1. Set up the Some Optimization Settings of Windows Server 2003 Web Server 2.Windows Server 2003 3.WIN2003 Server
1. Set up maintenance of Windows Server 2003 web server
WWW under Windows
server
With its convenient setup, the operation has won the favor of many people. The following author will introduce how to configure a web with Windows Server 2003.
server
I hope to help the newly entitled network administrator.
First, set up a web server
The default installation of Windows Server 2003 does not configure IIS services, we need to install it manually. Enter Control Panel, Execute Add or Remove Programs → Add / Delete Windows
Assembly
"Enter Windows
Assembly
Wizard window, check "application
server
→ Internet Information Services, "OK" Back to Windows
Assembly
Click "Next" to add a good IIS service. Executing the Internet Information Service (IIS) Manager in the management tool of the control panel into the main interface of the IIS Manager (Figure), you can see the IIS of Windows Server 2003 support static sites in the figure, to perform dynamics The web is also required to set the Web service extension attribute. For example, to select "Active Server Pages" in the "Web Service Extension" list, then click the Allow button to enable this feature. Next, you can configure the Web site.
figure 1
1. The website is basically configured. Select "Properties" in the "Default Website" window to enter the Default Website Properties window, you can take a marked name for the website on the "Description" on the Website tab, if the unit assigns multiple IP addresses If you want to select an IP address that give this Web site in the IP address box; then enter the source of the website web content in the "Main Directory" tab and set the IIS default startup document in "Document". You can use http://127.0.0.1 to verify the site after clicking the "Apply" button.
2. Website performance configuration. Enter the Performance tab, you can define the bandwidth and connection number of the website access to better control the traffic of the site. Other site access is limited and more system resources are released for other sites. (Tip: In the actual qualified operation, we should adjust according to network traffic and use changes.)
3. Safety configuration of the website. In order to ensure the safety of the Web website and the server, you can use the "Authentication and Access Control", "IP Address, and Domain Limit" settings on the "Directory Security" tab, but if there is no other requirements, the default The setting is ok.
Second, IIS backup and transplantation
In order to prevent the system damage to the IIS configuration, we can use the "All Tasks → Backup / Restore Configuration" in the local computer right-click menu to back up IIS, but if this operation encounters the reloading web server or a web server When porting to another web server, we can make your arm for backing up the wizard to implement IIS's backup and transplant.
Start the software, you will list the various sites configured on the IIS server on the site list of the IIS Backup Wizard, check the site you want to back up and then click the "Export Site" button, "Export IIS Site" window in the pop-up After selecting a good file save path, "OK", the site configuration information will be saved with a txt text file.
When reloading the IIS server, run the IIS backup wizard, click the Import Site button to select the IIS site information file you want to import on the "IIS Import Site" window pop-up, "OK" Import. If you need to transplant the IIS site information, copy the backup site information file to your destination machine, and then download the installation IIS backup wizard on this machine, and execute the Import Site operation. Top of the page
2. WINDOWS Server 2003 Windows Server 2003 Web Edition: To quickly develop, deploy web services and applications, provide Web hosting and service platforms. Support 2 SMP (symmetric multiprocessing) system, 2GB memory. Windows Server 2003 Standard Edition: For small and medium-sized businesses and departmental applications. Support 4 channels SMP, 4GB memory. Windows Server 2003 Enterprise: Suitable for central and large organizations, 32-bit and 64-bit versions. Supports 8 node clusters, NUMA; supports 8-channel SMP, where 32-bit supports 32GB memory, and 64GB memory is supported. Windows Server 2003 Data Center Edition: Business-oriented enterprises that require strong scalability and high availability, with 32-bit and 64-bit versions. 32-bit version support 32-way SMP, 64GB memory; 64-bit support 64-channel SMP, 512GB memory; two versions support 8 node clusters, Numa III, Windows Server 2003 3790 version activation is not coming before the official version The popular activation is now in the following: (1) RESET5.02, running in security mode, activating, and adjusting time is no problem in 2008, everything is normal. Can be upgraded. Disadvantages: The activation program is completely masked, and it is manifested to run MSOOBE / A without any display, and there is a reset5 in the service. Then the machine will automatically run this service, C: WindowsSystem32srvany.exe, this program should be reset5 to add to the system. (2) Russian crack, remember in the XP era, just replace setupreg.hiv, then the phone can achieve the perfect activation of the realm, can be in 2003, after doing this, the current display is activated, if you Adjusting time will then boot, it will be activated, or even can't be used. Estimated the key to the second issue or in that setupReg.hiv file. (3) Someone posted a file with WinXPactiVation.exe on the forum, and claims that it can be activated. In fact, this is also a false activation, temporarily blocking the activation program, is not able to modify the time. (4) Pseudo VLK made with replacement method, there is no problem with installation, just cannot be upgraded. VLK is the 8 files that replace the English version. But SN has been sealed by Microsoft. So can't be upgraded, but this method is the most stable, there is no problem. Conclusion: It is recommended that everyone is activated and replan5.02 activation with 8 replacement activities!
Top of the page
3.WIN 2003 Some Optimization Settings 1. Disable Configuration Server Wizard: Disable "Configuring Your Server" Wizard: In Control Panel -> Administrative Tools -> Manage your server (Manage Your Server) running it, then check the page at the lower left corner of the window (Don't Display this Page At Logon). 2. Enable hardware and DirectX Acceleration ★ Hardware Acceleration: Desktop Click Right click - Properties -> Settings - Advanced - Troubleshoot. Pull the hardware accelerated scroll bar to "Full" (FULL), it is best to click "OK" to save exit. The black screen that may appear in this period is completely normal. ★ DirectX Acceleration: Open "Start" -> "Run", type "dxdiag" and enter "DirectX Diagnostic Tool", in the Display page, click DirectDraw, Direct3Dand AGP Texture Accelerates three buttons Enable acceleration. Pull the strip of the "Hardware Sound Acceleration Level" (full acceleration). 3. Enable the sound card: After the system is installed, the sound card is disabled, so set it in the taskbar after the control panel -> sound -> enabled and restart. If you are using the Windows Server 2003 standard version, please from the second step XX because the standard version has allowed sound services. ★ Open "Start" -> "Run", type "Services.msc", find "Windows Audio" in the window, and double-click it, then select the drop-down menu of the startup mode (STARTUP TYPE) "Automatic" and click "Apply" -> "Start) ->" OK "(START ->" Run ", type" DxDiag "and Enter" DirectX Tool "(DirectX Tool", in the "Sound" page, the "Hardware Sound Acceleration Level" (Full Acceleration "(Full Acceleration" ).
4. How to enable ASP support: Windows Server 2003 default installation, is not installed, it needs to be installed. After installing IIS 6, you also need to open support for ASP separately. The method is: Control Panel -> Management Tools -> Web Service Extensions -> Active Server Pages -> Allow. 5. How to enable XP desktop topic: ★ Open "Start" -> "Run", type "Services.msc", select the theme "theme" (the default is forbidden), then change to "Auto ", Press" Apply ", select" On ". ★ On the "desktop" attribute, select "Windows XP" ★ My Computer ---- Properties ---- Advanced ---- Performance ----- Used on the desktop Tab Shadow 6. Shutdown Event Tracker is also a setting of Windows Server 2003 from Windows Server 2003, which is a set of settings from Windows Server 2003. This is a necessary choice for the server, but for the workstation system Nothing, we can also prohibit it. Open "Start ->" Run "Run -> Enter" gpedit.msc ", select" Computer Configuration "->" system "-> system system in the window of the window appears. "(System), double-click" Shutdown Event Tracker "in the" Shutdown Event Tracker "in the dialog box, click and click" OK "to save after saving, so you will see similar to Windows 2000 Shutdown window 7. How to use a USB hard drive, a U disk, add a partition hard disk my computer (click Right button) ---- Management ---- Disk Management ----- Execute the import on the corresponding hard disk And allocate the disk operation 8. Display all components in the control panel: replace "hide" in the SYSOC.INF file in the WindowsInf directory. 9. Disabling Internet Explorer Enhanced Security and disable security interrogation boxes Customize the security level for setting IE in the IE tool option. The scroll bar is pulled on the Security tab to set the Internet area to "Medium" or "medium low". Custom settings Select the "prompt" to select "Disable" or "Enable". 10. Disable boot Ctrl Alt Del and implement automatic login ★ Method 1: Open the registry (run -> "regedit"), open: hkey_local_machin│software│MICROSOFT│WINDOWS NT│CURRENTVERSION │winlogon section, in this paragraph Press Right-click, create two string segments, autoadminLogon = "1", defaultpassword = "PASSWORD set by superuser administrator". Note that you must set a password for the Administrator, otherwise you cannot achieve self-start. Then, restart Windows to automatically log in.
★ Method 2: Management Tools -> Local Security Settings -> Local Policy -> Security Options -> Interactive Logon: Do Not Require Ctrl Alt Del, enabled. ★ Method 3 (Automatically login): Use Windows XP's TWEAK UI to implement server 2003 automatic login. Download: Tweak ui http://www.ssite.org/uppic/sun_pic/...003/tweakui.exe Download Download Tweakui.exe in the left panel Select Logon -> Autologon -> Check Log on the right ON AutomaticLod System Startup Enter your username and domain name (if not written), click below set password, enter the password of the username, then click OK. 11. Hidden Files Windows Server 2003 By default, all folders are displayed. If you don't want this, you can hide the way: Open any folder, choose the tool (Tools) -> Folder Options -> View (View), adjust the contents of the display system folder, hide protected operating system files, hide files, and folders. Imapi CD-Burning Services and Support Windows Image Device Services ★ If you want to enable Windows built-in imapi CD-Burning services. Do the following XX: Open "Start" -> "Run", type "services.msc", find "IMAPI CD-Burning COM Service" in the window, and double-click it, then start mode (Startup type) drop-down menu Select "Automatic" and click "Apply" -> "Start) ->" OK "(OK) ★ If you have a digital camera and scanner Image devices, you should open the Windows Image Acquisition service. Open "Start" -> "Run", type "Services.msc", find "Windows Image Acquisition (WIA)" and double-click on the window, then start mode (startup type) The drop-down menu selects "Automatic" and click "Apply" -> "Start" -> "OK" (OK) 13. Advanced Settings ★ We can modify some advanced settings for Windows Server 2003 Suitable for the application environment of the workstation.
Right click on "My Computer" - Advanced - Perform - Setting - Advanced, put "Processor Plan" Scheduling) and memory usage are assigned to "Programs". Then click "OK" (OK.) ★ Disable Error Report Right-click "My Computer" - Advanced - Click the "Error Reporting" button, The "Disable Error Reporting" appears and checks "but notifies me when serious errors" occurs (But, Notify Me When critical Errors Occur.) ★ Adjusting some friends of the virtual memory often Shutdown and cancellation slowly feel that the work is no, the solution is to disable virtual memory so your logout and shutdown time may speed up. Right-click My Computer - Properties - Advanced - Performance - Setting - Advanced, click on "Virtual Memory" ) Part "Change" and then select "No Page File" in the window. Restart the system. 14. accelerate up and running fast ★ modify the registry to reduce pre-reading, reducing the waiting time progress bar: Start → Run → regedit start the Registry Editor, HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSessionManagerMemory ManagementPrefetchParameters, there is a key named EnablePrefetcher, its value is 3 , Change it to "1" or "5". Find hkey_local_machinesystemcurrentcontrolsetControl, set WaitTokillServentimeout to: 1000 or less. (Original setting: 20000) Find the HKEY_CURRENT_USERCONTROL Panelsktop key, change the waittokillapptimeout of the right window to 1000, (original setting: 20000) is only waiting for 1 second. Change the HungappTimeout value to: 200 (original setting: 5000), waiting for the program to wait for 0.5 seconds. ★ Let the system automatically turn off the program that stops responding.
Open the Registry HKEY_CURRENT_USERCONTROL PANELDESKTOP button, set the AutoEndTasks value to 1. (Original set value: 0) ★ Disable system service QoS start menu → Run → Type GPEDIT.MSC, appear "Group Policy" window, expand "Management Template" → "Network", expand "QoS packet scheduler", Right button right click "Limit Reserved Bandwidth", "Settings" in "Setting" in the properties, "Restriction Reserved Bandwidth", select "Disabled", is OK. When the above modifications are completed and applied, if the "QoS Packet Scheduler" can be seen in the General Properties tab in the network connection property dialog box. Description Modification is successful, otherwise the modification fails. ★ Change the speed of the window pop-up: Find the hkey_current_user \Control Panel \ DESKTOP \WindowMetrics sub-key branch, find the MINanImate key value in the window, the type of REG_SZ, by default is 1 value of 1, indicates that the open window is displayed Animation, change it to 0, prohibit animation display, followed by selecting the "Logout" command from the Start menu to activate the modifications you just made. ★ Disable Windows XP compression function: Click "Run" under "Start", enter "Regsvr32 / U Zipfldr.dll" in the "Run" input box, and then press Enter key. ★ Set personality start messages or warning information: Personalized Windows XP boot: Open the Registry Editor, find hkey_local_machine@wwware\microsoft 帖子 帖子 帖子, Double-click LegalnoticeCaption July, Open "Edit String "Dialog, enter your own information title in the text box under" Numerical Data ", such as" buddy, hello! ", Then click" OK "and restart. If you want to change the warning message, you can double-click the LegalNoticeText health name. In the "Edit String" window that appears, enter the warning message you want to display, click OK, restart. 15. Installing Java VMWindows Server 2003 No integrated MS Java VM or Sun Java VM, you can download and install it yourself. 16. Installing the DirectX 9A is the same installation DirectX 9A on Windows Server 2003 and the method of installing DirectX 9A on other versions of Windows. DirectX and Graphics Acceleration must be enabled before installation. 17. Available anti-virus software and firewall: Symantec Norton AntiVirus Corporate 8.01Zone Alarm 3.7.159norton Personal FireWall 2003 page top
