For a Windows Me's boot disk Although the Windows 98's startup disk is also good, but compared to Windows Me, the function has a certain gap, especially the fdisk does not support the hard disk of 64GB or more, even more Today, today, it is obvious that our needs can not be met, so it is recommended to use the startup disk of Windows Me. Didn't install Windows ME? It doesn't matter, to
Http://utils.skull-tech.com/bootdisks/bootme.exe
Download the Windows ME boot disk production, just insert the floppy disk into the floppy drive, then double-click to run bootme.exe to complete the production. Change a super partition tool Windows boot disk in the fdisk is a bit weak, it is recommended to have only more than 100 KB SPFDisk 2000-03J, which provides full Chinese (traditional) interface, integration zone; rapid formatting, multi-system management. Multiple file systems, such as NTFS, EXT2, etc. Please see:
Http://dl.pconline.com.cn/html/1/2/dlid=7622&dltypeid=1&pn=0&.html
. Give the boot disk to get more space, first to delete some unnecessary files. For example: readme.txt, help.bat, readme.txt, scandisk.ini, scandisk.exe, drvspace.bin, debug.exe, chkdsk.exe. The labeling disk device driver is driven by the CD-ROM drive in addition to the OakCdrom.sys, and the remaining drivers can basically be deleted. In addition, some masters replace the corresponding files in PC-DOS or FREEDOS (except for Format, SYS, SYS, etc., other external commands, etc., other external commands), even for IO.SYS. Surgery, remove the Windows boot screen. For the activation of blood transfusion blood 1: msdos.sys Capacity: 1.67KB Get: C: \msdos.sys Efficacy: Boots can boot computer from DOS to Windows. The boot disk created by the usual method can only boot into MS-DOS (because its content is empty), and the key entering Windows is C: \msdos.sys, so copy it to the startup floppy disk, replace the same name file, so Let the boot floppy disk directly into Windows. Blood 2: DUSE 4.4 Capacity: 52KB Getting place:
http://www.pocketec.net/downloads/duse_4_4.zip
Efficacy: DUSE allows DOS to support USB devices, support various USB interfaces (including OHCI, UHCI even EHCI interface) and many types of USB drives, such as most USB hard drives, USB drive, USB flash drive, USB ZIP Drive, USB MP3 player, etc. Download DUSE and extract it to the boot disk, plus a line in the config.sys of the floppy disk: device = a: \duse.exe or execute Duseldr A: \ Duse.exe in the DOS command line. Now you can read and write the USB hard drive under DOS. DUSE can also add a lot of parameters, please refer to the help file of the software. If you want to load a USB optical drive, in addition to loading the DUSE driver, you also need to run the optical drive extension driver, you can use the Mscdex.exe with DOS. DUSE's default CD-ROM device name is USBCDROM, which can run Mscdex.exe: MSCDEX / D: USBCDROM /. Blood 3: XZL 2.0 Capacity: 53KB Get: http://home.cfe21.com/firststep/dos/xz.zip Efficacy: Pocket Dragon Chinese Character System, the smallest Chinese character system under DOS, allows DOS to display Chinese files Name, type xzl.com to load it. Blood four: DOSLFN 0.32O capacity: 11kb Getting place: http://www-user.tu-chemnitz.de/~ HEHA /HS_FREEWARE/DOSLFN.ZIP Efficacy: Make DOS to support long file name, run DOSLFN.COM directly That is, use the DIR command to see, is it a long file name? Blood 5: NTFSDOS.EXE Capacity: 51.9KB Getting place: http://dl.pconline.com.cn/html/1/2/dlid=6872&dltypeId=1&pn=0&.html
Efficacy: NTFS partition can also be accessed in DOS. Different NTFSDOS.EXE and NTFSHLP.VXD to the floppy disk, and you can access NTFS partition under DOS by running NTFSDos.exe. Loaded NTFS partition drive character is at the end. Blood Six: SmartDrv.exe Capacity: 44.3KB Get: Installation CD The \Tools \ OldMsDoS or Windows \Command Directory: SmartDRV is a disk cache, which can greatly speed up the installation speed of the operating system after loading. It is recommended to write it directly into the autoexec.bat file (A: \SmartDRV) to load it when you start. In addition, when GHOST backup or recovery, you can also load this program before performing the following operation, which can greatly increase the speed of GHOST backup or recovery. If the added file exceeds the floppy disk capacity, you can pack these files into the ebd.cab file by some tools that make CAB compression packages. Because after the startup disk is running, they will automatically decompress them into the virtual disk. do you know? The startup floppy disk can also access the "online neighbor" first: run the Norton Ghost 2003 Chinese version, click "Ghost Utilities", click "Norton Ghost Boot Wizard" on the right side of the window. After selecting a "Drive Mapping Board" in the pop-up window, click "Next"; Step 2: Select the type of network adapter installed in this machine (Ghost 2003 has a common network card driver, if the unit network driver is not listed In the middle, you can choose the "Add" button to add the network card driver. After selecting the NIC type, click "Next"; Step 3: Select the DOS version in the boot disk is to use MS-DOS or PC-DOS, choose Click "Next"; Step 4: In the Open Network Client Configuration window, enter the native name at the Client Name, enter the name when you log in to the network at the "User Name", After entering the login domain name, click "Next"; Step 5: In the Settings Network Client Address window, you can select "DHCP specified IP settings" mode, if your LAN is using a static IP address, you can enter the customer. IP address, subnet mask, gateway, etc. After the setting is complete, click "Next" to insert a formatted floppy disk in the floppy drive in the floppy drive in the floppy drive. Step 6: Use the floppy disk to start the system, log in to the network after entering the user login password. Enter: Net View under A: \>, all user machine names in the same work group will be listed; enter the command: Net View \\ntyqsrv0, you can view the shared resources on the NTYQSRV0 server; enter: Net Use Y: \ \Ntyqsrv0 \ysxw, you can virtualize the Y disk of the YSXW folder in \\ntyqsrv0. Super Universal MS-DOS boot disk "Super Universal MS-DOS Boot Disk" function is very powerful, such as: Multi-Configure Startup menu, fully supports the Chinese and English Director file name, (v) FAT12 / 16/32 and NFTS file system, USB drive (Such as USB hard drive, USB drive, U disk, etc.), large hard drive, various types of optical drive support (IDE, SCSI, USB), mouse operation, powerful system maintenance, various compression package support, graphical mode file management , Can directly start the Windows 3.x / 9x, the compression processing of the files in the boot disk. Its download address is: http: //km167.onlinedown.net/down/mdos71bd.zip.
