There is no machine around you can be installed, and you can only sort it according to the previous installation memories and online information. In fact, the installation of the SCO should be relatively simple. If you have difficulty in installing the process, welcome to discuss. I. Install the environment and preparation of work system version: SCO OpenServer 5.0.6 Target Machine: General Industrial Control (PIII, 40G, 256M, Normal Motherboard and NIC) Description: If the machine is a new configuration, a certain problem may occur, Some network cards need to know the address and interruption, trouble. Second, start installation to put the SCO OpenServer 5.0.6 installation disk into the CD drive, turn on the host and set the boot from the optical drive; when the boot: prompt appears, press Enter to start the system; start, some prompt information and introductory Things, the carriage return is immediately; when choosing the installation media, choose CDROM, but pay attention to your CDROM is the Lord or from if it is not sure, try it. If not, the next step will prompt you, return to change it; after correct, the system will search and set preparation before installation. Enter the authorization code after it is complete. Tab (Tab and Space Key often use) to the Accept Above Choices option Enter; After verification, select the installation mode, select the new installation (FRESH); three, after the installation settings go to the next screen, you need to enter some system information ( In the parentheses, the content is entered): [1] system name: Host name (scoosys1) [2] domain name: Enter a domain name (do not) [3] Security profile, select Traditional [4] Time Zone: Press the space button, then The screen prompts the title "Time Zone" dialog box. Move highlights to "Geographical Area:", enter spaces, and the screen prompts a regional list box. Use the up and down button to select "Asia" and press. Make the screen back to the dialog of "Time Zone", move the highlight to "Asia Time Zone", enter space. The screen prompts a time zone list box, select "China Standard Time (CST)" and carries with the Upload button. [5] Language: Press the split, select Standard C (English) Tab to Accept Above Choices, and the button will go to the next screen. Enter the following options: [1] standard enterprise system configuration: yes [2] lightweight character terminal configuration: no [3] if you run large database products, choose the following: database services: noTab to accept above choices, into the next screen key . At this point, you should pay attention to the hard disk selection does not check the disk (None), otherwise it will take a long time, other default immediately (perhaps below # 1, forget).
