1. Install Windows 2000 Server in a computer that wants to set to soft routing.
2, install two network cards correctly in a computer that wants to set it to soft routing. A switch, another ADSL cat connected to the telecommunications
3. Install the TCP / IP protocol in the computer that wants to set to soft routing, and configure IP address information for two network cards (connected to the switch 192.168.1/255.255.255.0, and the setting of another cat is automatically acquired)
Soft route installation
Log in as a domain user administrator and perform the following operations.
1. Click Start / Program / Administration Tools / Route and Remote Access to open the Routing and Remote Access window.
2. Click the "Operation" menu, select Configure and Enable Routing and Remote Access commands, run the Routing and Remote Access Server Installation Wizard, click [Next].
3. Since we are here to install a router, then select the Network Router option, and click [Next].
4, usually, only TCP / IP protocols and NetBeui protocols are installed in the local area network computer, and only the TCP / IP protocol has routing functions. The AppleTalk protocol is only used in communication between Apple. Since the TCP / IP protocol is already displayed in the Protocol list, select "Yes, all available protocols are on the list" option, and click [Next].
5, this example is not installed remote access service, so "No", does not use the request dial-up to access the remote network. Click [Next].
6. Complete "Route and Remote Access Server Installation Wizard", click [Finish].
Soft route setting
1. Click Start / Program / Administration Tools / Route and Remote Access to open the Routing and Remote Access window.
2. Right-click the server name to enable the route, then click Properties, and Display the Properties dialog.
3. On the General tab, select the Router check box, and select "Only for the LAN (LAN) Routing option, click [OK].
4, in the Routing and Remote Access window, open the left directory tree "IP Routing", right-click "General", and select "New Routing Agreement" in the shortcut menu to display the "New Routing Agreement" conversation frame.
5. Select "RIP version 2 for Internet Protocol" in the Routing Protocol list, and click [OK]. Note that the RIP protocol is recommended in the small and medium network, select the OSPF protocol in large networks.
6. Right-click "RIP" in the directory tree, and select "New Interface" in the shortcut menu to display the "New Interface" dialog box for Internet protocols.
7. Select the first network interface in the Interface list box, "Local Connect", click [OK], and Display the RIP Properties dialog.
8, the RIP property takes the system default value, click [OK].
9. Repeat the above 6 to 8 operation, add a second network interface to RIP, ie "local connection 2".
Client configuration
The IP address can be selected from 192.168.0.2 --- 192.168.0.254, the mask is used in 255.255.255.0, the gateway uses 192.168.0.1
DNS Settings 192.168.0.1, the second DNS is set to telecom DNS
Install the virtual coolding program for telecommunications on the server, connect to the Internet, test the client, so that multiple machine sharing Internet access can be implemented.
