There are many wires in home renovations that need to be buried, the most common power cord, telephone line, network line, television signal line, and various lines of the sound system in our listening room. Usually decorating the transaction is complicated, and we can't give sufficient attention to this block. The construction party will not mention, very few professional electricians provide you with regular electrical construction. If these hidden projects are handled properly, they will give not worrying from the future of electrical construction and future use, or even irreversible losses. So we need to understand and master some decoration knowledge, so as not to regret it! If your ground is a floor, no matter whether it is composite or solid wood (bamboo), I suggest that you put the wires as much as possible on the wall behind the skateboard, just in the wall, the door or wear the wall, etc. After the tube is connected to the kickboard, there is no dead bend in the middle of the line tube, and the lead wire is kept in the tube. When the floor is finished, it will take the electric wire when it is not installed. Wait until you have the skirting board, you will not see the traces of any traces, very beautiful. This kind of construction method has the following benefits: 1. Since the floor is in the final stage of the decoration project, the floor is then threaded, and it can effectively prevent accidental damage to the wire during a long construction; 2, you can There is a more sufficient time to choose the right wire; 3, when you want to change the line, the plus line can, remove the kick board, you can construct, very convenient; 4, because the line management does not take the floor, so you don't have to cut the solid wood (bamboo The wooden keel (except the line tube and the wooden keel movement), thereby improving the quality of construction, reducing and even avoiding the solid wood (bamboo) flooring; can also prevent broken keel in the northern region , Solid wood (bamboo) floor seam is influential due to dryness, 5. It can save money to buy tubes. In fact, workers paving flooring are also unwilling to construct a wire tube that is covered with spider web, because it will affect construction speed and quality. This is a construction method that benefits both parties. If your floor is a laying brick, the wiring is preferably a bidding tube. The function of the line tube is not only protective wire, which also has the function of easy to change the line. Therefore, the middle of the pre-buried tube must first have a right angle to die, to solve the turning problem with the way to bend, so that the wire can be freely in the line tube. Secondary line tube is preferably used in plastic coils (a kind of half-hard, translucent, normal building construction, which makes no connector in the middle of the line tube, which is not a card when threading. If there must be a connector in the middle, you should use the method of size head to plug, and the direction is uniform. Then there is no urgent thread in the line tube during the construction, but first wear the lead wire, wait until the final electric wire is replaced, this is very important! The benefits of this construction method are not self-cleaning. Finally, it is emphasized that strong weak electricity should be separated. The power cord belongs to the power, the larger the load, the stronger the electromagnetic wave interference generated, so the power cord should be taken separately from the weak current and low voltage wires as much as possible. The above, all of which belong to the green decoration, as long as we ask for a request, each decoration team should be able to do unless they deliberately cut the work.
