Example ghost.exe -clone, mode = copy, src = 1, dst = 2 - Sure Hard disk pair ghost.exe -clone, mode = pcopy, src = 1: 2, DST = 2: 1-Sure will be hard disk The second partition is copied to the first partition of the second hard disk ghost.exe -clone, mode = PDUMP, SRC = 1: 2, DST = G: \BAC.GHO to make the second partition of the No. 1 hard disk Image files are placed in Ghost.exe -clone, mode = pload, src = g: \BAc.gho: 2, DST = 1: 2 There are two partitioned image files in the interior, put the second partition Restore the second partition ghost.exe -clone, mode = pload, src = g: \BAc.gho, DST = 1: 1 -fx -ssure-rb restored the C drive with the BAC.GHO file of the G disk. No information is displayed after completion, start directly. ghost.exe -clone, mode = loading, src = g: \BAC.GHO, DST = 2, SZE1 = 60p, SZE2 = 40P restores the image file to the second hard disk, and modify the partition size to 60:40 The restore disk first makes a startup disk, contains config.sys, autoexec.bat, command.com, io.sys, ghost.exe file (can be done with the program that can start the disk with Windows). Autoexec.bat can include the following command: ghost.exe -clone, mode = pload, src = d: \bac.gho, dst = 1: 1 -fx -ssure -rb utilizes the file automatic restore in the D disk, after the end Jump out of Ghost and restart. Automatically make a backup of the C area, generate a backup file bac .gho in the D zone. Ghost.exe -clone, Mode = PDUMP, SRC = 1: 1, DST = D: \BAC.GHO -FX -SURE -RB restore disc contains files: config.sys, autoexec.bat, mscdex.exe (CDROM executive ), Oakcdrom.sys (ATAPI CDROM compatible driver), ghost.exe config.sys content is: device = oakcdrom.sys / d: IDECD001 autoexec.bat content is: mscdex.exe / d: IDECE001 / L: Z ghost - Clone, Mode = LOAD, SRC = Z: \BAC.GHO, DST = 1: 1 - Sure -RB can modify the instance -clone according to the following detailed explanation must be added to the parameters, it is also all Switch {Batch Switch One of the most practical features, below is the parameters defined by Clone, MODE = {COPY | LOAD | DUMP | PCOPY | PLOAD | PDUMP}, SRC = {Drive | File | Drive: Partition}, DST = {Drive | file | drive: Partition} Mode Specifies which Clone to use the command Copy hard disk to the hard disk replication (File to Disk Load)
DUMP makes the hard disk into an image file (Disk to file dump)
PCOPY partition to partitioning (Partition to Partition Copy)
PLOAD file restore to the partition (File to Partition LOAD)
PDUMP partition backup The image file (Partition to file dump) src specifies the location mode and its meaning of the source partition used by GHOST runtime: MODE command corresponds to the parameter example of the parameters used by the MODE command SRC COPY / DUMP source hard disk number. Take 1 to the first hard disk
Load Image File Name G: /back98/setup98.GHO or Device Name (Drive)
PCOPY / PDUMP source partition number. 1: 2 represents the second partition of the hard disk 1
The PLOAD partition image file name plus the partition number or the drive name plus the partition number. G: \Back98\Setup98.gho: 2, represents the second partition in the image file
DST runs the target position mode and its meaning when running GHOST: the Mode command corresponds to the parameter example of the parameters used by the MODE command DST COPY / DUMP destination Hard disk number. 2 represent the second hard disk
Load hard disk image file name. Example g: \Back98\Setup98.gho
PCOPY / PLOAD destination partition number. 2: 2 representative, hard disk 2 second partition
PDUMP partition image file name plus fragmentation number. g: \Back98\Setup98.gho: 2
SZEN specifies the size of the partition used by the partition used n = xxxxm Specifies the size of the n-destination partition to indicate the size of the partition 2 of 800MB n = MMP specified the destination N of the entire hard disk is a percentage of MM. Other parameters -FXO When the source object appears bad blocks, forced copying continues -FX does not display "Press Ctrl-del To Reboot" directly after Ghost complete the new system.
-IA fully performs replication of sectors to sectors. When a partition is replicated by an image file or by another hard disk, GHOST will first check the source partition, and then determine whether to copy the file and the directory structure or to make an image replication (sector to sector). The preset is this form. But sometimes, a specific location in the hard disk may put some hidden files related to system security. Only by using the sector to the sector copy to copy -PWD and -PWD = X to image file encryption
-rb After restoring or replication, let the system restart
-sue can be used in clone. GHOST does not display "Proceed WITH DISK CLONE-DESTINATION DRIVE WILL BE OVERWRITEN?" Prompt information
