/ / Out from www.vchelp.net Run the DOS program copy screen in Windows DOS window, Graffix, calibration should be divided into two main steps with Graffix to complete the gramphock operation: first capture the screen as ATF Format, then convert the ATF format to GIF or PCX image format with the included conversion tool. 1. After the ATF file 1 After entering pure DOS, enter "DGFX" after the command line and enter the carriageway, the usage prompt will occur (Figure 1), you can see that the capture hotkey is "C T r L a L T Spacebar". Tip: Uninstalling this program from memory is "DGFX / U". 2 After running the program that needs to grasp, then press the hotkey, press the hotkey, the screen pops up (Figure 2), pressing the file name After pressing the F1 button to capture the picture as an ATF format, if you press the e nter button directly, Then get the TXT text format. Tip: If the program screen to be grasped itself is a graphics mode, it will directly obtain a file in GIF or PCX image format, so that the conversion step can be omitted. 2. Converting the ATF to the GIF / PCX image format ATF format image cannot be identified by Windows Applications, so we need to convert the ATF format previously captured to GIF or PCX format. 1 Enter "A2B" after the DOS prompt, enter, enter the ATF file name, then display the content of the ATF file on the screen. 2 Press the hotkey "Ctrl Alt Space" again, "Save in Which Format, Gif or PCX (G / P)" prompt (ask you to save the file as GIF or PCX format), if you press Let the letters g, turn the ATF to GIF formats by the following steps; if you press the letter "P", you can get the PCX format. 3 Enter the main file name of the file to be obtained and enter. Now enter the software directory to see, is it a GIF or PCX image file you need? Tip: For the unregistered Graffix software, there will be software copyright name flags at the top of the image, which can be removed in the image processing software. The ATF format arrested by the Graffix software mentioned above can be converted to get a common image format, which is really troublesome. Moreover, it supports certain DOS Chinese systems, the Chinese characters can't display correctly, so a more direct way is to capture the standard image format after grasp. In this regard, the author often uses P i x E l P O P and D O S Capture. Second, Pixelpop, capture the GIF format more simple PixelPop can directly capture the DOS screen to GIF image format, and there is no copyright text in the captured picture, you can use it directly without processing. First, enter the software where the software is located, run the batch file "pp.bat", display the capture hotkey and image save location on the screen (the default will generate the GIF file starting in the software installation directory, Each time the hotkey is pressed once, the serial number begins from 0 0, such as screen00.gif, screen01. GIF, etc. (Figure 3). Press the hotkey "S Hift Printscreen" when the screen to be grabbed It can be grabbed to this screen and save it.
