Microsoft provides remote network services in Windows 2000 Server, compared with many new features than previous versions: First, remote access services can be integrated with Windows 2000 Active Directory as part of the Windows 2000 domain. Second, provide more reliable security control (eg MS-CHAP V2, scalable authentication protocol, RADIUS customer, account lock, etc.), more convenient management means (such as routing and remote access management, bandwidth allocation protocol, remote Access Policy), more remote service protocols (such as supporting the second floor tunnel protocol, supporting AppleTalk Macintosh client remote access, forwarding IP multicast communication). The remote access method adopted by Windows 2000 is a remote customer mode (corresponding to remote control mode), in which it needs to be installed on the server, or set up a remote access server. Remote clients are only different from the local client operation, and the customer uses standard tools (such as Windows Explorer) to access resources. Windows 2000 Remote Access Server is part of the Routing and Remote Access service, you can provide two different remote access: dial-up network connections; 2. Virtual private network connection.
Remote Access (RAS) allows users to use a modem and a normal telephone line to invoke a computer or computer network, and access shared resources. According to Microsoft, the dial-up connection between the two computers is a network connection. Therefore, the dial-up network provides the same set of network services with the network connected to the network card, and the different network data is only routed by the modem, not through the network card. First, what can I do for us? The following work can be implemented through the remote access service provided by the Enterprise LAN: 1. Access email; 2. Synchronous copy of the document on the network; 3. Release the print job to the network printer; 4. Access the Internet through the proxy server; 5, from the network On the copy file, or copy the file to the network; 6, access a database server.
Second, install the previous preparation of remote access 1. Prepare a dial-up server, configure the regular server! Install the Windows 2000 Server operating system on the server. It is best to set the server as the primary domain controller (ie after the operating system is installed, you must enter the configuration server "to install Active Directory). 2, install and configure a client, ordinary PC can! Install Windows 98 or Windows 2000 Professional operating system on the client. 3. Install a modem on the server and the client, and each of the normal telephone lines can also be implemented in wireless networks with a wireless card. Check that the modem installation is correct by performing the following:
Control Panel -> Phone and Modem Options -> Modem -> Properties -> Diagnostics -> Query Modem
4. Install the TCP / IP protocol in the server and the client. Third, install and configure the dial-up server 1, enter the configuration program: Click "Start" à "program" à "management tool" à "Routing and Remote Access". 2, add a dial server: Take a look at the server's left window. If the server name is "CBSW (Local)", if not, you can click "Operation" - Add Server ", select "This computer" then click "OK". 3, configure and enable remote access: Right-click "CBSW (Local)" à "configuration and enable routing and remote access" à "Next" à in "Remote Access Server" in "Remote Access" à in The protocol "Select" TCP / IP "and select" All requirements in this list "; then" Next "à in" IP Address Specify ", select" From a specified address range ", click" Next "à in the" Address Specification Scope ", click" New "à in the" New Address Scope ", to determine according to the IP address segment at the current LAN, such as the current IP address segment of the company LAN is: 192.168. 1.1-192.168.1.255, the subnet mask is 255.255.255.0, and now you can find a paragraph IP address in the address segment, you can implement multiple users at the same time;
For example, you can now fill in the "start IP address": 192.168.1.100, "Fill in" End IP Address ": 192.168.1.200, address number is: 101.
Click 'OK' à 'Next' à to select 'in' Manage Multiple Remote Access Server 'No, I don't want to set this server using radius (o)', because there is only one remote access server, then 'Next' à 'finished'. At this time, the system will take a few minutes to start the 'Remote Access Service'. Fourth, set the dial-in user 1. Create a remote access user:
Execute: Control Panel à Administrative Tools à Computer Management à users, press à new user;
New users: remote, password: remove;
The 'user cannot change the password' and 'password never expired', and then click 'Next' à 'to complete'. 2. Dial permissions to users:
Execution: Control Panel à Administration Tool à Computer Management à User àremote, press Right click à attribute;
Go to the 'Dial-in' option, select 'Allow Access' in 'Remote Access Permissions', then click 'OK'. V. Set the client (take the Windows 98 system as an example) 1. Double click on 'My Computer' - 'Dial Network', if there is no 'dial network', please enter the 'Add Delete program' added in 'Control Panel' Dialing network components'. 2, double click new connection ', the other party computer name fill in: the company dialing server, and select the correct modem. Then click 'Next'. 3, enter a phone number: You should enter the phone number of the phone line connected to the server. 4, click 'Next' - 'Complete'. At this time, the dial-up connection called 'company dial server' is created in the dial-up network.
5. Click on 'Company Dial Server' à Right Key à Attribute àtcp / IPà Property à Select "Auto Get IP Address," Automatically Get DNS Server Address ". ') Remote Access to the company LAN: Double click on' Dial Server ', then enter your username: Remote, password: remove. After about one to two minutes, it will connect to the company's server. At this time, this The desk client is functioning with the client in the company's local area network, and can be transferred, and the database is accessed!
Note:
