http://www.winRoute.com.cn/ 中文 http://www.winroute.com/http://www.yzce.com/ygwl/proxy/winRoute.htm Agent Knowledge (Details) Now there are many network sharing software Two ways, mainly branching the server and soft gateway, the proxy server is to share one (or more) connections at the same time, where the proxy server is the most typical is Wingate. The soft gateway method is to set a soft gateway on a computer, using the soft gateway to complete the transition and relay tasks of the Internet data, the client can access the Internet through this gateway. In this way, the setting is relatively simple, and the hardware requirements of the host are not high, it is suitable for domestic users. Such software has Sygate, WinRoute, and so on. WinRoute4.1 is the most powerful, its easy-to-use, security, strong strongness, then I will introduce WinRoute to everyone.
First, the main function of WinRoute PRO
WinRoute Pro is a set of routers, DHCP servers, DNS servers, NAT, firewalls on a proxy server software, and it is also a mail server software that can be applied to the LAN, so WinRoute Pro can not only realize all microcomputes in the LAN. Internet connection (connection mode includes MODEM, ISDN, XDSL, DDN, Direcpc, etc.), and mail management inside local area networks can realize mail exchange between local area networks and Internet. This software installation is very simple, just need to be installed on the server. Set the option interactivity and have a built-in cache function, enabling access speeds. WinRoute is a good product applied to the local area sharing Internet connection (such as Internet cafes)!
The program is not large, but the function should have, the most practical is to share the same Email account by setting the soft gateway, and can share the same Email account and do not interfere with each other. It also has the following features.
1. As a simple domain name server of the local local area network, a DNS cache can be forwarded, and the DNS domain name query information can also be forwarded.
2, you can implement the reverse proxy function in port mapping, allowing external access to some of the services provided by NAT protected internal networks.
3, it has a router's diameter function, allowing multiple computers in the LAN to access the Internet with the same IP address, and can access the external access to the firewall, automatically protect the internal network from external attacks.
4, the software supports filtering and restrictions based on IP addresses, providing security features that limit accessible URLs.
5. Use the DHCP server functionality provided by this software to dynamically assign the TCP / IP address of the computer on the LAN.
6. To ensure safety, users can define a filtering rule through this software to filter data information through the proxy server.
7. It provides a proxy server function and can set the cache to greatly improve the speed of the tour. (This feature is very useful)
8, it can also be used as an email server, using it to accept and send emails.
Currently WinRoute Pro4.1 is the latest version, you can download (http://www.tinysoftware.com/download.php) download, size 1.41m, but to remind everyone that the software is prior period before the registration license number For 30 days, different permission will be obtained after entering the corresponding licensed number. When you register, you can click "Help / About Application" on WinRoute, pop up a pair of messages, then click the Set License button in the License option bar of the information box, open the registration information box, you can enter in the text bar. Registered. As shown in Figure 1. Second, install and run WinRoute Pro4.1
Before installing WinRoute Pro 4.1, you need a operating system installed with Win95 / 98 or WinNT3.51 or higher, 32MB or more memory, and a computer with a NIC (hereinafter referred to as a server), the other clients must have The NIC, and each access is connected to the server through a network cable. At the same time, the server that must be required should be connected to the Internet and can be accessed by the local area. The way to connect to the Internet can be through the dial-up network, or via a line DDN, ADSL, broadband Ethernet, and the like. If it is dial-up access, the server only needs to install a network card. The network card is equipped with a virtual IP address; if it is a special line access, the server must install two network cards, one must be equipped with an Internet service provider provided by the legitimate Internet IP address (simultaneous As a proxy gateway for internal local area networks, a virtual IP address within a local area network is configured, and the IP address of the typical internal local area network can use the reserved IP address, such as the address of the format such as 192.168. *. *, 10. *. *. *. . At the same time, in order to protect the content security of the local area network, it is recommended not to configure a real IP address for clients within the LAN, and saves IP overhead.
Next, WinRoute is installed on the server (there is no need to install WinRoute on the client). It is very convenient to install, as long as you double-click the installer, you don't need to set it. All the way INSTALL or OK can be installed soon, and automatically restart the computer, WinRoute's system configuration can be activated. Of course, during the installation process, you can also choose the storage path.
WinRoute consists of three management tools: 1, WinRoute engine; 2, WinRoute engine monitor; 3, WinRoute management program. The WinRoute engine performs all routes and address analysis operations (including packet filtering, port mapping, etc.), WinRoute Engine Monitor is used to start and stop your WinRoute engine. WINROUTE Engine Monitor monitors if the WinRoute engine is active, which shows blue white icons on the corner of the system's desktop. The WinRoute manager provides configuration and settings for the WinRoute engine. Available in local local networks or in the Internet.
After the installation is complete, after restarting the computer, check the WinRoute engine run and start running WinRoute and run the WinRoute Engine Monitor on the WinRoute management group. A small round blue white icon (Figure 2) is displayed on the desktop under the system's desktop, which means that the WinRoute engine is running. If there is a red circular icon, WinRoute is stopped. Simply click on the mouse button on the icon and select "Start WinRoute Engine" in the pop-up menu item.
Open the WinRoute Manager, start the WinRoute Manager module, select "Start / program / WinRoute Pro, or click the WinRoute Engine Monitor icon, from the pop-up menu. You can also run Wradmin.exe from the computer in any local network. The initial login dialog will appear. An initial login dialog window will appear (Figure 3), when the management window is popped up, or presets the preset LocalHost, or enter the IP address of the WinRoute host. Enter the management username and password. Note that if the first connection, use "admin" as the username, you can ignore the password. Click "OK" to enter the main interface (Figure 4). Of course, you can set a administrator password for confidentiality. . Click on the previous Icon button on the icon bar on WinRoute, pop up User Accounts dialog box (Figure 5), in the User field in the dialog, "admin" this is WinRoute administrator user Name, double-click the username or click the "Edit" button in the dialog to pop up the Edit User dialog box (Figure 6), see it, the administrator password is set here. Enter management in the Password text box. Clear password; enter the confirmation password in the confirm text box (ie, enter the administrator password you entered above), click the "OK" button so that the WinRoute administrator password is set up. Third, WinRoute is configured on the machine
1, special line connection setting method
If you connect the Internet with a dedicated DDN, the setting is relatively simple. Before installing WinRoute4.1, the server must have two network cards, one of which is connected to the Internet, and can access the Internet, another NIC is connected to the local area, and give These two network cards set IP addresses and masks. After running WinRoute4.1, click on the eighth icon button on the Icon bar on the WinRoute main interface, or click "Setting / Interface Table", and pop up the dialog box (as shown in Figure 7). You can see that there is two network cards in the dialog window "interface / nat", one is used to connect to the external Internet, with true IP address 63.192.212.239, one is connected to the internal local area network, with virtual IP address 192.168.1.1. The way the setting is: Select the specified NIC name, double-click or click the Properties dialog box, which pops up the "Interface" dialog box, which will automatically detect the IP address of the NIC and mask. Information, in the option, the first setup option, whether the specified NAT option is allowed to use the NAT option, access the Internet card, you must select this NAT check box, and the network card of the LAN, no need to select NAT .
In the NAT dialog, NAT is "Network Address Translator", if this item is selected, translated by address, so that the computer can access the computer that is not in the same network area, in general, if the internal local area network When the NIC settings are selected, your internal network cannot access the external network; if the user only has a real IP address, you must use the NAT function. In addition, WinRoute4.1 can support the network between different network segments, and WinRoute4.1 has a good routing function.
If you need to make changes to the IP address of the NIC, you can set the "TCP / IP Protocol" in the "Network" of the Windows Control Panel. Use the mouse to select the Properties button of the protocol, then in the Open Setting box. Enter a unique updated IP address, simultaneously enter the mask parameter of the NIC is 255.255.255.0, and finally click to confirm the modification task of the IP address. At this time, the NAT dialog of WinRoute, the address of the corresponding NIC is also changed. 2, dial-up connection setting method
If you use the server to connect MODEM dial-up to access the Internet, you must set the corresponding parameters set for Modem (if you are not familiar with MODEM, you can see it very easy to see related tool books), in the Interfaces / Nat "dialog box After selecting RAS, after clicking the "Properties" button, the program will open the Dial Properties dialog box to view the properties of the dial-up network, and then click the "RAS" tab in the pop-up window, as shown.
The dialog can be divided into three sets columns, where "Settings" is used to select the desired dial-up connection, and the user only uses the mouse to click the drop-down button behind "Ras Entry" and the drop-down list below Select a dial-up connection service you need. If you want to reset other parameters for dial-up connection, you can use the "Settings" button behind the Ras Entry list box to open the Dial-up network. Once the dial-up connection is selected, you must enter the username of the dial-up connection in the "User" text bar, and enter the password to access the Internet at the "Password" text field. There are four single options at the "Connection" field, and the function order represents manual connection, connects through the command, permanent connection, according to the user needs self-customizing connection, the program default manual connection method. There are three check items under the "Option" setting bar. If the user selects the first "Hangup if iDle for ..." (idle, how many minutes automatic disconnection line) check item, you can also adjust the time, if you don't want to disconnect, The hook in front of this option is removed; select the second "Redial When Busy ..." (redial when busy tone), the user can set a required value in the subsequent setup box; third item means the disconnection Whether it is reconnected. Finally, click the "OK" button to complete the settings of the dial-up parameter, you can dial directly through the "Action / Dial" single option in the WinRoute4.1 graphics menu, of course, the user can still dial by manual. (Renewal next time)
3, set a proxy server
Since WinRoute4.1 itself is a powerful proxy server software, it supports multiple service agents such as HTTP, FTP, and Gopher. WinRoute4.1 proxy has a very prominent advantage that it can set the interruption of access to a site, WinRoute4.1 can continue to read the content of the site to the cache of the local computer. This allows the original future and read content to be quickly obtained when the user returns or accesses this site. Let's take a look at how to specifically set the parameters of the proxy server. To set such a parameter, the user first wants to select the "Settings" menu item in the menu bar, and click the "Proxy Server" command, the program opens a parameter setting box shown in the following figure, which has a total of five labels. The specific settings are as follows:
A, General (general setting)
When opening the proxy settings dialog, the program opens the content under the General tag by default. This interface provides a check item that uses the proxy server. If this item is selected, it means that the proxy server function will be used, and the specific proxy server listening is used in the following text box, the programs default port The number is 3128. It is recommended that the user will change it. When using the proxy server function, there is a setting that allows the user to select, whether the user wants to log logging for the URL accessible to the proxy server, if "Log Access To Proxy Server" check item, the access agent will be The information of the server is recorded. B, cache (cache setting)
After using the mouse click the tag, we will see a dialog as shown below.
This dialog is mainly used to set the cache. Before the cache settings, the checkboxes in front of the "cache enable" must be selected to use the cache function. Then you must enter a cache location in the local hard disk in the subsequent Cache text bar, the program default location is C: / Program Files / WinRoute Pro / Cache, if you want to choose the location, you can click " Browse "button to open the file selection dialog box to select the directory you need; you can specify the size of the hard disk cache and the size of the memory cache, specify the upper limit of the hard disk and memory cache at the Cache size and Memory Cache size. In MB, if the cache size exceeds this limit, the cache is automatically cut, and the least commonly discarded until the cache size is 85% of the upper limit. In the "Cache Option" option setting bar, there are five check items, where Keep Aborted and Continue Aborted two options, the default is Continue Aborted, that is, the user interrupts the user interrupts from WinRoute4.1 to read the site content. And Keep Aborted gives up the read. Cache FTP Directory Only This option is that the program will only cache the FTP directory information, while FTP transfer files will not be cached. The fourth check item, this value determines the number of days (animation, pictures, etc.) saved in the cache, which is downloaded from the Internet when there is a request for the object that is greater than this day number. The last option indicates whether to discard the control function of the cache directory. In the "Max Object Size" setting bar, you can specify the upper limit of the cached object size. If the size of the object is greater than this value, it will not be cached, and the user can set a corresponding value in the subsequent numeric box.
C, Time to Live (save time)
Under the above Cache tag, the USE Server Supplied Time-to-Live check is used to determine whether to use the TIME TO LIVE function, so when you activate the contents of the label, you must select the above. A check item. At this label, the user can set the specified cache service or object, and if the time saved by the cache object is greater than the specified set time, the content of the cache object will be automatically updated. The interface is as follows 11:
D, Access (access settings)
Since the WinRoute proxy server supports the filtering and restrictions based on IP addresses, the security features that limit accessible URLs are provided. You can access the URL to different user accounts or restrictions. When you use a mouse to click on the label, a program will pop up a dialog shown in Figure 12. In the Access List, you can insert a URL through the "Insert" button, use the "Edit" button to modify the existing URL, "Remove" button to delete the URL. In the "Access" setting bar, the user can limit access to the specified URL, through the middle button "add" to allow some users to access, reject certain users through the "Remove" button. It is worth reminding you here, and the member of the Admin Group is an access limit that is not subject to the proxy server. If you do not want the server to work, do not set any account, and use the wildcard "*" to restrict access to any site. E, Advanced (Advanced Settings)
Click the Advanced tab, the user can use the secondary agent service in this tab, set the domain name or IP address and port number of the secondary proxy server, and all proxy requests will be forwarded to the secondary proxy server processing.
4, set the DHCP server
Since WinRoute is used in the local area network, in order to easily assign IP addresses to each computer in the LAN, WinROUTE version 4.1 provides DHCP (Dynamic IP Address Assignment) feature, you can automatically configure local area networks through this feature. Network related parameters on each computer. Its concrete setting method is as follows: From the menu bar, select the "Settings / DHCP Server" menu command, the program will pop up a dialog shown in Figure 13 shown in Figure 13.
In the pop-up dialog, you should first select "DHCP Server Enabled", followed by "Default Option" after the "Default Option" is used, and the program will open "Change Default Options" conversation. Box, the options of the dialog provide four checkouts. If the "DNS Server" indicates that the domain name conversion function is enabled, the user can enter the DNS server address provided by the Internet service provider in the "Specify" text bar on the right. In addition, users must also select "Lease Time" to specify the release time of the IP address. After the default option is modified, click the "OK" button to return to the interface shown in Figure 13, in which you must start the client to use the dynamic IP table, click the "Advanced" button, pop up 14.
Select the first check item in the pop-up window, indicating that the client uses a dynamic IP table when the client is started, so that the client will not occupy several IP addresses, the second check item indicates that the client will automatically A dynamic IP address is obtained on the remote server. The user can then click the "New Scope" button in the graph screen, set the dynamic IP address allocation range on the pop-up dialog box, and the user can fill in a start address in the "from" text bar. Fill in the end address after the "to" text bar, enter the IP address of the mask in the "Mask" text bar, which is typically 255.255.255.0, and then click the "OK" button to complete the DHCP-related parameter settings. Of course, if the client is equipped with an IP address, you don't have to set the "DHCP Server" function, and you will name a group, then add the IP address to this group, select "Settings / Advanced / Address Groups" from the menu bar. The menu command will pop up a dialog box shown in Figure 15. Click on the "Add" button under the dialog to pop up the "Add Item" dialog box, you must name a group here, the specific setting method: In the "name" text bar in the address group option, you will then enter the name of the group, then Select type in the "Type" option in the "Address Properties" option bar, here there are three types: Host host, network / mast network / mask, network / range URL range, when you select a type, in the text bar of IP Address Enter the IP address of the client of the internal local area network, each entered the "OK" to return to the superior dialog box, you can see the IP address added to the group, the dialog provides "Edit" and "Remove" "To help you change and delete the IP address. If your client IP address is a continuous assignment, you can select the Network / Range option. Enter the starting IP address in the "from" text bar in IP Address, enter the last IP address in the "TO" text bar . This allows the client into the proxy server to provide the necessary conditions for accessing the Internet. 5, security settings
WinRoute4.1 provides two security functions, users can define a filtering rule through this software to filter data information through the proxy server. It is also possible to access the external access, and the firewall is used to automatically protect the internal network from external attacks. Where the packet filter command can set the condition of the filter packet, select the "Settings / AdvanceD / Packet Filter" menu command from the menu bar, the program will pop up a dialog box shown in Figure 17, in "incoming" Click the option to connect to the Internet. If you use the NIC line, click the option with the NIC. If it is dial, set the dial-up option such as "Dial in adapter", double-click it to pull out a "rule" rule, and then Double-click to pop up a dialog box, as shown in Figure 18. There are three main options "Source", "Destination" and "Action". The "Type" drop-down menu in "Source" and "Destination" can select the IP address and IP group that need to be restricted or allowed (from source and destination addresses). "Action" defines three single options, "permit" means that the data package is allowed to receive the packet, but "DROP" means to stop receiving the packet, but can save the information, "deny" means the reception of the denial of the packet.
Another security feature is to use the Anti-spoofing command to set the condition of anti-IP address spoofing behavior, and the above two commands are mainly used to implement security needs.
6, other settings
WinRoute4.1 is very powerful, so its specific settings are relatively large, and after detail the above important settings, there are some other settings, due to space reasons, the author cannot explain this one by one, only Briefly mention. When you click on the Advance command below in "Settings", there are some advanced settings commands, where the port mapping command maps the service port, the NAT command can set whether to use NAT for a single IP address; Time Interval is used Set the valid time zone; Interface Maintenance is used to set the connection Internet mode, and the remaining four command options are ready for configuration work. In addition, users can set the remote POP3 account of the SMTP server and management through the "Mail Server" menu item in the menu bar; set whether the DNS service is started by "DNS Server", and where to get the IP address of the lookup site; The Accounts command to set user and group information. 7, client settings
After setting up the Server end, you have to set the client. The client's setting is simple, just set the machine's gateway to install the machine IP address of WinRoute4.1. The specific method is as follows: On the client's Windows desktop, select the online leader, right-click, pop up the property dialog box, select TCP / IP again in the dialog box, select the gateway to select the gateway page, in the dialog The IP address of the machine to install WinRoute is possible, this paper is 63.192.212.239 cases, as shown in Figure 16.
When I talked about it, I believe that everyone has a certain understanding of WinRoute4.1. Through the above narrative, we can find that WinRoute4.1 is not only a proxy service, but also other network functions are quite strong, we also found that the version of the version 4.1 has a significant improvement in previous versions, adding powerful help. Function, more beneficial to the user to set up, so the author calls for friends who are going to build a local area network, may wish to try WinRoute4.1, it should be your best helper.
Manage your network with WinRoute
The emergence of the network is increasing the work efficiency, saving office costs, and facilitates life, and also gives us a unnecessary negative impact. As a network management training teacher, I often encounter such a network administrator to put forward such problems: Many teachers and students are going to work, using the Internet to see news, OICQ chat, online games, etc., so that the work is warm, and the learning results decline, Take a headache for school managers. Is there a way to guarantee that the school manager, multimedia computer room teachers can go online, other teachers cannot go online at work, students are listed in class (but to get regular mail normally). These requirements can be easily implemented using WinRoute. The author combined with the typical application environment of the general school briefly introduces the configuration method of WinRoute. In most parts of the network application environment, there is no condition access to education network, generally using telecom fiber optic cable or ADSL access. However, the number of IPs provided by Telecom is limited. In order to ensure the normal Internet access of the school, let the teachers and students can obtain the required information from the Internet, need to add a proxy server to perform address transformation (of course, the router can be realized, but because Its management is difficult to conduct specialized training for network management personnel, and the router function is relatively single, generally not in the middle and primary schools). NAT (address conversion) function The use of not only solves the shortage of IP addresses, but also plays the role of firewall. In order to efficiently utilize network bandwidth, two network cards are generally installed, an external Internet, another internal terminal network (Figure 1). In order to ensure that all network services can use normally, the easiest way is to enable NAT, NAT enabled on the external network card, and all intranet users can use the network to use the network. If you have a large number of IP addresses in the intranet, you can use the DHCP function you bring on the WinRoute itself to dynamically assign the intranet IP address. Safe and efficient management of the above configuration can achieve network connection sharing, but no access control is performed. By configuring WinRoute's packet filtering, we restrict all users to access the Internet from 8:00 am to 5:00 am, while allowing teachers to freely send E-mail. The implementation steps are as follows: First create a time period, select "Settings → Advanced → Time Interval", add a time interval in the pop-up window (Figure 2); secondly configure packet filtering, select "Settings → Advanced → Packet Filter" The intranet card is configured in the received tag (Figure 3).
Each of the diagrams is as follows: 1. TCP protocol (such as 192.168.1.188, of course, there can be more IP addresses) do not limit restrictions; 2. Any host 110 outside the TCP protocol Port access does not limit (due to the 110 port is POP3 port, used to receive mail); 3. Any host access to the Overseas 25 ports in the TCP protocol is not limited (because the 25-port is SMTP port, used to send mail) 4. Any host on any host in the TCP protocol (except for the 25, 110 port excluded above) will be rejected, including many TCP protocols such as HTTP, FTP; 5. For specific IPs in the UDP protocol Address (such as 192.168.1.188, of course, there can be more IP addresses) do not do restrictions; 6. Any host access to the Overseas 53 port in the UDP protocol is not limited (because the 53-port is the client to perform domain name analysis ); 7. Any host in the UDP protocol is an access to any port of the outside (No. 53 of the above excluded) will be rejected, including many UDP-based services such as OICQ. Note: When you add 4th, don't forget to select "Time Limit Internet" in Time Interval (Figure 4). Similar to the operation of Article 7. Access in the Internet is dominated by TCP and UDP protocols. The 110 port of the TCP protocol is used to receive mail, the No. 25 port is used to send a message, and the 53 port of the UDP protocol is used for the DNS domain name resolution, which is always open for the three ports described above. After the above configuration, in addition to 192.168.1.188 (IP address of the manager or multimedia computer room teacher machine) can access the Internet at any time, other users can only send and receive E-mail at get off work, and the time work can be arbitrarily accessed. . The filtering rules for packets in WinRoute are up to bottom, and one of the qualities will no longer continue to compare, if there is no condition, the default is allowed. According to the above rules, the user can also make a filtering rule that is more in line with itself according to the specific needs of each unit. WinRoute installation / setting WinRoute is a set of routers, DHCP servers, DNS servers, NAT, firewalls on a proxy server software, and it is also a mail server software that can be applied to the LAN, so WinRoute can not only realize all microcomputers in the LAN Sharing an Internet connection (including Modem, ISDN, XDSL, DDN, DirecPc, etc.), and you can implement mail management within the LAN, implement mail exchange between local area networks and Internet. Software installation is simple, just the server is installed. Set up simple and have built-in cache (ie cache). Is the best software (such as Internet cafes) applied to the local area network sharing Internet connection! highly recommended! The software does not enter the registration licensed number for 30 days, and enter the corresponding license number to get different permissions. The 4.1 version completely unlimited version of the licensed number is: 62E56705-53F0DC95 Let's take a look at WinRoute installation with simple settings. Download WinRoute installation software first on this site or other website, if your E text is not very good, you can download WinRoute's Chinese patch at this site. Like the installation of other proxy server software, your computer has to reach the following requirements: The required equipped: a computer installed with Win95 or WIN NT 3.51 or higher operating system and has a network card and MODEM (hereinafter referred to as host), one Taiwan or several workstation computers must be connected to the host through the NIC.
The following introduction is installed in two Windows 98, WinRoute4.1, (Note: According to the webmaster testing, the installation method under WinNT4.0 Server is basically the same as the installation settings under Win9x), before installing WinRoute, Need to determine two things:? 1. The host is already in the Internet. ? 2. The workstation can be connected to the host through TCP / IP IP IP (ie, the host can be found through the online neighbor). If you haven't sure the above two things, please get it first, and you will grow up! The installation and setting of the host: WinRoute software only needs to be installed on the host, there is no need to install WinRoute on the workstation, and WinRoute is very simple. Double-click the installer, just click on the "OK" button to get it, you There is no need to do any settings during the installation, of course, if you don't want to install WinRoute under the default folder, you can still make a simple setting when you install to specify the path you want to install. When you click on the last "OK" button during the WinRoute installation process, the computer will automatically restart. After restarting back to the desktop, you will find more than a small roundball icon as shown in the following figure. If there is a icon, then the webmaster is congratulations here, your Wingate is successful: P Or above For WinRoute installation, please see the article WinRoute settings in WinRoute. As we introduced WinRoute installation, but single installation or not, we have to do some simple settings for WinRoute, double-click the WinRoute icon on the taskbar (small round icon), you will see the following A dialog, ask you to enter the administrator password of WinRoute, because we still entered WinRoute for the first time, have not set up the password for WinRoute, so we don't have to enter your password, click "OK" button to enter WinRoute. Management interface. (WinRoute's main text, as shown below) Nothing to set a password This means that no one can enter WinRoute to enter the settings, so let's set up a WinRoute administrator password, click the USER Accounts button in the WinRoute main text. The User Accounts dialog box is popped, and one user "admin" in the User field in the dialog is the administrator user name of WinRoute. Double-click the username or click the "Edit" button in the dialog to pop up the Edit User conversation. Box, haha, see it, our administrator password is set here. Enter the administrator password in the Password text box; enter the confirmation password in the confirm text box (ie, enter the administrator password entered above), click the "OK" button so that our WinRoute administrator password is set.
In the "WinRoute Installation Guide", the stationmaster introduces the function of WinRoute with built-in NAT. Here, set the WinRoute's NAT, click the "Interfaces Table" button in the WinRoute main text (ie small in the main interface toolbar). Network card icon), will pop up the interfaces / nat dialog (as shown below): Ok, our NAT settings will be completed here, "RAS" illustration above, see it, it will be displayed as you at the host Set the icon for dial-up Internet access, double-click the icon or select this icon and click the "Properties .." button, will pop up the dialog box shown below: • Set the two dialog boxes as follows: in "Interface The "NAT" tab in the Properties dialog box is set as follows: Any name in the "Name" text box, which is typically set to the dial-up network number provided by the ISP, because the number will be displayed in manual dial, as shown below: "Dial" is dial; "hang up" is hanging. Then check the "Perform Nat With All Communication Passing" checkbox. This way our NAT is set up, that is, if you don't need agent settings on the network tool on your workstation (such as OICQ, uploading software, download software, etc.). The settings in the "RAS" tab in the Interface Properties dialog are based on your own needs. This dialog is used to set automatic dialing. If you want the host to download data on the workstation, the host automatically dials you. You can set the following: Select a dial-up data in the "Ras Entry" drop-down list.
Enter your account name in the ISP application in the "UserName" text box; enter your ISP account password in the "Password" text box. In "HANG UP IDLE______minutes", enter the idle for long time automatically hang up the interval time of dialing in "Redial When Busy____times". (Ie, the first time the idle X seconds will be dial in the idle X seconds) well, the above is the setting of WinRoute's NAT and the automatic dialing. In the "WinRoute Installation Guide", the webmaster introduced to WinRoute with built-in cache function, then let's take a look at WinRoute's proxy settings, if the settings here are incorrect, then you may not use your cache function If you click the "Proxy Server" button in the WinRoute mainmreen toolbar, the dialog box shown below will pop up: ?? Check the "Proxy Server Enabl" checkbox in the "General" tab, the port number defaults 3128, habits we set it to 80 in the "Cache" tab and then set it "Cache Enabled" and you can set your cache in the cache text box, set the cache size in "cache size", "Memory Cache Zize" Sets the memory buffer size. The setting is completed by the above setting agent section, of course, the agent setting has to match the settings on the workstation to recognize it. 02-7-10 19:06:13 Read 1 time does not need to install WinRoute on the workstation, and you don't need to install a dial-up adapter. Just set the TCP / IP. Open "TCP / IP Properties" settings: [IP address] IP address: Enter 192.168.0.2, note, can not be the same as the main computer, if there is more than one workstation, the IP of each workstation is not repeatable, such as 192.168.0.3; 192.168.0.4 ......... Subnet mask: 255.255.255.0 [WINS Address] Turns off the WINS [Gateway] Set to the host's IP (eg 192.168.0.1) [DNS] Select Enable DNS Fill in the computer name in the host (the host name can be filled in, but this computer name must be unique, can not be the same as the name of the host or other workstation computer); the domain allows it to empty; DNS server search order, fill in Your main computer IP address (such as 192.168.0.1) After filling in [Add]); domain suffix search order, let it empty; press [OK] and then restart your computer. Most of the settings on the setup workstation are completed, but there is still one of the most important settings without setting, this is the key, this setting is the setup of IE, of course, you don't set your workstation for IE. It can also be networked normally because we set the NAT of WinRoute in front.
