First put the A1000 on the rack, there are two SCSI port behind the A1000, one is connected
On the SUN server, on the SCSI array card, another connected terminal. Built before starting the power
It is useful to open the plates in front of the A1000, which is useful, you can judge whether the light of the hard disk is bright.
When you do RAID5 in the future, you can see the hard drive's light in the flash.
Not to mistake it as a dead machine.
Ensure that everything is connected normally, start the A1000, then start the Sun server, in the OK status
Under the boot -r, the Sun server is restarted. In the process of boot, the address may appear
There is a problem with warning, don't pay attention to it. After logging in with root, Format If you see 0, X
XXXX, 1, XXXXXX, that means that your front connection is doing well. Choose your array, one
It is 1. In the Format state, the P, enter the partition state, and then play P, which will see a list of partitions.
See how much the number in front of the / usr is, for example, 6, when combined, when you just start format commands
Display your confirmation, you can determine the "name" of your array, such as C1T4D0S6. You need to install
The A1000 comes with the software RAID Manager.
There are two ways to install RAID Manager, one is called SWMTOOL, OpenWindow
The interface is carried out, this way is rotten, during the installation process, sometimes stop, you are not
Know what happens. It is recommended to use pkgadd to carry out the CDROM on MOUNT,
# / Usr / sbin / pkgadd -d / cdrom / cdrom0 / product pakage_name. There are 5 Pakage you will fully install them. #SHUTDOWN -Y -I0 -G0.
After start, find / usr / sbin / osa / rm6, you can see a few functions, you can build LUNs
Do RAID5, very gui's thing, don't say it, explain that when you do RAID5, speed
slower. After completing the RAID5, add a line in / etc / vsftab, the format photo, whether it is boot
Automatic mount writes NO. Create a named / data, restart, in the root #mount / data
What file format does not meet what the file format will be prompted. #Newfs / dev / rdsk / c1t4d0s6 is OK, then change the Vfstab, change your line NO to Yes. You can automatically automatically when you start it.
Under / data.
