shortcut key Q), then move again, and then switch back to standard mode I.e.
12. After holding down the Alt key, use the Rubber Stamp Tool (Rubber Stamp Tool) to click on any open image window, you can set a sampling position within the window, but does not change the window. 13. When using the Move Tool (Mobile Tool), press the direction button on the keyboard to move the image on the layer from 1 Pixel. If you first press the SHIFT button, press the direction button again 10 Pixel Moving image. Press the ALT key to the selection will move the copy of the constituency. "The key can increase or reduce the sampling width in real time (optional tuning board) .15. Measure tool is very convenient to measure distance (especially on the oblique line), you can also use it to an angle (like a plurality of anglers) Under the premise of the information panel, select the metric tool to click and drag a straight line, hold down the Alt key from the node of the first line, then drag the second straight line, the angles and line between the two lines The length is displayed on the information panel. Drag with the measuring tool to move the measuring line (one node that can only move the measuring line only), and drag it to the canvas to the canvas.
16. Use the painting tool such as a brush, a pen, etc.), hold down the SHIFT key with the mouse, can connect two click to line.
17. Press and hold the Alt key Use the straw tool to select the color to define the current background color. Monitor the color change of the current picture by combining the color sampler tool (SHIFT I) and the information panel. The color value before and after the change is displayed next to its sampling point number on the information panel. The color mode of the sample point can be defined by the pop-up menu on the information panel. To increase the new sampling point, simply use the color sampler tool with color sampler tools, and hold the ALT key click to remove the sampling point. But only four color sampling points can be placed on a picture. When there is a dialog box (for example: color order command, curve command, etc.) pop-up, add a new sampling point, you must hold down the SHIFT button and click on Alt Shift Click to lose a sampling point.
18. The cutting tool must be used, this situation you must also encounter; when you adjust the cut grip, the cut box is more close to the image boundary, the clipping box will automatically attach the edge of the image. On, you can't cut the image accurately. However, just take the "ctrl" button when adjusting the cutting border, then the cut box will serve the post, let you crop.
Replication skills
19. Press and hold the CTRL Alt button to drag the mouse to copy the current layer or the selection content.
20. If you have recently been copied in a clipboard, Photoshop will use the size of the new figure as the size of the new map as the size of the newly created drawing when there is a new file (Ctrl N). To use this feature and use the last setting, hold down the Alt key (Ctrl Alt N) when open.
21. If you create a new work, you need a file with a file that has been opened with an open picture. Select "File" → "New", click the Windows option of the Photoshop menu bar, click on the name of the open picture name on the pop-up menu, yes, it is so simple!
22. Press the ALT key (Ctrl Alt T) when using the free transform tool (Ctrl T), then copy the original layer (CTRL SHIFT T) after the current layer is copied. In order to perform the last transformation again, Ctrl Alt Shift T is re-executed after copying the original map.
23. Using "Copying the new construction (Ctrl J)" command can complete the copy to paste and cut into paste between steps between steps; by copying (cut) ) The new layer will still be placed in the original place when it is pasted, however pasted by copy (cut), it will be attached to the center of the picture (or selection).
24. To copy the image directly without wanting the naming dialog, press and hold the Alt key before executing the "Image" → "Copy" command.
25. Photoshop's clipboard is very easy, but you prefer to use the Windows system clipboard directly to process images taken from the screen. Ok, press CTRL K, put "Outter to Clipboard" point on the pop-up panel! 26. In Photoshop, regular replication is performed when it is a layout design, we often set some elements to seek a form of beauty, and can be easily obtained by combining four shortcuts in Photoshop. . (1) Select the object you want to copy; (2) Press CTRL J to generate a floating Layer; (3) confirm after rotating and move to the appropriate position; (4) Can now hold down Ctrl Alt Shift Continuously copy the continuous objects continuously in "T". (I only hold Ctrl Shift, just regular movement)
27. When we want to copy selected objects in the file, use the copy command in the Edit menu. Copy one time you may not feel trouble, but you have to copy multiple times, and once a click, you're quite inconvenient. At this point you can select the object first, then click the mobile tool, then hold the "Alt" button. When the cursor becomes a black or white overlapping two arrows, drag the mouse to the desired position. To copy multiple times, just relax the mouse.
28. You can use the optional frame tool or a settling tool to drag the selection from one document to the other.
29. To create a replication document for the current historical state or snapshot: (1) Click "Create a new document" button from the current state; (2) Select a new document from the historical panel menu; (3) drag the current state (or Snapshot) to the "Creating a New Document" button from the current state; (4) Right-click on the status (or snapshot) Select a new document from the pop-up menu to drag a historic state of the current picture in history to another. The window can change the content of the target image. Press and hold the Alt key to click any historical state (except for the current, the most recent state) can copy it. The status that is then copied becomes the current (most recent) state. The steps in the ALT drag action can be copied to another action.
Selection skills
30. When dragging the selection zone or layer from one document, hold down the SHIFT key to place it in the destination document. If the source document and the size of the destination document are the same, the dragged elements are placed in the same place as the source document (rather than being placed at the center of the canvas). If the destination document contains the selection, the dragged element is placed at the center of the selection.
31. Click the triangle button in the upper right corner, select the load action from the pop-up menu, enter the PhotoshopGoodiesActions directory, there are buttons, specifications, commands, image effects, text effects, textures, and frames. The action set contains a lot of practical things! In addition, there is an Actions.pdf file in this directory, which can be opened with Adobe Acrobat software, which details the method of use and the resulting effect of these actions.
32. Click the brush tool in the toolbar, click the small triangle on the right side of the touchpad label in the subsequent displayed attribute bar. In the pop-up menu, click the small arrow to select "Load Brush ...". Select * .abr in the brushes folder of Photoshop Directory. It has so much lovely thing here.
33. Picture of a beautiful mark and want to reuse in the work? Good to do it, select it with a set of cable tools, select "Save Brush ..." in the pop-up menu of Brushes, then use the brush tool to select this new pen .....................
34. If you want to select a part between the two selection zones, press and hold the SHIFT and Alt keys while the existing selection area is used to drag, draw the second selection area (a multiplication number next to the mouse cross The zone that represents the coincidence will be retained).
35. Remove the square or circle in the selection area, first add any of the selection zones, then in this selection area, press the ALT key to the rectangular or elliptical mask tool. Then loosen the Alt key, hold down the Shift key, drag to you satisfied. Then release the mouse button first release the Shift key. 36. Delete a selection area from the center, in any of the selection area, first press the Alt key to the rectangular or elliptical mask tool, then loosen the Alt key once again, and finally release the mouse button again. Loosen the ALT key.
37. When you want to quickly switch the mask area or select the area option, first click on the Alt key and then move the cursor to the fast folding mode icon.
38. When using the box tool, press and hold the SHIFT button to draw the square and the regular selection; press and hold the Alt key to set the selection from the starting point.
39. Use the "Researcher command (Ctrl Shift D) to load / recover the previous selection.
40. Press the Alt key when selecting the setup tool to switch between the setup tool and the polygonal settles. Press and hold the space bar when you select the constituency. You can move the selection that is being ticked.
41. Press and hold the Ctrl key to click the icon (on the layer panel) to load its transparent channel, then press the Ctrl Alt Shift key to click another layer to select the transparent channel of the two layers. The original constituency can be retained.
43. How to use the Shift and Alt keys in the Select Box Tool: When using the Select Box, you want to expand the selection area. When you hold the Shift key, the cursor " " will become "ten ", Drag the cursor so that it can be again selected to expand the selection area you want. Or two or more selected boxes are simultaneously selected in the same parallel image. When using the "Select Box", you want to subtract redundant pictures in the "Select Box". At this time, "Alt" button, the cursor " " will become "Ten -", drag the cursor, so You can leave the pictures you need. When using the "Select Box", you want to get the part of the two selection frames, then hold the "Shift Alt" button, the cursor " " will become "ten í", drag the cursor, so you want Part of the part. When you want to get the front or square in "Selection Box", hold down the "Shift" button, you can.
44. How to use the SHIFT and Alt keys in the "Settings" tool: Add the Selection Range Press the "Shift" button. (The same as 1 of the method and "Select Box") Reduces the selection range Press the "Alt" button. (Method and "Select Box" 2 The same) Two selection frames are superimposed by "Shift Alt" keys. (Method and "Select Box" 3 identical)
45. How to use the Shift and Alt keys in the Wand Tool: Add the Selection Range Press the "Shift" button. (The same as 1 of the method and "Select Box") Reduces the selection range Press the "Alt" button. (Method and "Select Box" 2 The same) Two selection frames are superimposed by "Shift Alt" keys. (Method and "Select Box" 3 identical)
Quick key skills
46. You can quickly browse your image with the following shortcuts: Home Roll to the upper left corner of the image; END roller to the lower right corner of the image; Page Up is rolled up to the image; Page Down Below; Ctrl Page Up is rolled to the left of the image; Ctrl Page Down is rolled to the right of the image.
47. Press the CTRL button ALT button 0 key to make the image to be displayed in 1: 1.
48. When you want to "tight" (adjust the space between individual letters), first click between the two letters, then press the Alt key to adjust with the left and right direction keys.
49. Restore the settings in the dialog to the default, then press the Alt key first, the CANCEL key will become a reset button, and then click the Reset button.
50. To quickly change the value displayed in the dialog box, first click on that number, let the cursor in the dialog box, and then use the up and down direction keys to change the number. If you press the SHIFT key before changing the value with the arrow key, the change speed of the value will speed up. 51. Photoshop 6.0 adds SHIFT CTRL Z (for step-by-step recovery of the order) in addition to the frequently familiar shortcut Ctrl Z (can be switched in history and current state) ) And Alt Ctrl Z (user can be subjected to step-by-step processing) two shortcuts. Press CTRL ALT Z and CTRL SHIFT Z Combination to use these commands in the middle of history (or using menus in the historical panel).
52. Fill function: Shift Backspace opens the fill dialog; Alt Backspace and Ctrl Backspace group combination are filling foreground color and background colors; press Alt SHIFT Backspace and Ctrl Shift Backspace key combination keys in fill prospects and background The presented pixel is filled with the existing pixel (maintaining the transparent area).
53. The D key on the keyboard, the X button can quickly switch the foreground color and background colors.
54. Draw a straight pen touch with any drawing tool: first click on the start position, then hold down the SHIFT button, then move the cursor to the end point.
55. When opening the CURVE dialog box, click the Curve box after pressing the Alt key to make the grid are finer, and then click the mouse to restore the original.
56. After selecting the tool selection range using a rectangle (ellipse), press and hold the mouse and then press the space bar to adjust the position of the pick box, and then adjust the size of the selected range after release.
57. Increase a rectangle or ellipse that is drawn from the center, in an increase in any one selected area, press the SHIFT key to the rectangular or elliptical mask tool, then release the Shift key, then press the Alt key, finally loose The mouse button releases the ALT key. Press ENTER or RETURN to turn off the slider box. To cancel your changes, press the ESCAPE button (ESC). To increase or decrease the value at 10% increments when opening the pop-up slider dialog, press and hold the Shift key and press the arrow keys or the down arrow keys.
58. When previewing the CMYK mode color of the RGB mode image on the screen, execute the View "→ New View command, then generate a new view, then execute" View "→" Preview "→" CMYK "command It is possible to view images of the two modes to facilitate comparison analysis.
59. Press the SHIFT Key to Improve the Square Tool Limit box as a square or circle; press the Alt key to pull the box to draw the box from the center; press the SHIFT ALT key to move the box tool to start the square from the center Or circular box.
60. To prevent the box from using the cutting tool to adsorb on the picture border, press and hold the CTRL key when dragging the control point on the Cutting Tools box.
61. To correct the inclined image, first use the measurement tool to draw a line as a level of horizontal or vertical direction (such as the horizontal line of the image, the horizontal line between the two), and then select "image from the menu" "→" Rotating Draw "→" Arbitrary Angle ... ", will find the correct rotation angle after opening, as long as it is OK.
62. You can use the cutting tool to complete the rotation and cutting work: first draw a box with the cutting tool, drag the control point on the box to adjust the angle and size of the pick box, and finally press the carriage return to implement rotation And cut. The angle of the measurement tool is also automatically filled in the Digital Transform Tool ("Edit" → Transform "→" Number ") dialog box.
63. All pixels outside the cropping range are lost after cropping images. To cut without loss, you can replace it with the "Canvas Size" command. Although Photoshop warns you will make some cut, for some reason, it does not have all "cut" data outside the screen, but this does not work on the index color mode. 64. When combining the layer, press Ctrl Alt Shift E to copy all the visible layers to the current layer after copying all visible layers. You can also hold down the Alt key when the merge layer will copy the current layer and then merge into the previous layer, but Ctrl Alt E This hotkey does not work.
65. Press the SHIFT BackSpace key to activate the "Edit" → "Fill" command dialog box, press the Alt Backspace button to fill the foreground color; press the Ctrl Backspace button to fill the background in the background.
66. Press the Shift Alt BackSpace button to fill the foreground color into the option box and keep the transparent settings, press the SHIFT CTRBACKSPACE button to keep the background color into the Select box to keep the transparent setting.
67. Press the Alt Ctrl Backspace key to fill the selection or layer from the history, press the SHIFT ALT CTRL BACKSPACE button to fill the selection or layer in the record and keep the transparent setting.
68. Press the CTRL "=" button to make the image display continuously, but the window does not shrink; press the CTRL "-" button to continue to shrink, but the window does not shrink; press Ctrl Alt "=" button to make The image display continues to enlarge, and the window is enlarged; pressing the Ctrl Alt "-" button to make the image display continue to shrink, and the window is reduced.
69. When moving the layer and the selection, hold down the Shift key to do the movement of the horizontal, vertical or 45 degree angle; press the direction button on the keyboard to do one pixel move each time; press and hold the SHIFT button and press the keyboard The arrow keys can do 10 pixels per time.
70. When creating a reference line, press the SHIFT key to adjust the reference line to the scale scale; press the ALT key to change the reference line to change the reference line to horizontally or vertically orientation.
71. In the "Image" → Adjustment "→" Curve "Command dialog box, press and hold the Alt key to click the mouse in the grid line to make the grid line fine or rough; hold down the Shift key and click the control point to select more Control points, hold down the Ctrl key and click a control point to delete it.
72. To copy the image on a layer to another image window in a different layer, you can hold down the SHIFT key when dragging to the destination window, then the image is dragged to the destination window.
73. When using the "Edit" → "Free Transform" (CTRL T) command, press and hold the CTRL button and drag a control point to perform free deformation adjustment; hold down the Alt key and drag a certain control point can be performed Symmetrical deformation adjustment; holding down the Shift key and dragging a control point can be adjusted to scale zoom; press and hold the SHIFT CTRL button and drag a control point to adjust the adjustment of perspective; press SHIFT CTRL to drag Move a control point can be tape adjustment; press ENTER to use the transform; press the ESC button to cancel *.
74. In the color palette, press the SHIFT button to click on a color block, replace this color with the foreground; press the Shift Alt key to click the mouse, insert it as a new color block in the order; press The Alt key is clicked on a color block, and the background color is colored; press the CTRL button to click on a color block, and the color block will be deleted.
75. On the layer, channel, path tuning, press the Alt key to click the tool button at the bottom of these tunnels, and the corresponding dialog changes to the corresponding dialog change settings. 76. On layers, channels, path tuning boards, press CTRL keys and click on a layer, channel or path to load it as a selection; press CTRL SHIFT to click, add to the current selection; press Ctrl Shift Alt key and click, cross the current selection.
77. When using the layer mask in the layers, press the Shift key and click the layer mask to abandon map, there will be a red fork, indicating that the current mask is disabled, press the Alt key and click on the layer Meng Board zoom chart, the mask will be displayed in a whole image to facilitate observation adjustment.
78. In the path tuning board, press and hold the Shift key on the path to the path tuning board to switch whether the mouse can switch whether the path is displayed.
79. After changing the settings of a dialog box, if you want to recover to a previous value, press and live in the Alt key, the cancel button will turn the reset button, click on the reset button.
Path skill
80. After you click on a point on the adjustment path, press the "Alt" button, then click the left mouse button, click on it, then one "adjustment line" will disappear, then click the next path point. It will not be affected.
