These days have the same version, and now write the installation process and experience.
Because it is hand, it is only written, others are slightly.
1: Installation of the system
Server configuration: HPML150, CPU 2.8G 1/2, 1G memory, hard disk 36 * 2, 1RAID array card
This is the manual, the following system is installed as a single hard disk installation. I feel that this server is really fast! It's more than PC.
.
Since the hard disk is SCSI, it must be installed before the installation. It is equipped with a floppy disk to be AD320, in the disc SOFT / HPML150 / SCSI.
The following Unix is SCO OpenServer Unix.
1) Boot with UNIX 5.0.6 CD, in the boot: prompt, enter defbootstr link = "AD320"
2) Enter all the way, install the SCSI driver
3) Light drive IDE CDROM, Master main line,
4) The following criteria is partitioned:
Project 1G memory 2G memory boot partition 150M 300M SWAP partition 1000M 2000M root partition remaining space remaining space
5) The first step is to do after the system is installed. The network card is made. The server comes with a Gigabit network card, drives SOFT / HPML150 / LAN / EEG.vol6 in the disc to play 506A patches and multi-CPU patches, which are CD Soft / HPML150 / SMP RS506A -> OSS648A -> OSS651A, you need to pay attention to the 506A patch must first install the -install this first!, More CPU patch must be installed 506A and install OSS648A and OSS651A7) This step is to change the kernel parameters, in Hardware / Kernel Manager -> "Parameters" -> Tune Parameters, select the 7 User and Group Configuration, adjust the Maximum Number of Processes Available to User (maximum number of users per process) This value is greater than or equal to the number of terminals, recommended is 256. Select the 16th item, Shared Data, adjust the maximum share of Shmmmax Maximum Shared Memory Segment Size (Bytes), from the default 524288 to 32000000 heavy chain core
